• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2015

This research is the first research on developing the speed limit select model and also it is the result of the research on the importance of each element and consideration factors when selecting the speed limit. For the consideration factor discrimination and calculation of the importance, the delphi method and AHP method was used. The delphi survey was processed through third round survey, 5 high consideration factor(Level 1) and 23 low consideration factor(Level 2) was discriminated. During the process of the third delphi survey, when the CVR cost was in the range between 0.4~1.0 it was treated as the consideration factor when selecting the speed limit and less than 0.4 cost was eliminated. In the process of the second delphi survey, 33 consideration factors were discriminated but was reordered into 23 categories through the third survey. Based on the 23 categories earned through the third delphi analysis, the AHP survey was processed. The result of the AHP survey was that out of the importance of the 5 high consideration factor(Level 1), the traffic condition was evaluated as the number one factor and the vessel condition, waterway condition, environment condition, supporting condition and etc. conditions were evaluated following the traffic condition. Out of the 23 low consideration factor(Level 2) consideration, the visibility was evaluated to be the first important and the performance of the vessel steering, objective factors within the harbor, amount of traffic and density, distance between the passing vessel, speed of the steering capacity and tidal current were the following evaluated factors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.32-39
• /
• 2006

5.8GHz DSRC(Dedicated Short Range Communications) is a short to medium range communications service that supports both public safety and private operations in roadside to vehicle and vehicle communication. However the 5.8GHz frequency may cause the shadowing effect or communication blocking problem when there is an obstacle or another vehicle between RSE (Road Side Equipment) and OBE (On Board Equipment). In this paper, to solve this problem of the 5.8GHz DSRC, we propose a relay protocol based on the standard of DSRC radio communication between RSE and OBE in the 5.8GHz band made by TTA (Telecommunication Technology Association). By using the proposed relay protocol to DSRC system and intervehicle communication, we also consider a fixed relay protocol and mobile relay protocol. We expect to apply this relay protocol for the DSRC intervehicle communication and video communication between drivers and safe distance among vehicles in the near future.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.419-426
• /
• 2002

The conventional RTK-GPS technique has many problems which are permission using RF wireless modem, influence of geographic obstacle using radio wave, frequency interference, finiteness of frequency resources. To solve these problems, in this paper, we designed the DGPS correction message transmission system as a method to substitute the RF wireless modem of RTK-DGPS receiver. Then the interface module was designed and implemented for linkage of GPS receiver and mobile phone. As a result worked differential surveying using receiving correction message using RS-232C and communication control, users of mobile station were worked differential surveying correction between mobile phones. Interface module system was received the same result of precision which was compared RF wireless modem system.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.183-190
• /
• 2016

This paper proposes algorithm to reduce the computing time in a neural network that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. Object Detection can be defined as follows : Given image sequence, which can forom a digitalized image, the goal of object detection is to determine whether or not there is any object in the image, and if present, returns its location, direction, size, and so on. But object in an given image is considerably difficult because location, size, light conditions, obstacle and so on change the overall appearance of objects, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact object detection which overcomes some restrictions by using neural network. Proposed system can be object detection irrelevant to obstacle, background and pose rapidly. And neural network calculation time is decreased by reducing input vector size of neural network. Principle Component Analysis can reduce the dimension of data. In the video input in real time from a CCTV was experimented and in case of color segment, the result shows different success rate depending on camera settings. Experimental results show proposed method attains 30% higher recognition performance than the conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.30-30
• /
• 2015

