• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.341-349
• /
• 2021

We studies to verify results similar to those of previous experiments, and their potential as a lighting device through optical characteristics experiments and resonance and optical characteristics simulations of array devices. The photonic quantum ring (PQR) device having a mesa diameter of 40 ㎛ and an internal hole diameter of 3 ㎛ was fabricated. Through the near-field observation of the fabricated device, it was found that the PQR device operates even at ㎂, and also that the mesa and hole devices are driven independently of each other. As a result of measuring the wavelength spectrum of the device according to the location, the coupling phenomenon due to mesa and holes was confirmed.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.119-124
• /
• 2007

Due to the deficit of section of web, the buckling strength of cellular beam become smaller than that of H-beam. In this thesis, we evaluate the buckling strength of web-post through non-linear F.E.M with opening distance-diameter ratio and opening diameter - web thickness ratio as essential variables. And also analyzes this comparing with the standard indicated in BS5950 Part 1.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.757-762
• /
• 1998

“하나로”를 이용하여 강내 조사용으로 사용되는 $^{192}$ Ir 선원의 제조법을 확립하였다. HTS (Hydraulic Transfer System)조사공에서 48시간 조사한 $\psi$2.5 mm x t 0.25 mm의 원판형 Ir 표적 10장을 쌓아서 방사능이 1.012 Ci인 선원을 시험제조하였다. 선원 제작에 관련된 생성방사능, 중성자 자기홉수효과 인자를 이론적으로 계산하여 시험제조에 사용하였고 ${\gamma}$선 자기흡수효과는 실험으로 측정하여 암 치료에 요구되는 10-20 Ci 선원의 상용생산에 필요한 자료를 확보하였다. 치료용 소선원 제작에 관련된 표적제작, 중성자조사, 방사능 측정, 선원조립, 밀봉용접, 품질관리 등의 제작기술을 확립하고 선원의 안전성은 밀봉시험, 표면오염검사 등을 수행하여 확인하였다. 제조된 선원은 실제 사용되는 조사장치에 장착하여 기능시험을 수행할 것이다. 이번 실험을 통하여 강내 조사용으로 사용되는 10-20 Ci 방사능의 $^{192}$ Ir 선원을 안정적으로 공급할 수 있음을 확인하였으며 하나로를 이용하여 캡슐 직경 4 mm의 치료용 소선원 제작기술을 확립하였다. 개발된 /spp 192/Ir 강내 조사용 선원은 국내 5-6개 병원에 공급할 것이며 이 기술을 바탕으로 직경 1.1-1.6 mm의 강내 조사용 선원도 개발할 예정이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.216.1-216.1
• /
• 2014

Closed drift ion source는 그 특성으로 인하여 강판 표면처리, 금속 표면 산화막 형성, 폴리머 혹은 기타 표면 개질 등 다양한 분야에서 사용이 되고 있다. 다양한 환경에서 사용 되는 소스의 특성으로 인하여 각기 다른 공정에 대한 최적의 특성이 요구 되며, 이러한 공정 환경에 맞춘 소스를 설계하기 위해서 ion source내 전극의 구조 및 자기장 세기 등 이온소스의 구조적 특성에 대한 연구가 필요하게 된다. 본 연구에서는 선형 이온소스의 구조 설계를 위한 실험을 소형(이온빔 인출 슬릿 직경: 60 mm) 이온빔 인출 장치를 제작하여 전극 구조에 따른 방전 특성을 우선적으로 평가를 실시하여 소형 이온빔 인출 장치에서 도출된 결과를 바탕으로 0.3 m급 linear closed drift ion source 설계에 대한 변수를 조사 하였다. 실험은 양극-음극(C-A) 간 간격 및 음극 슬릿(C-C) 간격 그리고 자기장 세기 조건에서 방전 전류 및 인출 이온빔 전류량 측정하였으며, 이 결과를 전산모사 결과와 비교 하였다. 방전전압 1~5 kV, 가스유량 10~50 sccm 조건에서 Ar 이온빔 방전 특성을 평가한 결과, 양극-음극(C-A) 간격이 넓을수록, 음극-음극(C-C) 간격이 좁을수록 방전 전류량이 증가함을 확인 하였다. 또한, 공정 가스 압력 및 자기장 세기 변화에 따른 1~5 kV의 방전 전압에 대한 방전 특성의 관찰 결과, 압력 및 자기장 변화에 따라서 방전 전류의 변화를 관찰 할 수 있었으며, 이에 대한 결과를 통하여 이온 소스 구조 내부에서의 방전 영역에 대한 압력과 자기장 세기에 대한 영향을 분석 할 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.502-509
• /
• 2003

