• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.35-41
• /
• 2017

Materials exposed to outside will deteriorate due to various weathering factors such as sunlight, heat, temperature, humidity and so on. Therefore, predicting speed of degradation and life time is a very important issue. This research uses retro-reflective sheets with white and green which are most commonly used colors to conduct the outdoor exposure test and acceleration test of xenon arc in Arizona state in the United States, Chennai in India, Sanary in France and Seosan in Korea to measure the reflective performance of retro-reflection. The accelerated factor was obtained by using regression analysis through reflective values obtained from the acceleration test of xenon arc from Seosan area. Also, by using solar uv program, the accelerated factor of various climate regions were obtained and it was confirmed that the accelerated factor of Senary was 1.04, Arizona 1.82, Chennai 1.92 times higher than that of Seosan.

• Proceedings of KHEA Conference
• /
• 2004.10a
• /
• pp.138-138
• /
• 2004

• Science of Emotion and Sensibility
• /
• v.16 no.4
• /
• pp.517-526
• /
• 2013

This paper reports on flexible plastic optical fiber (POF) fabric displays which are used to develop light-emitting clothing from photonic fabric. We first evaluated the luminescence value corresponding to different methods of processing flexible optical fibers, types of reflective fabric structure, and colors of the light. Moreover, we tried to identify the optimum conditions of the flexible POF fabric displays to realize high luminescence value. The processing methods that were compared were the "Pre-etching" method and the "Post-etching" method. On the basis of the reflective structure of the fabric, the fabrics were categorized as the "White fabric" and the "Reflective fabric." Analysis results showed that the effect of the processing method is more dominant than that of the types of reflective fabric structure. Further, the capability of the Post-etching method to increase luminescence value is slightly higher than that of the Pre-etching method. Further, the 'Reflective fabric' is slightly more efficacious as the base fabric to increase the luminescence value, than the White fabric is. Thus, optimum increase in luminance can be realized by employing the Post-etching method and the Reflective fabric as the base fabric.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.26-33
• /
• 1996

광원에 대하여 서로 다른 여러개의 각도방향에서 광원을 바라볼 때 관측되는 광도분포 및 재귀반사성능을 측정하기 위해 광도분포 측정장치(배광측정기)를 제작하였다. 이 장치는 광원을 좌우로 360도, 상하로 $\pm$30도 회전시킬 수 있는 광원회전장치, 광검출기로 광전자중배관(PM Tube)을 쓰는 수광부 및 재귀반사성능 측정용 투광기와 제어 및 표시부로 구성되어 있다. 광도 측정범위는 0.01-199900 cd , 관측각범위은 0.2-1.5도 이고 광도의 측정오차는 $\pm$3% 이다. 제작된 장치의 구조와 성능평가결과가 제시되었다.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.439-444
• /
• 2015

Several attempts to design the best-available thermosetting road markings by using MMA to improve the durability and retroreflectivity are presented in this paper. In order to improve field applicability, the components of main materials were designed by means of reducing the hardening time lower than eight minutes. The optimum mixing ratio of thermosetting road marking was TSRM-6 composed of 15.6 wt% of MMA monomer ($Tg=105^{\circ}C$), 6.0 wt% of PMMA (MW = 70,000, $Tg=60^{\circ}C$) and 1.2 wt% of TMPTA (MW = 338, $Tg=27^{\circ}C$). Also the homogeneous mixing of all components was necessary. The use of ceramic glass beads with an optimized TSRM-6 exhibited excellent performance by achieving retroreflectivity coefficients of 431, 354 and $172mcd{\cdot}m^{-2}{\cdot}lux^{-1}$ for dry, wet and rainy test condition, respectively at two hundred thousand cycles.

