• Electrical & Electronic Materials
• /
• v.6 no.3
• /
• pp.241-247
• /
• 1993

본 연구에서는 투광성 0.085Ba(L $a_{1}$2/N $b_{1}$2/) $O_{3}$- 0.915Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$(0.45.leq.y.leq.0.70)세라믹을 2단 소성법으로 제작한 후, PbZr $O_{3}$조성 및 온도에 따른 구조적, 강유전적특성을 측정하였다. XRD측정 결과, PbZr $O_{3}$조성이 감소할수록 결자상수 및 단위격자 체적은 감소하였으며 시편의 결정구조는 입방정계에서 능면체정계, 정방정계로 변화되었다. 8.5/60/40시편의 경우 포화분극, 잔류분극 및 항전계가 각각 33.28[.mu.C/$cm^{2}$], 4.15[kV/cm]로 전형적인 메모리 특성을 나타내었으며 PbZr $O_{3}$조성이 증가함에 따라 강유전 이력곡선은 slim loop특성을 나타내었다. 잔류분극은 온도가 증가함에 따라 감소하였으며 특히 PE-FE상경계 부근에 위치한 조성의 경우, 상전이 온도 이하의 온도에서 급격히 감소하는 경향을 나타내었다.다.

• The Korean Journal of Pesticide Science
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2012

This study was carried out to elucidate the residual characteristics and calculate processing factors of difenoconazole in ginseng and its processed products, such as dried ginseng, red ginseng and their water and alcohol extracts. The pesticide was sprayed onto the ginseng according to its pre-harvest intervals in 2009 (four-year-old ginseng) and 2010 (five-year-old ginseng). Harvested ginseng was processed to dried ginseng, red ginseng and their extracts according to the commercially well-qualified conventional methods provided by the Korea Ginseng Corporation. Limit of detection (LOD) and limit of quantitation (LOQ) of difenoconazole in fresh ginseng were 0.001 and 0.003 mg/kg, respectively. In case of processed ginseng products, their levels were 0.002 and 0.007 mg/kg, respectively. Concentration of difenoconazole in both fresh ginseng and its processed products increased with the experimental period. Processing factors, calculated as a ratio of difenoconazole concentration in processed products to fresh ginseng were found to be 1.71 to 2.17 and 1.62 to 2.03 in case of dried and red ginseng, respectively, while those for their extracts ranged from 1.76 to 2.98. In case of five-year-old dried ginseng and red ginseng as well as their extracts, the ranges of processing factor of difenoconazole were found to be 2.9 to 3.1, 1.9 to 2.2 and 2.4 to 4.7, respectively.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.204-209
• /
• 2015

This study was carried out to investigate residual characteristics of insecticide acetamiprid in asparagus under greenhouse condition from July to August and consequentially to obtain basic data for guideline on safe use of this pesticide in asparagus. Residues of acetamiprid in young stem of asparagus before and after removing foliage were analyzed from samples harvested at 0, 1, 3, 5 and 7 days after single application before harvest. As a result, residues of acetamiprid in young stem of asparagus before and after removing foliage at 0 day were 0.27 mg/kg and 0.14 mg/kg, respectively, which were higher than tentative limit (0.1 mg/kg). However, 3 days later residues of acetamiprid were lower than the tentative limit, representing 0.08 mg/kg and 0.03 mg/kg in the asparagus before and after removing foliage, respectively. Acetamiprid was undetectable in both samples at 5 days since the concentrations were less than detection limit (0.02 mg/kg) in this study. In summary, the half-life of acetamiprid in asparagus regardless of removing foliage was quite short under greenhouse condition from July to August, in the range of 1-3 days, and single application of acetamiprid water dispersible granule in/on asparagus at 7 days before harvest would have no problem on safety issues about pesticide residue. This result might be basic information to construct guideline for safe use of acetamiprid in asparagus.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.217-221
• /
• 2012

This study was carried out to evaluate residual characteristics of tolclofos-methyl in ginseng and elucidate the reason for its high detection rate from fresh ginseng selling at markets. Seeds of ginseng were sowed after seed dressing with tolclofos-methyl and after a year of growth, the young seedlings were transplanted to field. They were then harvested annually until three-years of growth and the pesticide residue was analyzed in them. LOD and LOQ of the pesticide were 0.001 and 0.003 mg/kg, respectively. Recovery test was carried out to validate the analytical method for tolclofos-methyl in ginseng. The ginseng seedlings were fortified with the test pesticide at the level of LOQ, ten times of LOQ and maximum residue concentration of tolclofos-methyl. Its recovery ranged from 77.37 to 100.16%. Residual concentration of tolclofos-methyl in ginseng seedlings just before transplanting and two-year-old ginseng were from 7.58 to 8.05 and from 6.46 to 6.79 mg/kg, respectively. In case of three-year-old ginseng, it was found to be from 4.18 to 4.35 mg/kg. As a result of annual pesticide residue analysis, concentration of the pesticide was found to decrease time-coursely in ginseng. This may be due to decomposition and increasing of fresh weight of the ginseng during the cultivation periods of three years.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.328-335
• /
• 2012

In order to use in the classification of minor crop for the mutual application of safe use guideline, it was investigated the residue property of fungicide dimethomorph and pyraclostrobin in green onion, a stem-crop. After pesticides were applied 2 times with 1 week interval in that day of harvest, 3 days, 7 days, 10 days and 14 days before harvest, a green onion was harvested. The residue of dimethomorph in a green onion was 26.31 and 39.08 mg/kg in that day of harvest, however, in according to elapse time, it was reduced to 6.86 and 9.34 mg/kg in 14 days before harvest. In case of pyraclostrobin, it was also reduced from 13.46 and 39.08 mg/kg to 3.57 and 5.21 mg/kg. Based on the residue in that day of harvest, the deposit of spray solution in a green onion was calculated. The deposit of spray solution of dimethomorph was 274.35~345.84 mL/kg, in case of pyraclostrobin, it was calculated 213.65~343.33 mL/kg. When the amount of the deposit of both pesticides was compared in a green onion, it was so similar. On the other hand, it was estimated the predicted dissipation curve of pesticides in the green onion during cultivation. The half-life of dimethomorph was 6.95~7.45 days, in case of pyraclostrobin, 7.15~7.45 days. When both pesticides were compared with the residue property, the deposit of spray solution and half-life of dissipation were so similar.

