• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.512-512
• /
• 2012

최근 저온 대기압 플라즈마 장치의 개발로 대기 및 수질 환경, 바이오 메디컬분야로의 응용 연구가 활발히 진행되어 공기 중 플라즈마의 살균 및 정화효과에 대한 많은 결과가 발표되어 왔다. 본 연구는 면방전 구조의 DBD플라즈마 소스를 제작하여 He과 Ar 기체를 유입하여 미생물인 E.Coli의 변화를 관찰하였다. 면방전 구조의 DBD플라즈마 소스는 1.8 mm 두께의 유리기판위에 포토리소그라피 공정으로 미소전극을 형성하여 고밀도의 방전 셀을 형성하였으며 방전시 발생하는 열 효과를 제어하기 위하여 냉각장치를 제작하여 장착했다. 또한 유리기판과 포토 리소그라피 공정은 방전영역에 제한없이 다양한 크기의 소스제작이 가능하다. 셀 피치가 $400{\mu}m$이며 $cm^2$ 당 200여개의 방전 셀로 구성되어 있어서 기존 메쉬타입의 DBD플라즈마 장치에 비해 균일하게 플라즈마를 조사할 수 있으며 플라즈마 제트 장치에 비해서는 넓은 면적을 동시에 조사할 수 있게 되었다. Ar 과 He기체를 3 L/min의 유량으로 방전공간에 유입하면서 1kV의 구동전압으로 플라즈마를 발생 하였으며, 플라즈마의 조사시간을 20 s, 40 s, 60 s 간격으로 변화를 주어 E.Coli의 변화를 관찰하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.196.2-196.2
• /
• 2012

본 논문은 달착륙선의 개념설계를 위하여 고려한 전력시스템의 설계와 달착륙선의 지상시험모델용 추력기 밸브구동 전원장치 개발에 대해 기술하였다. 달착륙선의 임무특성을 고려하여 전력시스템의 구조를 검토하고, 극한의 온도환경에서 달착륙선의 임무수행을 위하여 필요한 전력에너지를 충분히 공급할 수 있도록 태양전지 배열기와 배터리의 용량, 그리고 전장품의 용량을 설계하였다. 특히 경량의 달착륙선 개발을 위하여 고효율의 태양전지를 이용한 태양전지 배열기와 리튬-이온 배터리를 검토하였다. 극한의 우주환경에서 태양전지배열기의 동작특성을 검토하고 생성될 수 있는 최대 전력을 분석하여 최적의 태양전지 배열기의 면적을 분석하고, 장시간의 월식을 고려하여 배터리의 방전특성에 따른 배터리의 전압특성을 검토하였다. 그리고 달착륙선의 전력시스템 개념설계의 타당성 검토를 위하여 유럽에서 개념설계 중인 달착륙선의 전력시스템 사양과 용량에 대해 비교검토를 수행하였다. 현재 개발중인 지상검증모델용 달착륙선의 전력시스템 설계와 추력기 밸브구동 전원장치의 개발에 관해 기술하였다. 지상검증용 전력시스템은 태양전지배열기의 장착 없이 배터리의 전력만을 사용하여 지상검증모델용 달착륙선의 부하에 전력을 공급할 수 있도록 설계되었다. 달착륙선 지상시험모델의 비행시간과 임무에 따른 부하특성을 고려하여 상용 리튬-이온 배터리의 용량을 선정하였으며, 부하의 전력을 고려하여 간단한 보호회로를 설계하였다. 그리고 지상검증용 전원시스템은 추력기의 밸브구동을 위한 추력기 밸브구동 전원장치, DC/DC 컨버터 전원 모듈, 모니터링 모듈, 그리고 위급상황에서 전원을 차단하기 위한 "Emergency STOP" 모듈로 구성되어 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.10-17
• /
• 2015

