• Journal of the Korean GEO-environmental Society
• /
• v.17 no.1
• /
• pp.49-54
• /
• 2016

An active layer distributed on surface of an extreme cold region causes a frost heave by repeating the freezing and thawing according to the seasonal temperature change. Since the height of frost heave is greatly affected by the thickness of active layer, an accurate evaluation of the thickness of active layer is necessary for the safe design and construction of the infrastructure in the extreme cold region. In this study, dynamic cone penetrometer, which is miniaturized in-situ penetration device, is applied for the evaluation of active layer depth distribution. As the application tests, two dynamic cone penetration tests were conducted on the study sites located in Solomon and Alaska. In addition, ground temperature variations were obtained. As the results of the application tests, the depth of interface between the active layer and the permafrost was evaluated from the difference in dynamic cone penetration indexes of the active layer and the permafrost, and a layer was detected around the interface considered as an ice lens layer. Also, the interface depths between the above zero and the below zero temperature determined from the ground temperature variations correspond with the interface depths evaluated from the dynamic cone penetration tests. This study demonstrates that the dynamic cone penetrometer may be a useful tool for the evaluation of the active layer in the extreme cold region.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.431-438
• /
• 2004

Medical ultrasonic imaging is a useful imaging facility known to be most safe and easy. It enables physicians to observe the inside structures of the bodies, blood flow, and motions of internal organs. Some physical properties of biologic tissues can also be estimated from backscattered sounds. However, the ultrasonic pulses interrogating the living organisms leave their footprints in the returning signals during imaging. Some significant details are buried in the footprints and their overlaps from adjacent particles. These distortions also decrease the quality of the images. Many research efforts have been made to enhance the image quality and to recover the acoustic information in various ways. In this study, a new interrogation method based on the wavelet and subband filter bank is proposed. It adopts the subband wavelet filters satisfying the perfect-reconstruction (PR) conditions as the interrogating pulses to restore the details useful in tissue characterization and to enhance the image quality. The proposed method was applied to two types of simulations of ultrasonic imaging. The results showed its ability to restore the detailsin the simulated interrogation of biologic tissues, and verified the improved image quality in the simulated imaging of general ultrasonic phantom compared with the conventional method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.106-112
• /
• 2010

Due to the improvement and stabilization of the social environment, construction market in the urban region is under shrinking. According, researches to lengthen the service life of the existing building structures are under the way through the remodeling or maintenance of deteriorated structures other than the new constructions. Similar situations are widely discussed in the domestic building construction market and the social importance of the remodeling of the existing building structures is increased. Although the structural stability of the building is uncertain due to the frequent repairing and structural changing, the remodeling works are usually conducted. In general, documents such as drawings and calculations for the design of the deteriorated structure to be remodeled are not kept. Accident at the remodeling site frequently occur because of the lack of thorough understanding of changed situations such as loadings, loading paths, changing of the mechanical properties of material, etc. In this paper, using the finite element analysis method, we investigated the structural behaviors of slab in the remodeling building and the results are applied to remodeling construction, and the appropriateness of the remodeling works are evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.901-908
• /
• 2011

For the available grid environmental realization, the resource supply PC must have to provide an appropriate security function of their operation environments. SKY@HOME is a kind of the grid computing environments. If this has not supervised by administrator handling smoothly, it is inherently vulnerable state to the security level of the grid environments, because the resource supply PC is not update a security function without delay. It is also have the troublesome problems which have to install of an additional security program for support the appropriate security. This paper proposes an integration security model on the policy-based that provides an update each level according to the situation of the resource supply PC for improving its problems as a security aspect of the SKY@HOME. This model analyzes the security state of the resource supply PC respectively, and then the result is available to provide an appropriate security of the resource supply PC using an integration security model. The proposed model is not need additionally to buy and install the software, because it is provided the security management server oriented service. It is also able to set up the suit security function of a characteristic of the each resource supply PC. As a result, this paper clearly show the participation of resource supply PC improved about 20%.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.415-417
• /
• 2003

