• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.13-16
• /
• 1970

The studies were intended to clarify the correlations between the characters and the influences upon yield of mulberry trees. The analysis of covariance was used to obtain the genotypic correlations and phenotypic correlations among the eight characters namely branch length, node number, branch diameter, branch number per stock, total branch weight, old branch weight, new shoot and leaf weight, etc., and path-coefficients were calculated by Dewey's method (5). The results obtained are summarized as follows： 1. Genotypic correlations were slightly higher than the corresponding phenotypic correlations between tile characters as shown in Table 1. It could be indicated that hight leaf yield was genetically correlated with almost all characters studied except branch diameter. 2. Leaf yield of mulberry trees was mainly associated with the characters such as node number per branch, total branch weight and old branch weight, etc. 3. Branch length, branch diameter, branch number per stock and new shoot weight had little direct influence upon yield but it had rather considerable indirect in fluence upon yield by increasing the node number and total branch weight per stock. As a result, it can be concluded that total branch weight is primarily determined by branch number per stock and old branch weight, and in turn the leaf yield of mulberry trees is secondary determined by the node number by increasing the branch diameter and length which are positively correlated with branch number per stock and new shoot weight of mulberry trees.

• Journal of Veterinary Clinics
• /
• v.29 no.5
• /
• pp.391-394
• /
• 2012

The purpose of the present study was to prove our empirical tendency of relatively high small intestinal diameter (SI) to fifth lumbar vertebral height (L5) ratio, which has been used in dogs. In this study, the ratio of SI/L5 was determined in small breed dogs weighing less than 5 kg. In addition, the effect of large volume of contrast media on the intestinal dilation was determined by performing upper gastrointestinal contrast study. Abdominal radiography and upper gastrointestinal series were performed in twelve healthy dogs weighing less than 5 kg. Small intestinal diameter (SI), fifth lumbar vertebral height (L5), and twelveth rib diameter were measured on abdominal radiographs. The range of values of SI/L5 is from 1.03 to 2.26 in plain radiography, and from 1.55 to 2.5 in contrast studies. Contrast agent significantly increased small intestinal diameter, and could be considered as mildly dilated intestinal model. Therefore, a value of 2.1 for SI/L5 is recommended as the upper limit of the normal range suggesting nonobstructive intestinal dilation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.243-248
• /
• 2022

The purpose of this paper is to etching SUS MASK by adding an additive (F300) to FeCl3. The equipment used in the experiment is a self-made automatic liquid management system. The automatic liquid management system is a device capable of controlling the Oxidation Reduction Potential (ORP) and specific gravity in real time and supplying FeCl3 and additives in a quantitative manner. SUS MASK was etched in units from 10 sheets up to 200 sheets for 1 minute. It was confirmed that when the initial SUS MASK was 10 sheets, the ORP value started with 628 mV and measured at 611 mV from the time of 40 sheets being injected, and maintained close to 610 mV up to 200 sheets. The specific gravity was maintained near 1.640. And the SUS MASK was measured close to 0.4 mm from 50 sheets to 200 sheets. The experimental conditions of ORP had a specific gravity of 610 mV, 1.463, an etching pressure of 3.0 kg/cm2, an additive (F300) ratio of 1.2%, and the hole size was measured by up to 200 sheets of 10 sheets at once etching. As a result, the diameter approached 0.4 mm from 20 sheets. Even if the number of SUS MASK was increased, the ORP and specific gravity were well controlled, and it was confirmed that the experimental target value was close to 0.4 mm.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.824-827
• /
• 2002

12inch 이상의 웨이퍼 성장에는 실리콘 용탕의 대류를 억제하여 웨이퍼의 순도를 높이기 위해 자기장 특히, 웨이퍼의 성장방향에 수직인 '수평자장'을 인가하는 방법이 사용된다. 현재 '자기장인가 방식', 특히 초전도를 사용한 자장인가 방식이 직경 1600mm에 이르는 용탕의 용액을 제어하는 유일한 방법으로 받아들여지고 있다. 본 논문에서는 12inch 실리콘 웨이퍼 성장용 초전도 마그네트 개발의 전단계로 개발중인 8inch 웨이퍼 성장용 수평자장형 초전도마그네트의 제작과정과 성능평가 결과에 대해 다루었다. 본 연구를 통해 액체헬륨의 증발을 최소화하기 위한 재응축형 극저온 용기에 대한 기술이 개발 되었으며, diode를 이용한 ��치보호부, HTS 전류리드의 ��치 protection부 등의 부속기술이 개발되었다. 초전도 마그네트는 내경 1400mm의 saddle type으로 이의 제작에 있어 많은 기술적 난재들을 경험해야 했다. 전체 시스템에 대한 성능평가 결과, 극저온용기 및 부속장치에 대한 결과는 만족스러웠으나, 코일부의 성능은 계획한 목표에 미치지 못했다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.99-102
• /
• 2009

LES(Large eddy simulation) of breakup and atomization of a liquid jet into cross turbulent flow was performed. Two phase flow between a gas phase and a liquid phase was modeled by a mixed numerical scheme of both Eulerian and Lagrangian methods for gas and liquid phases respectively. The first and second breakup of liquid column was observed. The penetration depth in cross flow was comparable with experimental data for several variant of a liquid-gas momentum flux ratio by varying liquid injection velocities. SMD(Sauter Mean Diameter) distribution downstream of jet was analyzed.