In this study, to examine seismic reinforcement effect of a school building constructed prior to application of seismic design, a Double I-type damper supported by wall was installed to perform comparative analysis on existing non-seismic designed RC frame. As a result of experiment, while non-seismic designed specimen showed rapid reduction in strength and brittle shear destruction as damages were focused on top and bottom of left and right columns, reinforced specimen showed hysteretic characteristics of a large ellipse with great energy absorption ability, exhibiting perfectly behavior with increased strength and stiffness from damper reinforcement. In addition, as a result of comparing stiffness reduction between the two specimens, specimen reinforced by shear wall type damper was effective in preventing stiffness reduction. Energy dissipation ability of specimen reinforced by Double I-type damper was about 3.5 times as high as energy dissipation ability of non-reinforced specimen. Such enhancement in energy dissipation ability is considered to be the result of improved strength and deformation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.331-337
• /
• 2018

Prosthetic rehabilitation of an edentulous patient who has a maxillary defect is difficult to achieve for many clinicians. The maxillary defect causes leakage of air during pronunciation and compromises denture stability, support and retention by reducing denture-bearing area and breaking peripheral seal. In these patients, the sizes and shapes of defects are very important factors which attribute to prognosis of maxillary obturators. This case report shows the prosthetic rehabilitation of the patient who had maxillectomy on the right maxillary sinus because of squamous cell carcinoma. The patient had a stepwise treatment protocol which started with pre-operative dental examination and followed by surgical, interim and definitive obturation phase. In this case, an acceptable level of retention could be obtained due to well-defined static defects and the preserved premaxillae and the patient was satisfied with the result of the treatment in the aspect of function and esthetics.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.535-540
• /
• 2015

Collimator has important functions with control primary X-ray that decrease radiation exposure dose for patients and reduce scatter ray and make better quality of image. But there are no regulations for X-ray mammography device of collimator, so widely used device adopt rectangularly controlled collimator. Though digital X-ray mammography device expand supply recently, rectangularly controlled collimator of film/screen mode still used. After searching for real condition of beam field with digital mammography, we made a multi-leaf collimator which is able to adjust the beam field in accordance with size and shape of breast, and we measuring up the transitions of image quality, average glandular dose(AGD) and, Dose area product(DAP). There are no significant differences between rectangularly controlled collimator and multi-leaf collimator, and DAP value decreased by 50.72%. As conclusion, there needs to expand the use of multi-leaf collimator for optimum adoption of beam field in digital mammography, and also need to develop an automatic regulation of beam field for reduce of exposure dose to patients.

• Current Research on Agriculture and Life Sciences
• /
• v.22
• /
• pp.19-27
• /
• 2004

Cultivation area of garlics is 9% of all cultivation area of vegetables. The amount of annual demand is increased in 1,000~1,500ton. Also, the amount of demand per person has a tendency to increase as above 10kg. So, garlics has become important crops in agriculture. The purpose of this study is to acquire the basic information to design the garlic seeder attached power tiller. We used Working Model 3D program to design an automatic aligning device which is the most important part of the garlic seeder. The results are as follows; 1. The optimum depth of garlics seeding was shown as 3cm. 2. The garlic seed has to he discharged from the garlic seeder at intervals of 0.75sec in order to seed at intervals of seeds of 15cm. 3. The optimum design factors of the automatic aligning device were shown as cylinder diameter of 4cm, cylinder gap of 1cm, revolution of 36rpm and inclined angle of cylinder of $8.4^{\circ}$.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2005

A multipurpose operating system was developed to adjust both spray times and ventilation method without a configuration of the moving path and the type of the greenhouse. The multipurpose working system proved to be a reliable system for testing the growth quality of the fruit vegetables in the greenhouse. The results are as follows. The first leaf, diameter of a stem, leaf area, and average stem diameter in the Cucumber seedling growth were repressed by high-speed ventilation, but was not repressed by spray times. The first leaf in the Tomato seedling growth was repressed as ventilation velocity was high, but the average stem diameter was not repressed. While the Tomato was given water three times a day, the diameter of a stem and the leaf area were increased as ventilation speed became higher. However, those were different other factors. The Tomato leaf area was larger when given water twice a day than that in hand spray, but showed no difference with ventilation speed. The first leaf, the diameter of a stem and the leaf area of a Red pepper were lower in automatic spraying with ventilation than those in hand spray.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.135-142
• /
• 2020

