• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.143-153
• /
• 2021

Purpose: The purpose of this study was to analyze data from the Ministry of Health, Safety and Health and the Ministry of Employment and Labor, and the total number of deaths (disease + accidents) reached 2,020 in 2019 and the estimated economic loss was 27.6 trillion won. This is believed to be the time to present improvements to ensure that economic loss estimates are steadily increasing as in Table 1, and that government-level losses can be drastically reduced. Method: In this study, factors were selected through prior research, and reliability analysis, technical statistics and correlation analysis, and multi-term analysis were conducted through the Jamovi program for the analysis of results. Result: Multiple session analysis was conducted to verify the research theory indicated in this study, and the analysis showed that mechanical and management factors did not affect the fall death accident of the opening, and human factors, material and environmental factors had a static effect. In addition, mechanical and administrative factors do not affect the fall of the outer wall, and human and material and environmental factors have a static effect. Conclusion:: As a result of analyzing 450 falling deaths over the past 13 years among the data posted to the Korea Health and Safety Corporation, the most common causes of falling deaths were the openings and outer walls.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.638-649
• /
• 2020

Purpose: The objective of this study is to evaluate the load carrying capacity of a target bridge structure based on the simple slab bridge of concrete over 20 years of public service. Method: By performing static loading test and dynamic loading test, the displacement, strain, impact factor, and natural frequency values were measured and evaluated through analysis method. Result: The main results of this study are as follows. First, the maximum displacement and maximum strain of S1 were assessed at 2.917 mm and 44.720 𝜇ε( tensile) and -13.760 𝜇ε(compression), respectively, with S2 maximum displacement and maximum strain being 2.100 mm and 4.870 𝜇ε(tensile), respectively. Second, the maximum measured impact factor was 0.191 in section S1 A-A, and the maximum measured impact factor was 0.155 in section S2 C-C. Third, the natural frequency was assessed at 6.086 Hz, and the measurement was found to be within the range of 6.152 Hz to 6.738 Hz. Conclusion: The tested bridge may be evaluated to show good behavior and characteristics for the design load.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.216-230
• /
• 2023

Purpose: The purpose is to prevent accidents by predicting disasters through the analysis of near-miss. Method: In this study, a near-miss literature review and data were collected at construction sites, and a questionnaire survey was conducted to use logistic regression analysis and decision tree analysis to classify the possibility of near-miss connection. Result: As a result of analyzing the effects of near-miss types on mental, physical, and safety habits and behaviors, the factor with a high influence on the body is the need for near-miss management, the type of job is electricity·information communication, and health status in order, and the mental factor is the construction scale The influence was high, and the factors with the highest influence on the habit behavior factors were analyzed in the order of experience, number of serious injuries, and occupation in order of illusion, inappropriate work instructions, and body parts. Through decision tree analysis, factors and patterns that affect the possibility of a near-miss being a surprise accident were identified. Conclusion: Construction site officials consider the observation of near-miss and mentally and physically. Specific management of the relevance of physical aspects to near-miss should be implemented, and a work environment in which serious accidents are reduced is expected through personnel allocation, work plans, work procedures and methods, and feedback so that inappropriate work instructions do not lead to near-miss.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.345-352
• /
• 2023

Recently, the risk of snow disasters has been increasing South Korea. The damages of heavy snow were categorized into direct and indirect. Direct damage is usually the collapse of buildings as houses, greenhouse or barns. Indirect damage is various, for example, traffic congestion, traffic acident, drop damage, and so on. In South Korea, direct damage is severe in rural area, mosty collapse of greenhouse or barns. However, indirect damage such as traffic accident is mostly occurred in urban area. Therefore, the regional characteristics should be considered when vulnerability is evaluated. Therefore, in this study, the PSR and DPSIR method were applied by regional scale in South Korea. The PSR evaluation method is divided into pressure, state, and reaction index. however, the DPSIR evaluation method is divided into Driving force, Pressure, State, Impact, and Response index. the DPSIR evaluation method is divided into Driving force, Pressure, State, Impact, and Response index. Data corresponding to each indicator were collected, and the weight was calculated using the entropy method to calculate the snowfall vulnerability index by regional scale in South Korea. Calculated heavy snow damage vulnerabilities from the two methods were compared. The calculated vulnerabilities were validated using the recent snow damage in South Korea from 2018 to 2022. Snow vulnerability index calculated using the DPSIR method showed more reliable results. The results of this study could be utilized as an information to prepare the mitigation of heavy snow damage and to establish an efficient snow removal response system.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.916-923
• /
• 2023