After 800 students of Chonbuk National University was examined, 86 people (male : 43, female : 43, mean age : 22.2 years old) was selected as a group of normal occlusion. From their gypsum cast, this conclusion was obtained. 1. Intra-observer measurement errors in buccolingual diameter, maxillary lateral incisors have somewhat bigger errors. In mesiodistal diameter, maxillary first molars and maxillary second molar have bigger numerical value. Mean errors of measurement are 0.051mm at buccolingual diameter of crown and 0.083mm at mesiodistal diameter. 2. Fluctuating asymmetry is 0.030 average in buccolingual diameter, and 0.037 average in mesiodistal diameter. Statistically there are no big differences. 3. Male has longer buccolingual diameter than female in every permanent teeth. Teeth which have statistical difference in buccolingual diameter are maxillary lateral incisor, maxillary canine, maxillary second molar, mandibular central incisor, mandibular canine, mandibular second premolar, and mandibular first molar. In mesiodistal diameter maxillary central incisor, maxillary canine, and mandibular first molar have statistically difference. 4. Tooth which has the biggest difference depending on gender is maxillary lateral incisor in buccolingual diameter and mandibular canine in mesiodistal diameter. 5. Both sexes have similar crown index. Male has bigger value of crown module measurement and crown area measurement in every tooth. Crown area considered as size of tooth from occlusal surface was bigger in male than in female statistically except some teeth, maxillary first premolar, mandibular lateral incisor, first premolar and second premolar.

• Journal of the Korean Magnetics Society
• /
• v.26 no.2
• /
• pp.62-66
• /
• 2016

We designed a model composed a ring type magnet, a yoke, and a sensing coil buried in a projectile for calculating the muzzle velocity based on the voltage induced from sensing coil by simulation. The muzzle velocity was calculated from the master curve obtained through the voltage induced from sensing coil by simulation. The induced voltage increased with increasing the diameter of sensing coil. The projectile's velocity was proportional to the induced voltage when the sensing coil was buried in projectile. The projectile will be surely exploded at the target region by inputting the information of muzzle velocity variation corrected the diameter effect of induced voltage of sensing coil.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.32.5-33
• /
• 2009

카네기 천문대에서 주도하여 개발 중인 구경 25.4m GMT 망원경 사업에 한국도 공식적으로 참여하였다. 현재 한국천문연구원은 GMT(Giant Magellan Telescope)부경부를 국내에서 개발하고자 이와 관련된 연구를 진행하고 있다. GMT 부경은 직경 1.06m 오목거울 7장이 모여 전체 직경 3.2m인 타원면을 형성하고 초점비는 F/0.7이다. GMT 부경개발 선행 연구과제로 카네기 천문대에서 개발되어 현재 운용중인 구경 6.5m 마젤란 망원경의 부경을 선택하였는데, 이는 마젤란 부경의 형상과 직경, 부경시스템 운영방식이 GMT 와 유사하기 때문이다. 천체관측 망원경에서 거울면의 변형에 가장 큰 영향을 미치는 인자는 거울의 자중이다. 거울의 직경이 커지면 자중이 증가하게 되어 거울면의 처짐이 커지게 된다. 이를 극복하고자 다양한 거울 support들이 개발되었다. 그중에서 counterweight lever 시스템 같은 부양(float) 시스템은 자중의 영향을 보상해 줌으로써 그것에 의한 거울의 변형을 최소화하는 역할을 하는데, GMT 부경 개발에 근간이 되는 마젤란 부경 또한 부양 시스템을 도입하였다. 마젤란 부경의 부양시스템은 counterweight lever 시스템과 유사한 진공 시스템을 도입하였다. 마젤란 부경의 support는 axial 방향으로 거울을 지지하는 axial support와 lateral 방향으로 거울을 지지하는 lateral support가 있는데, 이중에서 axial support가 진공시스템으로 구성된다. Lateral 방향의 지지는 경량화된 거울의 hole 안에 3개의 판스프링을 삽입하여 단지 거울과 판스링의 강성에 의해서만 이루어진다. 이 논문에서는 망원경이 작동을 할때 즉, 천정각(zenith angle)이 변할 때 axial support와 lateral support의 조합(combination)에 의해 지지되는 마젤란 부경의 표면 정밀도 RMS 값을 비교하였다.

