• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.645-650
• /
• 2015

Image restoration is required when the image is blurred due to out of focus or motion during the image acquisition. This type of image restoration is known as ill-posed inverse problem because the estimate of an original image should be derived from only one blurred image. This paper introduces a reference image to facilitate the restoration process. The experimental result shows that computation time is significantly reduced, compared with other methods. The proposed method obtains the estimate of the kernel used in blurring processing. New cost function is defined to update both the image and the kernel alternately. In the last stage, Wiener filter produces the estimate of an original image using the kernel and the reference image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.72-83
• /
• 2011

In this paper, we propose a method to detect and recover the occluded parts of face images using the correlation between pairs of pixels. In a training stage, correlation coefficients between every pairs of pixels are calculated using the occlusion-free face images. Once a new occluded face image is shown, the occluded area is detected and recovered using the correlation coefficients obtained in the training stage. We compare the performance of the proposed method with the conventional method based on PCA. The results show that the proposed method detects and recovers occluded area with much smaller noises than the conventional PCA based method. Moreover, recovered images by the proposed method were more smooth with reduced blurring effect.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.72-79
• /
• 2007

In this paper, It propose a new restoration algorithm of high resolution, which is reconstructed to high resolution image using low resolution image informations. The proposed algorithm is constructed based on super resolution theory, it is consisted of progressive steps of the integration and construction. It reduced a lot of data-processing capacity and noise with integration through sub-pixel movement and wavelet basis through a higher resolution. As a result, it is shown that the main information is maintained and the error rate is improved. Using expansion fuzzy wavelet B-spline interpolation in stage of construction, it is confirmed that we can achieve smoothing image and good resolution without blur and block.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.447-456
• /
• 2005

This paper describes iterative restoration method of restoring blurred images using the LOG compansion function and Conjugate Gradient method. Conventional restoration methods results satisfy the requirement performance for restoring blurred images. but iteration number and convergence velocity increase. This paper proposed an opmtimised iteration restoration method for the images degraded by blurring effect, using the LOG compansion function and Conjugate Gradient method. Here, the LOG compansion function used to improve local properties of the image being restored, made the visual character and convergence velocity of the restored image improved. Throught the simulation results, the author showed that proposed algorithm produced superior performance results by conventional methods.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.519-524
• /
• 2018

Chest examinations and mass chest examinations using the CR(computed radiography) System are frequently used clinically. a factor that degrades image quality in the acquisition process is the use of unused IPs long times. this paper addresses the estimation of winer filter and improved wiener filter to restoration of Chest CR images Experimental results show that the proposed method can reduce noise. in low noise variation image wiener method was excellent than improved method and the result was the opposite at high noise varience. the application of algorithms to chest CR images effectively eliminates noise. the classic Wiener filter was better than the improved method. Multiple patients examined during the process without any erase IP(image plate) process, The proposed algorithm determines that the images can be restored to a good quality and will help to read the images.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.84-89
• /
• 2002

In this paper, we present the design method of noise reduction circuit in telephonic system. The circuit consists of compressor, expander and a filter. The basic idea of a proposed method compresses the audible signal in order to mask the channel noise during transmission and then expand at the reverse rate the transmitted signal to naturally recover the original signal. Of course, there should be no distortion or other degradation of the audio itself in passing through companding(compress/expand) cycle. In the compressing process, the gain of compressor is automatically controlled by the envelope level of input signal in order to increase the effective dynamic range of input signal and to improve the signal to noise ratio. The compressed rate is the root time of a audible signal. The compressed signal should be expanded at the square time of the signal to recover a original signal. Simulation shows the proposed method improves the performance of the noise reduction of a channel noise as well as stability. 

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.44-49
• /
• 2022

Abstract Recently, with the development of IoT technology and communication media, various video equipment is being used in industrial fields. Image data acquired from cameras and sensors are easily affected by noise during transmission and reception, and noise removal is essential as it greatly affects system reliability. In this paper, we propose a weight filter algorithm based on the pixel value distribution pattern to preserve details in the process of restoring images damaged in AWGN. The proposed algorithm calculates weights according to the pixel value distribution pattern of the image and restores the image by applying a filtering mask. In order to analyze the noise removal performance of the proposed algorithm, it was simulated using enlarged image and PSNR compared to the existing method. The proposed algorithm preserves important characteristics of the image and shows the performance of efficiently removing noise compared to the existing method.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.849-855
• /
• 1999

Neural Networks have shown potential to become an attractive alternative to classic methods for identification and control of non-linear dynamic systems. The purpose of this paper is to present an application of neural networks, that is a neural reconstruction of the input signal of a non-linear unknown system. This basic methodology could be used for practical purpose in several engineering fields. Clearly applications of the proposed scheme can be of interest for physical systems where a complete network of sensors measuring system inputs is not available. It should also be emphasized that the application of the reconstruction scheme is of little or no interest when the analyzed system works and operates at nominal conditions. In fact, only when failures and/or system anomailes occur, leasing to performance degradation and/or shutdown, the application of this scheme is of interest. The paper presents the results of the methodology applied to unknown non-linear dynamic systems and the robustness of the scheme to white and colored system noise was evaluated.

• Journal of Korea Multimedia Society
• /
• v.3 no.1
• /
• pp.34-40
• /
• 2000

'[n this paper, we propose an efficient multi-view image coding algorithm which finds the optimal texture from a restricted number of multi-view image. The X-Y plane of the normalized object space is divided into the triangular patches. The depth of each node is determined by appling a block based disparity compensation method. Thereafter the texture of each patch is extracted by appling an affine transformation based disparity compensation method to the multi-view images. We reduced the number of images needed to determine the texture compared to traditional methods which use all the multi-view image in the texture extraction. The experimental results show that the SNR of images encoded by the proposed algorithm is better than that of images encoded by the traditional method by the approximately 0.2dB for the test sets of multi -view image called dragon, santa, city and kid. Image data recovered after encoding by the proposed method show a better visual results than after using traditional method.

• Journal of Korea Multimedia Society
• /
• v.14 no.11
• /
• pp.1392-1400
• /
• 2011

In most digital imaging applications, high-resolution images or videos are usually desired for later image processing and analysis. The image signal obtained from general imaging system occurs image degradation during the process of image acquirement caused by the optics, physical constraints and the atmosphere effects. Super-resolution reconstruction, one of the solution to address this problem, is image reconstruction technique that produces a high-resolution image from several low-resolution frames in video sequences. In this paper, we propose an improved super-resolution method using Projection onto Convex Sets (POCS) method based on Shift & Add (S&A). The image using conventional algorithms is sensitive to noise. To solve this problem, we propose a fusion algorithm of S&A and POCS. Also we solve the problem using BLPF (Butterworth Low-pass Filter) in frequency domain as optical blur. Our method is robust to noise and has sharpness enhancement ability. Experimental results show that the proposed super-resolution method has better resolution enhancement performance than other super-resolution methods.