Purpose: Looking at the status of fatal accidents in the construction industry in the 2022 Industrial Accident Status Supplementary Statistics, 27.8% of all fatal accidents in the construction industry are caused by construction equipment. In order to overcome the limitations of tours and inspections caused by the enlargement of sites and high-rise buildings, we plan to build a model that can extract construction equipment using computer vision technology and analyze the model's accuracy and field applicability. Method: In this study, deep learning is used to learn image data from excavators, dump trucks, and mobile cranes among construction equipment, and then the learning results are evaluated and analyzed and applied to construction sites. Result: At site 'A', objects of excavators and dump trucks were extracted, and the average extraction accuracy was 81.42% for excavators and 78.23% for dump trucks. The mobile crane at site 'B' showed an average accuracy of 78.14%. Conclusion: It is believed that the efficiency of on-site safety management can be increased and the risk factors for disaster occurrence can be minimized. In addition, based on this study, it can be used as basic data on the introduction of smart construction technology at construction sites.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.63-73
• /
• 2017

As more and more the number of a couple working together for living has increased and an interest in early education has risen, daycare centers have made an effort to provide effective and good service beyond 'nursery care'. The most important thing in building in the event of disasters is safe evacuation of occupants. Having 'safe evacuation route' is required to reduce damage caused by disasters, It is necessary to give continuous and repeated training for right evacuation to infant and children so that they can evacuation successfully. This study examined problems that need improvement so that evacuation instrument installed in daycare centers can be used better by analyzing a survey of evacuation related facilities on daycare centers. This study found that laws and regulations on safety should be improved, evacuation facilities prepared against should be maintained regularly by relevant authorities, training for coping with disasters should be provied and evacuation instruments which are suitable for children.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.458-471
• /
• 2020

Purpose: In Korea, the frequency and frequency of earthquakes are increasing every year. Therefore, the purpose of this study was to compare and analyze the characteristics and examples of earthquakes in Korea and Japan, and to propose improvements to the earthquake prevention policy in Korea. Method: In this study, we investigate and evaluate Japan's response in two cases: the Kobe earthquake and the East Japan earthquake. After surveying and evaluating the nation's countermeasures in the two events, Gyeongju and Pohang, they were compared. Result: When comparing recovery systems in Korea and Japan, there were significant differences in plans for restoration of road transport networks, regional disaster prevention plans, and the introduction of Conclusion: considering the physical distance between Korea's earthquake-prone areas and the capital, the government should quickly come up with countermeasures to ensure that immediate earthquake response in the region is enhanced through the detailed establishment of the Functional Continuity Plan (COOP), and that administrative functions will function normally in the event of a disaster through the introduction of the administrative BCP concept.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.558-576
• /
• 2020

Purpose: This study wanted to empirically study the effects of ISO 22301 and ISMS certification requirements on Business Performance. Method: For research, a survey was conducted on ISO 22301 and ISMS-certified companies to collect data and use SPASS18 and AMOS18 for statistical analysis. Results: Verification of the hypotheses through the questionnaire demonstrated that BCP, BCM operation, management, and access control of ISO 22301 and ISMS certification requirements, including BIA, risk assessment, BCP, BCM, BCM operation, management, and access security requirements, affect the enterprise's performance (quality improvement, customer satisfaction, financial performance) through the intermediation of the enterprise culture, and the feasibility of the survey paper is high. Conclution: This study has derived the impact of ISO 22301 and ISMS certification requirements on business performance, and based on this, it is deemed necessary to present improvements to ISO 22301 and ISMS certification, and to study future ISO 22301 certification activation and domestic certification, BCMS.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.339-346
• /
• 1993

Due to the natural increase of human population and the concentration of industrial complexes to coastal area, the uses of nearshore area were increased drastically, and the tendency will not stop for a while. Therefore, the loss of human life and property damages of the present days for a disaster of the same magnitude should be heavy as compared to those of the past. For the better utilization of the sea and the prevention of the frequent marine natural and man-made disaster, and for the preparedness for the ocean pollutions, through ocean researches are required. the circulation, tidal currents, storm surges, sea surface wind, waves and sea fogs of the Yellow Sea should be investigated first from the oceanographic point of view, and then the dispersion and diffusion of spilled oil and pollutants, beach erosion, red tide, and longterm sea level oscillations can be studied. International cooperation is crucial for the investigation of the sea because of the temporal and geographic scales of the oceanic phenomina.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.9-17
• /
• 2013

Government ministries operate various system dealing with filed civil appeals. There are representative systems such as Safety Monitoring System of the Ministry of Public Administration and Security (MOPAS), Disaster Premonitory Information System of the National Emergency Management Agency (NEMA), Facilities Hazard Information System of the Ministry of Land, Transportation and Maritime Affairs (MLTM), Environmantal Monitoring System of the Ministry of Environment (ME). The purpose managing these systems is to reduce casualties and to improve safety by preventing disasters and accidents in local communities. This study suggests the method to effectively operate a safety monitoring system which fits to local situations based on the statistical analysis performed on filed complaint cases in Gangdong-gu as a sample region. The cases has been collected since 2012 through the voluntary safety monitoring activity of a specialist who had finished the Emergency and Safety maneger's master course.