• Journal of ILASS-Korea
• /
• v.18 no.3
• /
• pp.126-131
• /
• 2013

This paper describes the effect of ultrasonic frequency(f) on the atomization and deformation characteristics of single water droplet in an acoustic levitation field. To achieve this, the ultrasonic levitator that can control sound pressure and velocity amplitude by changing frequency was installed, and visualization of single water droplet was conducted with high resolution ICCD and CCD camera. At the same time, atomization and deformation characteristics of single water droplet was studied in terms of normalized droplet diameter($d/d_0$), droplet diameter(d) variation and droplet volume(V) variation under different ultrasonic frequency(f) conditions. It was revealed that increase of ultrasonic frequency reduces the droplet diameter. Therefore, it is able to levitate with low sound pressure level. It also induces the wide oscillation range, large diameter and volume variation of water droplet. In conclusion, the increase of ultrasonic frequency(f) can enhance the atomization performance of single water droplet.

• Explosives and Blasting
• /
• v.23 no.1
• /
• pp.19-30
• /
• 2005

In this study, the standard particle velocity equations and the equation for calculating specific charge weight with application of rock fracture method using the finecker plus are suggested and the existing equation of fragmentation was transformed into one applicable to finecker plus. Standard rock fracture pattern was designed. Square root scaled equation is $V=345.39(D/\sqrt{W})^{-1.4484$. computable equation to specific charge wei인t is $W_f=(2.3\~2.5)\;f_agdV$, charge weight per hole is 0.54kg, and proportion of diameter 30cm fragmentation is about $48.7\%$. This rock fracture method nay him out to be more excellent than the other methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.123-123
• /
• 2011

알루미늄은 경량 금속으로 부식 저항력이 높아 철을 부식으로부터 보호하기 위한 표면처리 소재로 사용되고 있다. 철의 부식을 방지하기 위해서 알루미늄을 코팅하는 경우, 코팅 방법은 용융도금법이 주로 사용되고 있으며, 알루미늄을 빛의 반사막으로 활용하는 경우 진공 중에서 물리기상증착(physical vapor deposition; PVD)법을 사용하기도 한다. 알루미늄 박막을 물리기상 증착으로 코팅하면 박막성장 초기에 핵(nucleus)을 형성하고, 형성된 핵을 중심으로 주상정(column)으로 박막이 성장하는 것이 일반적이다. 알루미늄 박막의 주상정과 주상정 사이에 공극(pore)이 존재하기 때문에 알루미늄 박막을 부식방지 막으로 이용하기 위해서는 두께를 증가시켜야 한다. 본 연구에서는 스퍼터링(unbalanced magnetron sputtering)을 이용하여 치밀한 조직을 갖는 알루미늄 박막을 코팅할 수 있는 공정변수를 도출하고, 치밀한 알루미늄 조직이 철의 부식에 미치는 영향을 평가하였다. 기판은 냉연강판(cold rolled steel sheet)이 사용되었으며, 알루미늄 타겟의 크기는 직경 4 inch이었다. 알루미늄 박막의 미세조직과 밀도에 영향을 주는 공정변수를 확인하기 위해서 스퍼터링 파워, 공정 압력, 외부 자기장 세기 등의 조건을 변화시켜 코팅을 실시하였다. 알루미늄 박막의 밀도 변화에 가장 큰 영향을 준 공정변수는 외부 자기장의 세기와 방향이었다. 알루미늄 박막이 약 3 ${\mu}m$의 두께로 코팅된 냉연강판을 염수분무시험(salt spray test, 5% NaCl)으로 부식특성을 평가한 결과, 시험을 시작한 후 120시간 후에도 적청이 발생하지 않았다. 이러한 결과는 기존의 동일한 두께를 갖는 알루미늄이 코팅된 강판의 내부식 특성의 2배의 성능을 보여준다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.590-595
• /
• 1998

차세대 원자로(KNGR : Korea Next Generation Reactor)에는 새로운 안전개념으로서 피동형 안전주입탱크(Safety Injection Tank. SIT)의 도입을 고려하고 있는데, 이러한 피동형 유량조절기능은 안전주입탱크내의 유체기구(Fluidic device)인 볼텍스챔버(vortex chamber)에 의해 이루어진다. 볼텍스챔버는 내부에서 발생되는 와류강도에 따라 유동저항의 강도가 달라짐을 이용하여 유량을 피동적으로 조절할 수 있는 유체기구이다. 본 연구에서는 볼텍스챔버의 유동특성을 관찰하기 위하여 소규모 실험장치를 구축하고, 이를 이용하여 실험을 수행하였다. 본 연구는 두 단계로 수행되었다. 제1단계 실험에서는 볼텍스챔버의 기하학적 특성이 안전주입탱크의 안전주입수 방출특성에 미치는 영향에 대한 거시적 관점에서의 연구로서. 볼텍스챔버의 기하학적 변수(유입구 및 방출구의 직경)가 안전주입수의 방출과정에서 발생되는 SIT 내의수위 거동, 안전주입수의 방출유량 특성등에 미치는 영향에 대해 중점적으로 고찰하였다 제2단계 실험에서는 1단계 실험에서 관찰된 안전주입탱크의 여러 가지 방출특성과 볼텍스챔버 내부 유동장의 유동특성과의 관련성을 규명하기 위해 PIV (Particle Image Velocimetry)를 이용하여 볼텍스챔버의 기하학적 변수에 따른 유동장 내부의 국소 유속분포를 측정하였다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.105-108
• /
• 2004

Array of magnetic Ni nanostructures has been fabricated on Si substrate by using nanoporous alumina film as a mask during deposition. The nanostructures are truncated cone-shape and the lateral sizes are comparable to height. While the continuous film shows well-defined in-plane magnetization, the nanostructure shows perpendicular component of magnetization at remanence. The hysterectic behavior of nanostructures is dominated by the demagnetizing field instead of interaction among them.