• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.24-30
• /
• 2022

Distributed fiber-optic acoustic·vibration sensing technology is becoming increasingly popular in many industrial and academic areas such as in securing large edifices, exploring underground seismic activity, monitoring oil well/reservoir, etc. Long-range perimeter intrusion detection exemplifies an application that not only detects intrusion, but also pinpoints where it happens and recognizes kinds of threats made along the perimeter where a single fiber cable was installed. In this study, we developed a distributed fiber-optic sensing device that measures a distributed acoustic·vibration signature (pattern) for intrusion detection. In addition, we demontrate the proposed deep learning algorithm and how it classifies various intrusion events. We evaluated the sensing device and deep learning algorithm in a practical testbed setup. The evaluation results confirm that the developed system is a promising intrusion detection system for long-distance and seamless recognition requirements.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2020

Social infrastructure facilities that have been under construction since the country's high-growth period are undergoing rapid aging, and, thus, safety assessments of large structures such as bridge tunnels, which can be directly linked to large-scale casualties in the event of an accident, are necessary. It is difficult to construct economical and efficient wireless smart sensor networks that improve structural health monitoring (SHM) because the existing wire sensors have a short signal reach. However, low-power wide-area networks (LPWANs) are becoming popular within the Internet of Things, and enable economical and efficient SHM. In this study, the technology trends of a wireless measuring sensor based on LoRa LPWANs were investigated, and an installation and maintenance plan for this type of sensor is proposed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.45-45
• /
• 2022

산업화에 따른 화학물질 사용량의 증가는 담수로의 유해화학물질 유출사고의 위험을 증가시키며, 이러한 사고는 하천수 수질과 수환경 생태계에 심각한 위해와 손상을 야기한다. 이러한 수질사고 발생시 신속 대응을 위해, 하천에 유입된 물질의 거동을 신속하게 예측하는 것이 필요하며 이 경우 1차원 추적모형이 주로 사용된다. 1차원 물질혼합 모형은 하천을 하나의 유선으로 보며, 복잡한 하천흐름의 시스템을 현상학적으로 해석하고, 오염물질의 이송 및 혼합 메카니즘을 모델 매개변수에 반영하여 모형화한다. 이러한 매개변수들은 직접적으로 측정하기 어려우며, 이론에 기반한 매개변수 산정 기법이 구축되지 않은 실정이다. 따라서 대부분의 연구에서는 추적자 실험을 실시하여 유한한 하천구간에서 추적자의 시간-농도곡선(Breakthrough curve, BTC)을 취득하고, 이를 통하여 대상 구간의 매개변수를 역산하는 최적화 기법에 의존하고 있다. 하지만, 모든 하천구간에 대하여 추적자 실험을 수행하여 데이터를 확보하는 것이 어렵기 때문에 최적화 기법의 적용성에 한계가 있다. 본 연구는 흐름정보가 제공되지 않은 미계측 하천구간에서 BTC를 신속하게 예측할 수 있는 회귀모형을 구축하는 것을 목표로 한다. 국내 하천에서 수행한 4회의 추적자 실험으로부터 취득한 28개 구간 케이스의 데이터에 대하여 농도곡선 전처리를 수행하고 14개의 통계적 특징을 추출하였으며, 계측된 흐름특성과의 상관관계를 분석하였다. 분석 결과, 대상 구간에서의 BTC의 변화가 추적자의 유하거리에 매우 높은 상관관계를 보였으며, 이를 이용하여 회귀모형을 제시하였다. 제안된 회귀모형을 적용하여 하류의 지점에서의 BTC를 예측하였으며, 1차원 이송-분산 방정식과 하천저장대모형을 활용한 예측결과와 비교하여 검증하였다. 그 결과, BTC의 변화특성을 활용한 회귀적 예측이 하천 지형 및 흐름의 변동성이 작은 구간에서 1차원 혼합모형들을 이용한 예측보다 더 높은 정확도를 보였으며, 이러한 장점은 장거리 예측에서 더 분명하게 나타났다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.343-349
• /
• 2005