In the recent farming industry, there is a growing diffusion of drones, which are recognized as a crucial technology of the 4 th industrial revolution to cope with aging. Especially, filming and pest control using drones are representative fields that have different age groups for obtaining a national license of multicopter that is a ultra-light flying device, and can create profits after getting a license. However, pest control technology using drones has different spray effects depending on levels of operational proficiency, since this highly relies on an operator's operating skills. It is anticipated that if this issue is supplemented, the use of drones for pest control in the farming industry will diversify. For analysis of spraying characteristics of agricultural pest control drones, this study aims to formulate effective spraying hours and effective spraying intervals and suggest an algorithm, which facilitates an accurate calculation of pest control area depending on the kinds of pest control drones. This algorithm can be used in the field of pest control by improving scatterling issues caused by drone flight methods of drone pest controllers and building an optimum pest control manual in future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.645-651
• /
• 2015

The objective of this study is to experimentally investigate the effect of design parameter on the mass ratio of a central-driven ejector. The design parameters are the primary nozzle area and distance ratios, diffuser exit-area ratio and mixing-tube length ratio. The experimental setup was an open-loop continuous circulation system which has a movable nozzle ejector, an electric motor-pump, a water tank, a control panel and high-speed camera unit. We calculated the mass ratio using the measured primary and suction-flow rates with the experimental parameter of primary water-flow rate or pressure. The results showed that the mass ratio increased with the primary nozzle distance ratio and mixing tube length ratio, while the mass ratio decreased with the primary nozzle-area ratio and diffuser exit-area ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.209-209
• /
• 2020

환경부 자료에 따르면 1990년대부터 2000년대 후반까지 국내의 도시면적은 696,239㎢ 증가했다. 도시지역에서의 불투수면적이 차지하는 비율은 25% ~ 80%로 적지 않은 비율을 차지한다. 따라서 도시면적이 증가하면 이는 불투수면적의 증가로 이어지며 이로인한 지표유출로 오염물질의 유입이 늘어나게 되면, 수질오염중 비점오염원이 차지하는 비중의 증가한다. 비점오염원으로 인해 발생하는 환경문제를 해결하기 위해 LID(Low Impact Develpment)시설에 대한 연구가 많이 진행되었다. 본 연구에서는 7년간의 선행 연구결과를 바탕으로 LID 시설별 오염물질 저감효율을 비교분석하였다. 용인 삼계리에 위치한 식생수로 오염지표들의 유입, 유출EMC를 토대로 제거 효율에 대한 평가를 해보면 TSS는 46%, BOD는 48%, COD는 56%. TN은 42% 그리고 TP는 58%가 나왔다. 용인 해곡동에 위치한 식생여과대의 경우 TSS는 83%, BOD는 45%, COD는 43%, TN은 39%, 그리고 TP는 62%가 나왔다. 마지막으로 전주에 위치한 식생체류지의 경우 TSS는 100%, BOD는 75%, TOC는 62%, TN은 67% 그리고 TP는 83%가 나왔다. 이들 자료를 바탕으로 효율성 평가를 해보면 먼저 식생수로의 경우 TP 저감 효율이 58%로 가장 높았으며 TN 저감 효율이 42%로 가장 낮았다. 식생여과대의 경우 TSS 저감 효율이 83%로 가장 높았으며 TN 저감 효율이 39%로 가장 낮았다. 마지막으로 식생체류지의 경우 TSS 저감 효율이 100%에 가까운 양질의 제거효율을 보여주었으며, TOC의 경우 67%로 제일 낮은 제거효율을 보였다. 위 결과를 토대로 판단을 해보면 식생체류지가 전반적으로 좋은 지표를 보였으며 대부분의 상황에 양호한 제거효율을 기대할 수 있다고 생각된다. 식생 LID시설은 자연친화적이며 강우유출과 오염물질을 제거할 수 있다는 장점이 있는 반면, 장치형 LID시설에 비해 넓은 부지면적을 필요로 하므로 설치 지역의 특성에 맞게 LID 시설을 시공하는것이 적절하다고 판단된다. 해당 연구결과는 향후 식생형 LID시설을 설계하는데 있어서 기초자료로 반영될 것으로 기대된다.