본 논문에서는 휴대폰에서 실시간으로 사용할 수 있는 GIS 기반의 약도를 생성하는 기법을 소개한다. 휴대폰의 출력 창은 크기가 제한되어, 자세한 도로 정보들이나 건물 정보 등의 GIS 정보를 모두 출력 창에 표현하면 사용자들이 인식하기가 매우 어렵다. 그러므로, 출력창의 크기에 맞춘 간략한 약도를 제공하여 사용자들이 지리 정보를 손쉽게 활용할 수 있도록 도와주자는 것이다. 기존의 GPS와 지리 정보를 이용한 경로 탐색 및 안내 장비는 차량 운전자를 위한 도로 중심의 지리 정보를 제공한다. 우리나라 도로 환경에서는 휴대폰을 가진 보행자가 장소 찾기에 필요한 지리 정보를 원하는 경우도 않다. 그러므로 본 연구에서는 도보 통행자 및 대중교통 사용자들이 이용하기 편리하도록 지하철역이나 버스 정류장, 대형건물과 같은 이정표를 중심으로 하고. 장소 찾기에 필요한 도로만을 출력 창에 나타내어 단순화된 지리정보를 제공하고자 한다. 또한, 기존에 사용하던 방위 개념 중심의 지도들을 가지고, 지도 읽기에 익숙하지 않은 일반 보행자들이 길 찾기에 바로 사용하는 것은 쉽지 않다. 그러므로 수직 개념을 이용한 단순화된 도로 표현 기법을 사용하여 일반인도 쉴게 지도를 보고 길을 찾을 수 있도록 하였다. GIS 정보 중에서 필요로 하는 도로들을 선택하여 그 경로들을 수직선과 수평선에 가깝게 변형하고, 불필요한 도로를 생략, 지도를 단순화하였다. 또한 포함되어 있던 많은 정보들 중에서 일반적으로 보행자들이 길을 찾아갈 때에 참고하는 정보들을 제외한 나머지 정보들을 생략함으로써, 불필요한 정보로 인한 지도의 복잡도를 줄이고, 지리 정보의 가독성을 향상시켰다. 본 연구의 결과를 활용하면 휴대폰의 출력 창에는 이정표 중심의 약도를 표현할 수 있으므로, 약도 정보를 실시간으로 서비스할 수 있을 것으로 기대된다.성뿐만 아니라 보안성을 중요하게 생각하였으며, 앞으로 보안 관련 소프트웨어 개발에 사용될 수 있는 도구들이 가이드 라인에 대한 정보를 제공한다.용할 수 있는지 세부 설계를 제시한다.다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)과 매우 밀접한 관련이 있는 것으로 사료(思料)되었고 초생아사망(初生兒死

• Smart Media Journal
• /
• v.5 no.2
• /
• pp.33-41
• /
• 2016

FPS Games are usually centered on a combat game play where the player plays through a first-person perspective as the in-game character, in order to strike the opponent in accordance with each level's objective. In such type of game play, the decision making that leads the player to take certain actions is carried out based on the player's visual cognitive information, and information collected both directly/indirectly via previous game play experiences. Particularly in the case of a FPS game where the mutual interaction between the player and each game level is the key, an analysis of a FPS game player's visual cognitive information can provide intelligence which can help design or adjust structures of a game level. For this thesis, a sample group has been collected and divided into a novice group and an expert group based on their level of experience with FPS games. Then, using eye-tracking equipments, the point of gaze of players in each group were recorded whilst they were playing levels of a well-known FPS title. The point of gaze in the moment the player starts to take actions -right before/after the start of a combat- was recorded in 500 play videos, and as a result each group's intrinsic pattern of gaze could be identified. Through these results, the author plans to develop a methodology that can enhance the difficulty setting and the playability of FPS game levels.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.623-629
• /
• 2018

Smart Factory is a concept of automatic production system of machines by the fusion of ICT and manufacturing. As a base technology for realizing such a smart factory, there is an increasing interest in a low-power environmentally friendly LED lighting system, and researches on so-called optical ID related application technologies such as communication using a LED and position recognition are actively underway. In this paper, We have proposed a system that can reliably identify logistics location and additional information without being affected by electromagnetic interference such as high voltage, high current, and generator in the plant. Through the basic experiment, we confirmed the applicability of the color ID recognition rate from 98.8% to 93.8% according to the eight color variations in the short distance.

