• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.573-576
• /
• 1999

본 논문은 다양한 분야에 적용이 가능한 고압 직류 전원장치를 개발에 관한 것이다. 개발된 이 장치는 soft switching 기술을 이용하여 인버터의 전력소자가 switching 때문에 발생하는 손실과 EMI를 감소시키기 위하여 영전압 스위칭(ZVS; Zero Voltage Switching) 방식을 채택하였다. 이러한 고주파 인버터의 구동방식을 단일 Chip 제어기로 쉽게 구현할 수 있는 영전압 스위칭 위상전이 제어 직렬 공진형(ZVS PSC-SRI; ZVS Phase Shifted Control Series Resonant Inverter)으로 선택하여 제어기의 신뢰도를 높였고 장치의 고효율화(90%이상) 확보와 장치의 소형화뿐만 아니라 실용화를 위한 저가격화를 절충할 수 있는 방법을 중점적으로 연구하였다. 본 논문에서 고주파 고압 직류 전원 장치의 구성 및 설계, ZVS PSC-SR 인버터의 설계 그리고 고주파 고압 변압기의 설계에 관한 내용을 자세히 설명하고 제작된 고주파 고압 전원장치의 실험결과 및 고찰을 기술한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.613-619
• /
• 2016

A pneumatic control valve performs a major role in controlling the flow of a system or the level of a key tank in many power plants, and its performance should be guaranteed during the plant's lifetime. Its operation starts by supplying air to the pneumatic actuator or by exhausting the air from the actuator. To control the valve position, the amount of air supply or exhaust is adjusted by a control loop where various accessaries are equipped. In this paper, air leakage in the air supply line, changes in the valve packing force, and false adjustments of zero and the span of the positioner are simulated and analyzed using a 2-in pneumatic valve with a position control loop including an I/P converter and positioner, where the valve position is controlled within ${\pm}2%$ of the control pressure at 67% opening position.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.245-251
• /
• 2015

In this paper, we present a design of PWM-controlled driving device for backlights in LED systems. The system can control either the brightness of the entire screen of backlights of LCD driven by LED or illumination or contrast of each partial segment of the entire screen. The PWM-controlled driving device includes the shift register that shifts the series data according to the clock signal prior to the generation of parallel data. It is also is comprised of a number of registers, a number of counters, a number of comparators, and a number of synchronizing gates (producing the PWM-controlled signals). The proposed device for backlights in LED systems can generate the PWM-controlled signal with a high degree of resolution without the increase of clock frequency. It also contains the PWM-controlled circuit that disperses and restrains the quantized noise.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.105-112
• /
• 2002

In this paper, a servo filter design for the gimbal engine actuator system of KSR-III(Korea Sounding Rocket-III) is considered. A reasonable filter structure is determined based on the actuator analytic models. The servo filter consists of a 2-nd order lowpass filter and a 1-st order compensator. The lowpass filter is required to protect the actuator from high frequency vibration, and the compensator to enhance the resulting stability. A Butterworth type servo filter is considered as the simplest one. The final servo filter type is determined by evaluating simultaneously both high frequency gain reduction performance and the corresponding KSR-III stability margin. Consequently it is revealed that a notch type servo filter located on the error between command signal and feedback signal in the control loop is very effective. Later, based on the proposed servo filter type, an onboard servo filter hardware of KSR-III will be designed and tested.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.9-13
• /
• 2022

Electric wheelchairs, the output from the motor is mainly applied to a speed reducer using a power transmission device such as a belt or a chain. However, although a speed reducer using a belt or chain is a simple device, it occupies a lot of space and has a space limitation, so it is not suitable for an electric wheelchair driving part. However, since the speed reducer of the planetary gear type is decelerated on the same axis, the volume can be reduced, so the space constraint is less than that of the belt or chain type reducer. Therefore, in this study, a driving part that can obtain great propulsion with a speed reducer using a planetary gear type was developed through a study on the driving part of a wheelchair that can be switched between manual and electric. Accordingly, the tooth shape of the planetary gear applied to the reducer was designed using the Kisssoft program. In addition, the drive part was designed to be applicable to the existing wheelchair wheels, and the mechanism was optimized for the manual/electric switching principle and operation principle of the drive part. Based on the research contents, the final design and manufacture of the wheelchair reducer drive unit in the form of a planetary gear having one sun gear, two planetary gears and one ring gear was carried out.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.792-797
• /
• 2010

Microwave oven and household cooker are devices of high voltage producer and high voltage storage batteries respectively for formation of necessary high frequencies at drive. These devices emit much heat energy because they are run at high voltages. Therefore, emitted heat energy becomes a factor that raises temperature of microwave ovens' main frame. In this research, the analysis shows the temperature distribution in microwave oven with the cooling fan drive conditions and the heat energy occurrence conditions. According to the analysis, as the speed of air outpoured in cooling fan increases, and the internal temperature decreases quantitatively. Also the inside temperature distribution was investigated by controlling heat energy emission.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.345-346
• /
• 2015

본 논문은 30kW, 95GHz 자이로트론을 구동하기 위한 50kV, 100kW 출력의 Cathode Power Supply(CPS) 설계에 대해 기술한다. 자이로트론 구동 시스템의 신뢰성과 효율성 향상을 위해 고효율 공진형 컨버터 토폴로지를 이용한 3개의 컨버터 모듈을 기반으로 출력단이 직렬로 구성된 모듈의 3상 운전을 통해 낮은 출력 전압 리플과 함께 아크 발생 시 부하 단으로 전달되는 에너지를 최소화 할 수 있도록 CPS를 설계한다. 또한 고전압 전원장치의 절연에 대한 신뢰성 확보와 전력밀도 향상을 위한 변압기 및 정류부의 효율적인 절연 설계 및 구현에 대하여 기술한다. 설계된 CPS의 실험결과를 통해 30kW, 95GHz 자이로 트론을 구동하기 위한 전원장치 설계의 타당성과 우수성을 검증한다.

• 전기의세계
• /
• v.24 no.6
• /
• pp.45-49
• /
• 1975

후막 HIC는 computer 회로뿐만 아니라, 자동차의 전압 조정기 고출력, 증폭단, 텔레비젼 CRT관의 전력 구동단등의 고출력 회로와, 텔레비젼 또는 산엽용 전자 장치의 VHF, UHF, 회로 구성에 많이 이용된다. 국내에서는 전자시계 제작에 수개 업체에서 HIC 기술을 이용하고 있다. 더 높은 주파수대인 마이크로-웨이브대 (파장이 cm대에서 mm대에 이른다)장치의 소형화는 박막 HIC에 의하여 실현되고 있다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.368-368
• /
• 1998