In this research, the fiber Bragg grating sensors with long gauge for displacement measurement in the long distance is developed and tested. The sensors show an accuracy and a capability for displacement measurement oin long distance. Monitoring using static logger of system of FBG sensor with strained optical fiber shows the capability of measurement in the harsh environment such as strong wind. Measurement of long distance displacement by optical fiber sensor if use $250{\mu}m$ optical fiber and impose some strong pre-tension shows possibility in monitoring of nuclear containment structure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.13-22
• /
• 1987

The position fixing is the first essential in any offshore activity. At sea, position is almost always related to fixed points on land. The traditional method of the position fixing of a vessel is by double horizontal sextant angles observed between three fixed stations, plotted as a graphical resection using station pointers. Of recent, offshore fixing progresses in simple object of navigation and fishery, and it is tending to use and develop ocean and coast compositly. Therefore, we compared and analyzed deviation of fixed point for more accurate offshore fixing. This paper used only navigation instruments such as NNSS, Loran-C, Omega involved in long range and world wide among the methods of E. P. F. (Electromagnetic Position Fixing).

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.303-310
• /
• 2018

LoRaWAN(Long Range Wide Area Network) is a standard for low-power, long-range, low-speed communication as announced in the LoRa Alliance. LoRaWAN addresses the physical layer and medium access control layer and the technology used in the physical layer is referred to as LoRa. LoRa can be used for remote monitoring and remote control in maritime conditions. However, unlike land, marine environment is not only difficult to construct an infrastructure for service provision, but also difficult to analyze LoRa performance in maritime. In this study, we construct an infrastructure using cloud platform and analyze LoRa link performance in maritime conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2883-2890
• /
• 2015

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field(500m dredging soil transport length). As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.120-130
• /
• 2012

As long span and complex bridges are constructed often recently, safety estimation became a big issue. Various types of measuring instruments are installed in case of long span bridge. New wireless technologies for long span bridges such as sending information through a gateway at the field or sending it through cables by signal processing the sensing data are applied these days. However, The case of occurred accidents related to bridge in the world have been reported that serious accidents occur due to lack of real-time proactive, intelligent action based on recognition accidents. To solve this problem in this study, the idea of "communication among things", which is the basic method of RFID/USN technology, is applied to the bridge monitoring system. A sensor node module for USN based intelligent bridge system in which sensor are utilized on the bridge and communicates interactively to prevent accidents when it captures the alert signals and urgent events, sends RF wireless signal to the nearest traffic signal to block the traffic and prevent massive accidents, is designed and tested by performing TinyOS based middleware design and sensor test free Space trans-receiving distance.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.33-40
• /
• 2010

Multizeros(multiple order zeros) optical beams which belong to the Laguerre-Gaussian beams, have rotational phase and conically-shaped amplitude structures around multizeros points in their phase and amplitude profiles, respectively. Especially, they have their own characteristics that the multizero points do not vanish over free-space propagation. Therefore, they are expected to be adequate for the applications of long-range optical measurement by using their multizero points as optical markers for the deformation sensing. In this paper, fundamental properties of multizeros optical beams for long-range optical measurement applications are investigated and clarified. In particular, the mathematical investigations are described on the characteristics of multizeoros optical beams such as (1) separation of a multizero into isolated single order zeros, (2) topological charge of zeros distribution which are induced by superposing them. And also the outline of a fundamental experiment and its result are explained briefly.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.9
• /
• pp.315-324
• /
• 1983

Dynamic stability problems have been experienced with a generator connected to an infinite bus through a long transmission line. Nuclear turbine-generator units #1 and #2 at the Winsconsin Electric Power Point Baech Station were found to be dynamically unstable when one unit is isolated on one of the lines to Milwaukee or when two units are isolaed on the lines to milwaukee. Power System Stabilizers(PSS) were applied to the excitation system to provide stable operation under these conditions. Suitable settings for the PSS were predetetermined analytically by computer method and root licus analysis of an equivalent single machine-infinite bus configuration. This procedure allows graphical approach to the design of power stabilizers and serves as assynthesis procedure when the design constraints are relaxed so the the speed stabilizer is required ro provide animprovement in system damping. A simplified model of the complete exciter generator system is shown to be adequate for this type of analysis.