• Journal of the Korean Home Economics Association
• /
• v.44 no.2 s.216
• /
• pp.93-101
• /
• 2006

Children's wear needs extra safety features to avoid unexpected dangers. On the way to school, children are exposed to traffic very often. Especially in the early morning or late evening, or on dark cloudy days, they might be unrecognized by drivers without safety reflectors on their clothing as a means of raising visibility. Therefore, safety reflectors on clothing can protect children from traffic accidents. The research was carried out as follows. 1. Reflector manufacturers were interviewed regarding how Reflective and Reflexite reflect light back to the light source, what kind of safety reflector products are available, and how these materials are being used in the clothing industry. 2. Mothers of primary school children were interviewed to find out what they think about the effect of safety reflectors, the need for clothing using safety reflectors and the design preferences. 3. In order to apply safety reflectors efficiently, the position on the clothing of the greatest visibility from the light source must be determined. 4. Shirts, pants and jumpers for 8-year-old girls and boys were designed as a case study of applying safety reflectors to clothing. The designs were verified through wearing test.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.342-351
• /
• 1998

노면표시는 운전자에게 시선유도와 각종 규제 및 지시에 대한 정보를 제공함으로써 교통안전 및 소통에 도움을 주는 시설로써 주야간의 시인성 확보가 중요하며 이를 위해서는 반사화가 필요하다. 노면표시의 반사성능은 유리알 (Glass Bead)의 함량 및 종류, 용융온도, 도료의 색도등 각 영향인자에 의해 결정되지만 현재는 시공법 및 관련 연구의 미흡으로 현행기준의 최하수준을 상회하는 정도로 제공되고 있다. 따라서 본 연구에서는 노면표시의 시공에 관계되는 각 요인중 반사성능가 내구성에 영향을 미치는 주요인자 및 반사성능을 최적화하기 위한 인자별 최적조합을 도출하였다. 연구결과 유리알 살포량이 중량비로 25%-30%, 용융시 온도가 $188^{\circ}C$$\pm$$10^{\circ}C$일 때 노면표면시의 반사성능이 최적화됨을 밝혀내었다. 또한 유리알의 품질개선과 함께 황색 노면표시의 재귀반사 휘도계수 기준을 현재 기준보다 상향조정할 필요성이 있음을 제안하였다.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.131-140
• /
• 2012

Lane markings such as edgelines, centerlines, and lines that delineate lanes generally provide drivers with the various information for safe driving. Drivers can easily recognize the lane markings through the color differences between the markings and road surfaces during the daytime. However, it is a bit difficult for drivers to perceive them during the nighttime due to the lack of artificial lights. Although the glass beads with the 1.5-refractive index have been used to improve the visibility of the lane markings during the nighttime, it is still difficult for drivers to recognize the lane markings properly, especially during the rainy nighttime, which may often lead to traffic accidents. To improve the retroreflectivity and visibility of the lane markings during the rainy nighttime, the high refractive beads with the 2.4-refractive index are essentially required, but they do not work appropriately during the dry nighttime. Thus, the mixed materials with the 1.5, 1.9, and 2.4-refractive beads should be considered for the satisfactory implementation of the lane markings. This study reveals the best mixing rates of the beads by conducting benefit-cost analysis under various weather conditions in Korea. The analysis results show that the lane markings with the 100% of the 2.4-refractive beads provide the highest visibility of lane markings regardless of the roadway conditions, but the benefit-cost (B/C) ratio of the bead mixture is merely 0.46. The best mixing rate of the beads, from the highest B/C ratio viewpoint, was identified as the mixture with a 80% of 1.5-refractive beads and a 20% of 2.4-refractive beads. Some limitations and future research agenda have also been discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.37-48
• /
• 2020

Eight colors prescribed by the Enforcement Rules of the Road Traffic Act and the group standard were tested to secure the minimum recursive reflectance performance standards when drying and wetting. The results were calculated to be 260.8 (mcd/㎡·lux) when drying white and 154.6 (mcd/㎡·lux) when wet. Yellow was 67% compared to the white reflective performance when drying. Wet poetry was 79 % and 59 %, respectively. In the case of blue, it was 64% in the case of white versus 72% in the case of white. Wet poetry was 63 % and 72 %, respectively. The range of changes in reflective performance during wetting was higher than when drying, and the absence of glass grains was similar to the previous results. The new colors also have a standard value of more than 50% compared to the white color in red, orange, pink, light green, and green. Based on this, it was estimated that the minimum reflective performance criteria according to the color of the road markings would form the basis for the enforcement rules of the Road Traffic Act.