• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.54-61
• /
• 2007

A variable gain low noise amplifier (VG-LNA) implemented in TSMC 0.18 um process is presented. This VG-LNA is designed of two stage amplifier, and its gain is controlled by the shunt feedback loop composed of a gain control transistor (GCT) and a coupling capacitor in second stage. The channel resistance of GCT in the shunt feedback loop influences the input and output stages of a second stage by the Miller effect. Total gain of the proposed VG-LNA is changed by two factors, the load impedance reduction and the interstage mismatch by controlling the channel resistance of the GCT. Consequently, by adding a shunt feedback with a gain control transistor, this proposed VG-LNA achieves both wide gain tuning range of 37 dB and continuous gain control simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.959-965
• /
• 2019

In this paper, we design a low noise amplifier to support ka-band satellite communication systems using 65-nm RFCMOS process. The proposed low noise amplifier is designed with high-gain mode and low-gain mode, and is designed to control the gain according to the magnitude of the input signal. In order to reduce the power consumption, the supply voltage of the entire circuit is limited to 1 V or less. We proposed the gain control circuit that consists of the inverter structure. The 3D EM simulator is used to reduce the size of the circuit. The size of the designed amplifier including pad is $0.33mm^2$. The fabricated amplifier has a -7 dB gain control range in 3 dB bandwidth and the reflection coefficient is less than -6 dB in high gain mode and less than -15 dB in low gain mode.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.257-262
• /
• 2010

We design a CMOS front-end with wide variable gain and low power consumption for 5.25 GHz band. To obtain wide variable gain range, a p-type metal-oxide-semiconductor field-effect transistor (PMOS FET) in the low noise amplifier (LNA) section is connected in parallel. For a mixer, single balanced and folded structure is employed for low power consumption. Using this structure, the bias currents of the transconductance and switching stages in the mixer can be separated without using current bleeding path. The proposed front-end has a maximum gain of 33.2 dB with a variable gain range of 17 dB. The noise figure and third-order input intercept point (IIP3) are 4.8 dB and -8.5 dBm, respectively. For this operation, the proposed front-end consumes 7.1 mW at high gain mode, and 2.6 mW at low gain mode. The simulation results are performed using Cadence RF spectre with the Taiwan Semiconductor Manufacturing Company (TSMC) $0.18\;{\mu}m$ CMOS technology.)

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.346-349
• /
• 1997

칼만 필터는 피드백 제어의 형태를 사용하는 플랜트를 추정한다. 플랜트의 잡음이나 측정 외란이 발생하더라도 상태를 추정하여 최적의 제어를 행한다. 상태를 추정하기 위하여 칼만 필터의 이득 Kk를 저절하고, 이 이득은 칼만 필터의 파라메터인 측정 오차 공분산 Rk과 프로세서 잡음 오차 공분산 Qk를 조정함으로써 뛰어난 필터 수행을 얻을 수 있다. 그러나 필터 파라메터 Rk, Qk는 필터 연산 이전에 측정되어야 하지만, 현재는 전문가가 전문적인 지식을 바탕으로 파라메터를 조정하여 시스템을 제어하고 있다. 따라서 이러한 비효율적인 작업을 퍼지 논리 제어기를 이용하여 온-라인에서 최적의 파라메터 Rk를 구하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.221-226
• /
• 2012

In this paper, wideband two-stage amplification stage was designed, fabricated and evaluated. The proposed amplification stage with a novel gain control method have a high gain, low noise and high linearity performance. It is consisted of common emitter amplifier as the first stage, cascode gain control amplifier as second stage and power detector which sense the received signal strength. The proposed amplification stage shows a total gain of 29 dB~37 dB, noise fiugre of 1.5 dB at operating band and high linearity performance as the IMD (third intermodulation distortion) level is below the noise level of the measurement equipment at the control voltage 2.0 V generated from power detector under the strong electric field condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.924-930
• /
• 2015

In this paper, we propose a novel approach of low computational complexity to improve the speech quality of the small acoustic equipment in noisy environment. The conventional gain control algorithm suppresses the noise of input signal, and then the part of wide dynamic range compression (WDRC) amplifies the undesired signal. The proposed algorithm controls the gain of hearing aids according to speech present probability by using the output of a voice activity detection (VAD). The performance of the proposed scheme is evaluated under various noise conditions by using objective measurement and yields superior results compared with the conventional algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.72-78
• /
• 2009

This paper proposes a low phase noise ring voltage controlled oscillator(VCO) with a standard $0.13{\mu}m$ CMOS process for PLL circuit using the VCO-gain-controlled Delay cell. The proposed Delay cell architecture with a active resistor using a MOS transistor. This method can reduced a VCO gain so that improve phase noise. And, Delay cell consist of Wide-Swing Cascode current mirror, Positive Latch and Symmetric load for low phase noise. The measurement results demonstrate that the phase noise is -119dBc/Hz at 1MHz offset from 1.9GHz. The VCO gain and power dissipation are 440MHz/V and 9mW, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.242-245
• /
• 2001

본 논문은 디지털 위성용 하향변환기에 적용되는 고안정 전압제어 마이크로파 발진기의 위상잡음 특성을 분석하였다. 전압제어 마이크로파 발진기는 능동소자의 비선형 등가모델과 궤환회로의 영향을 고려하여 유전체 공진 마이크로파 발진기를 위상잡음과 출력 전력에 절충(trade-off)하여 설계하였고, 13.25GHz의 발진주파수에서 출력이득은 12dBm이고, 위상잡음은 옵셋 주파수 100KHz 에서 -107.91dBc를 보였다. 바렉터 다이오드 동작에 의한 튜닝 범위는 2MHz/V로 위상동기 발진기에 응용할 수 있음을 보였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.90-95
• /
• 2014

This paper presents a VHF/UHF-band variable gain low noise amplifier for multi-standard mobile TV tuners. A proposed VHF-band variable gain amplifier is composed of a resistive shunt-feedback low noise amplifier to remove external matching components, a single-to-differential amplifier with input PMOS transcoductors to improve low frequency noise performance, a variable shunt-feedback resistor and an attenuator to control variable gain range. A proposed UHF-band variable gain amplifier consists of a narrowband low noise amplifier with capacitive tuning to improve noise performance and interference rejection performance, a single-to-differential with gm gain control and an attenuator to adjust gain control range. The proposed VHF-band and UHF-band variable gain amplifier were designed in a $0.18{\mu}m$ RF CMOS technology and draws 22 mA and 17 mA from a 1.8 V supply voltage, respectively. The designed VHF-band and UHF-band variable gain amplifier show a voltage gain of 27 dB and 27 dB, a noise figure of 1.6-1.7 dB and 1.3-1.7 dB, OIP3 of 13.5 dBm and 16 dBm, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.699-702
• /
• 2012

본 논문에서는 WCDMA(Wide Code Division Multiple Access) 시스템 사양을 만족시키는 주파수 합성기 블록 중 위상잡음 및 전력소모의 최적 설계가 필요한 LC-VCO(voltage controlled oscillator)의 설계를 제안 하였다. 최적 설계를 위한 핵심내용은 LC-tank의 손실성분을 보상하는 MOS트랜지스터의 전달컨덕턴스와 인덕턴스 평면에 여유이득라인과 튜닝 범위 라인을 그어 설계 가능한 영역 내에서 위상잡음이 최소가 되는 인덕턴스 값을 구하고 선택하는 것이다. 제안한 최적 설계방법에 의해 진행된 LC-VCO의 시뮬레이션 결과 위상잡음 특성은 1MHz옵셋에서 -113dBc/Hz였다.