• International Journal of Highway Engineering
• /
• v.4 no.4 s.14
• /
• pp.41-52
• /
• 2002

This study dealt with analysis of size effect of testing apparatus for Kim test which measures rut resistance characteristics of asphalt mixture under static loading. Two columns in different diameter with each column having different radios of round cut (Curvature) at the bottom were used for testing asphalt mixture. Deformation load ($P_{max}$) and deformation strength ($K_D$) were found to have relatively high correlation with rut depth and dynamic stability of asphalt concrete. Diameter of specimen was not a significant factor in this test. From the statistical correlation analysis with rutting properties, the radius of curvature and diameter of loading column were found to be important factor affecting the results of the test. Among the radios (r) of curvatures, r=0.5cm and 1.0cm showed much higher correlation than the column without curvature, and r=1.0cm being better between the two. The column with diameter of 4cm showed better correlation than diameter of 3cm. Therefore, the column of 4cm diameter with r=1.0cm was found to be the best among various apparatus sizes. Prediction models for rut depth and dynamic stability were developed for each aggregate mixture based on Kim test variables using SAS STEPWISE procedure. Therefore, if this test method is validated through further study, Kim test can be used for selecting asphalt mixture with the highest resistance against permanent deformation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.57-62
• /
• 2009

Purpose: TiN films were deposited on sus304 by unbalanced magnetron sputtering system which was designed and developed as unbalancing the strength of the magnets in the magnetron electrode. The color and hardness of deposited TiN films was investigated. Methods: The cross sections of deposited films on silicon wafer were observed by SEM to measure the thickness of the films, the components of the surface of the films were identified by XPS, the components of the inner parts of the films were observed by XPS depth profiling. XPS high resolution scans and curve fittings of deposited films were performed for quantitative chemical analysis, Vickers micro hardness measurements of deposited films were performed with a nano indenter equipment. Results: The colors of deposited films gradually changed from light gold to dark gold, light violet, and indigo color with increasing of the thickness. It could be seen that the color change come from the composite change of three compound,$TiO_{x}N_{y}$, $TiO_2$, TiN. Especially, the composite change of$TiO_{x}N_{y}$ compound was thought to affect the color change with respect to thickness. Conclusions: Deposited films had lower than the value of general TiN film in Vickers hardness, which was caused by mixing three TiN, $TiO_2$,$TiO_{x}N_{y}$ compound in the deposited films. The increasing and decreasing of micro hardness with respect to thickness was thought to have something to do with the composite of TiN in the films.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.89-94
• /
• 2008

Purpose: To observe the high temperature creep test and the fracture surface of the samples of 9% Ni alloy steel generally used for all kinds of mahine parts and predict the durability of that by determining a constant of C with a Larson-Miller variable. Methods: The equipment of this test was made into lever-beam style designed by Andrade and F. Garofalo et al.. The condition of creep test was set under 16 kinds of conditions after fixing 4 kinds of temperature condition and 4 kinds of stress condition to check how it effects the samples. Results: The temperature of creep test was increased, the stress index (n) of creep deformation was gradually decreased from 3.97 to 3.55. The activation energy of creep deformation was decreased from 90.39 to 83.64 kcal/mol when the stress was increased. A constant of C value by calculation of larson-Miller variable was about 22 and if temperature for use is suggested, the durability could be calculated. Conclusions: By analyzing the fracture phenomenon and suggesting the observation result of the fracture surface of the samples and creep test of 9% Ni alloy steel, the basic design data for the practical use of accessories in the field of equipment could be constructed and used to predict the durability of the equipment.