유역에 내린 강우의 총량은 홍수나 갈수 측면에서 매우 중요하다. 점 강우량에 의해 측정된 강우량을 이용하여 유역 총강우량으로 환산하는 과정에 많은 오차가 포함되어 있다. 선행연구에 따르면, 우량계를 통한 강우관측에서 언더캐치(undercatch)에 의한 계통오차는 일반적으로 5~16%, 우연오차는 약 5%가 발생된다고 보고하였으며, 점 우량계 자료를 내삽하여 공간자료로 변환할 경우 0.1km 규모에서 표준오차가 4~14%, 1km 규모에서는 33~45%, 10km 규모에서는 약 65% 정도 발생된다고 한다. 이러한 우량계 관측오차 및 강우자료 처리과정에서 발생되는 오차는 유역의 유출량 계산에 영향을 주어 홍수예보 정확도를 크게 떨어뜨릴 수 있다. 우리나라에서는 지금까지 유역 총강우량 산정 측면에서 지점강우량의 불확실성에 대한 연구가 많이 이루어지지 못하였다. 본 연구에서는 우리나라에서 주로 사용되고 있는 전도형 우량계를 이용하여 소규모 구역에서 관측되는 강우관측의 불확실성을 분석하고자 하였다. 연구에 사용된 우량계는 0.5mm 급 표준 전도형 우량계로 정밀도는 시간당 1~100mm 기준으로 ${\pm}1%$를 기록하여 기상검정규격인 ${\pm}3%$를 만족하고 있다. 이 우량계는 한국건설기술연구원 안동하천실험센터 내에 장애물이 없는 평지에 60m 간격으로 총 6대($2{\times}3$)를 설치하여 2014년 7월 11일부터 9월 2일까지 54일간 관측을 수행하였다. 관측기간 동안 2대의 우량계가 수일동안 강우가 기록되지 않아서 분석에서 제외하였다. 우량계 상호 간의 누적강우량(54일간)을 비교한 결과 2.5~25.5mm의 차이를 나타냈다. 강우강도별 강우량 합계를 비교한 결과 시간당 1mm 이상에서는 약 1%의 차이가 났으며, 시간당 15mm 이상에서는 7.4%의 차이를 나타내어 강도가 큰 강우사상에서 우량계 간의 관측오차가 더 크게 나타났다. 또한 우량계 상호 간의 상관계수를 분석한 결과, 우량계 간의 거리가 가까울수록 그리고 누적시간이 길수록 상관계수는 커지는 것을 확인할 수 있었다. 도출된 결과를 토대로 하면 앞서 언급한 바와 같이 점 우량계 자료를 내삽하거나 유역 또는 계산격자의 대푯값으로 사용하여 1시간 이하 단위로 유출모의를 할 경우 심각한 오차를 발생시킬 수 있음을 시사한다. 보다 신뢰성 있는 홍수예보와 효율적인 유역관리를 위해서는 점 중심의 강우 관측이 아닌 면적 우량에 대한 관측이 이루어져야 하며 이를 위한 기술의 개발이 필요하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.224-229
• /
• 2018

Korea is experiencing a rapid increase in electricity consumption due to rapid economic development, and many power transmission towers are installed to provide smooth power supply. The high-voltage transmission line is mainly made of aluminum stranded wire, and the wire is loosely guided so that some deflection is maintained. The degree of deflection has a great influence on the quality of the construction and the life of the cable. As the time passes, the shrinkage and expansion occur repeatedly due to the weight of the cable and the surrounding environment. Therefore, periodic monitoring is essential for the management of the power transmission line. In this study, the power transmission lines were monitored using 3D laser scanning technology. The data of the power transmission line of the study area was acquired and the point cloud type 3D geospatial information of the transmission line was extracted through data processing. The length of the transmission line and deflection amount were calculated using the 3D geospatial information of the transmission line, and the distance from the surrounding obstacles could be calculated effectively. The result of study shows the utilization of 3D laser scanning technology for transmission line management. Future research will contribute to the efficiency of transmission line management if a transmission line monitoring system using 3D laser scanning technology is developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.538-549
• /
• 2019

This study suggests a new platform in which VI can communicate with their guardians who serve as a system administrator optimizing personal characteristics. In terms of interaction between platform components, this study can contribute to enhancing stability of walking by giving substantial information to VI through server processing and setups of guardians with real-time interaction to VI through server processing and setups of guardians with real-time interaction. Therefore, developing smart phone applications can facilitate both portability and cost effectiveness, by the users' downloading the application and registration. In terms of guardians' cost, this system is cost-effective because they can access to the administration system through personal computers or smart phones, not through specialized system devices. This system is web-based, which automatically communicates with the surroundings of, such as provides the guardians with the necessary information or approaches to the danger through IoT devices, which results in enhancing safety. Moreover, it is possible for guardians to utilize the personalized platform since the system not only senses personal characteristics but also sends a number of information to VI. a new platform makes it possible for guardians to provide electronic support and interaction with the application with the application users, which contributes to systematic and safe walk for VI.

• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.26-38
• /
• 2023

This paper is a study on a transport robot capable of autonomously driving to a destination using a QR code in an indoor environment. The transport robot was designed and manufactured by attaching a lidar sensor so that the robot can maintain a certain distance during movement by detecting the distance between the camera for recognizing the QR code and the left and right walls. For the location information of the delivery robot, the QR code image was enlarged with Lanczos resampling interpolation, then binarized with Otsu Algorithm, and detection and analysis were performed using the Zbar library. The QR code recognition experiment was performed while changing the size of the QR code and the traveling speed of the transport robot while the camera position of the transport robot and the height of the QR code were fixed at 192cm. When the QR code size was 9cm × 9cm The recognition rate was 99.7% and almost 100% when the traveling speed of the transport robot was less than about 0.5m/s. Based on the QR code recognition rate, an experiment was conducted on the case where the destination is only going straight and the destination is going straight and turning in the absence of obstacles for autonomous driving to the destination. When the destination was only going straight, it was possible to reach the destination quickly because there was little need for position correction. However, when the destination included a turn, the time to arrive at the destination was relatively delayed due to the need for position correction. As a result of the experiment, it was found that the delivery robot arrived at the destination relatively accurately, although a slight positional error occurred while driving, and the applicability of the QR code-based destination self-driving delivery robot was confirmed.