• Korean Journal of Crystallography
• /
• v.6 no.2
• /
• pp.141-157
• /
• 1995

Single crystals of TeO2 with large diameter were grown by Czochralski technique with auto-diameter control system. The ratio of crystal to crucible was 60-70%. The effect of critical pulling and rotation rate on the crystal quality was studied. Optimum growth parameters for high quality crystal pulling rate was less than 1.2 mm/hr. The solid-liquid interface was convex at the rotation rate of 10-23 rpm and concave at the rotation rate of more than 25 rpm, depending on the size of crystal and crucible. The platinum concentration in the melts is one of the main factors of the constitutional supercooling and thus the bubble entrapment in the growing crystal. Growth axis was confirmed to {110} direction during the whole growth procedure. Infrared spectrometric study and dislocation density measurment by chemical etching method on the grown crystal were performed. Finally, the reasons of cooperation of striations, inclusions, and optical inhomogeneities were discussed.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.1-4
• /
• 1970

The experimental studies were intended to clarify the effects of leaf yield calculations, and also aimed at estimating the correlations between some characters for the selection of desirable stocks of mulberry trees. The analysis of covariances was the variance components procedures in a replicated trial for the varieties, and also it was used to obtain the genotypic, phenotypic and environmental correlations between the eight characters-branch length, node number, branch diameter, branch number per stock, total branch weight, old branch weight, new shoot and leaf weight, and leaf weight, etc. The results obtained are summarized as follows: Phenotypic, genotypic and environmental covariances are shown in Table 1 and phenotypic correlations, genotypic correlations and environmental correlations are shown in Table 2. Genotypic correlations were slightly higher than the corresponding phenotypic correlations between the characters in the varieties, but the variation in values due to the change of environment appeared between the characters. Genotypic correlations between the leaf yield of mulberry trees and other characters indicated that high leaf yield was genetically correlated with six characters namely branch length, node number, branch number per stock, total branch weight, old branch weight and new shoot weight, etc. It was also observed that lower correlations were appeared between the leaf yield and branch diameter, and branch diameter and other all characters studied in both genotypic and phenotypic correlation coefficients.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.415-425
• /
• 2017

Stresses occur in the spent nuclear fuel disposal canister due to the impulsive forces incurred in the accidental drop and impact event from the transportation vehicle onto the ground during deposition in the repository. In this paper, the comparative study of finite element analysis for stresses occurring in various models of the spent nuclear fuel disposal canister due to these impulsive forces is presented as one of design processes for the structural integrity of the canister. The main content of the study is about the design of the structurally safe canister through this comparative study. The impulsive forces applied to the canister subjected to the accidental drop and impact event from the transportation vehicle onto the ground in the repository are obtained using the commercial rigid body dynamic analysis computer code, RecurDyn. Stresses and deformations occurring due to these impulsive forces are obtained using the commercial finite element analysis computer code, NISA. The study for the structurally safe canister is carried out thru comparing and reviewing these values. The study results show that stresses become larger as the wall encompassing the spent nuclear fuel bundles inside the canister becomes thicker or as the diameter of the canister becomes larger. However, the impulsive force applied to the canister also becomes larger as the canister diameter becomes larger. Nonetheless, the deformation value per unit impulsive force decreases as the canister diameter increases. Therefore, conclusively the canister is structurally safe as the diameter increases.