• The Korean Journal of Pesticide Science
• /
• v.11 no.3
• /
• pp.154-163
• /
• 2007

In order to elucidate the residual characteristics of some pyrethroid insecticides commonly used for Korean cabbage, such as bifentbrin, lambda-cyhalothrin and deltametbrin, the test pesticides were sprayed onto the crop at recommended rate and doubled rate of the recommendation. Their detection limits were 0.004 mg $kg^{-1}$ and mean recoveries at the fortification levels of 0.04 and 0.2 mg $kg^{-1}$ were from 95.16 to 99.32 and from 86.81 to 103.73%, respectively. Half-lives were from 2.5 to 3.6 at the recommended rate and from 2.3 to 3.9 days at the doubled rate of the recommendation. Initial residue amounts of bifenthrin and lambda-cyhalothrin at the recommended rate and doubled rate of recommendation and of deltamethrin at the recommended rate were less than their MRL, whereas, in case of deltamethrin sprayed at doubled rate of the recommendation, the residue level exceeded its MRL. However, the residue levels of the pesticides in the crop sampled at harvest were less than their maximum residue levels and the ratios of the estimated daily intake (EDI) to acceptable daily intake (ADI) for the pesticides tested calculated from the residue data at harvest were less than 7%, suggesting that these pesticides would be safe for Korean cabbage from the residue concern.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.5-14
• /
• 2010

This study was aimed to suggest reliable information of shear strength characteristics due to change of saturation in the landfills or slopes during rainfall infiltration. According to the Mohr-Coulomb failure criteria, the characteristics of shear strength due to change of saturation were analyzed for the weathered residual soils which were sampled in the road construction site of Daejeon city. From the direct shear strength tests, the cohesions and the shear resistance angles were showed maximum values in the condition of optimum moisture content, and then decreased in the condition of wet side compaction. In this study, the cohesions were decreased more than 50% according to increasing saturation by infiltration for the compaction soils. But the reductions of the shear resistance angles were about $1{\sim}2^{\circ}$ which was small value, and thus the changes of the saturation were not nearly influenced the shear resistance angle. The influences of the saturation were seemed to very small for the residual strength parameters according to Mohr-Coulomb failure criteria.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.395-403
• /
• 2006

Recently constructed bridges often have long spans and simple structure details considering not only the function but other important factors such as aesthetics, maintenance, construction duration and life cycle cost. Therefore, bridges require high-performance steels like extra-thick plate steels and thermo-mechanical control process (TMCP) steels. TMCP stels are now gaining wide attention due to their weldability improved strength and toughness. Recently, SM570-TMC steel, which is a high-strength TMCP steel with a tensile strength of 600 MPa, has been developed and applied to steel structures. However, using this steel in building steel structures requires the elucidation of not only material characteristics but also the mechanical characteristic of welded joints. In this study, high-temperature tensile properties of SM570-TMC steel were investigated through the elevated temperature welded joints of SM570-TMC steel were studied through the three-dimensional thermal elasticplastic analyses on the basis of mechanical properties at high temperatures obtained from the experiment.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.26-33
• /
• 2006

This study investigated the characteristics of the biofilm removal by free chlorine or monochloramine. The simulated drinking water distribution pipes on which biofilms had been formed were supplied with tap water containing 0.5, 1.0, 2.0 mg/L of free chlorine or monochloramine residuals. The biofilm removal was characterized by measurement of attached HPC and biomass on pipe surfaces. Chlorine was more effective in both inactivation of attached viable heterotrophic bacteria and removal of biofilm biomass compared to monochloramine. Biofilm matrix was not much eliminated from the surfaces by monochloramine disinfection. Free chlorine residual of 2.0 mg/L was found to be effective in biomass removal. However, biofilm level as low as $10CFU/cm^2$ of attached HPC and $5{\mu}g/cm^2$ of biomass still remained on the surfaces at 2.0 mg/L of chlorine residual. The measurement of biomass appeared to be a useful means in evaluating the characteristics of biofilm removal.

• Journal of the Korean Magnetics Society
• /
• v.8 no.5
• /
• pp.275-281
• /
• 1998

Effects of coupling agents on the rheological and magnetic properties of plastic ferrite magnets were investigated. Magnetic powder used was Sr-ferrite, and binder used was polypropylene (PP), and coupling agents used were ${\gamma}$-methacryloxypropyl trimethoxy silane (A174) and isopropyl triisostearoyl titanate (TTS). It was found that the addition of coupling agents to the PP/ferrite system reduced the melt viscosity and increased the magnetic properties considerably, and the treatment with TTS showed greater effect than A174 did. By comparison with that of the untreated one, the apparent viscosities of the mixtures treated with A174 and TTS decreased 23 % and 50%, respectively, at the shear rate of $1280\; sec^{-1}$ . Untreated plastic magnets showed remanent flux density $(B_r)$ of 1.89 kG and maximum energy energy product $(BH_{max})$ of 0.84 MGOe, and A174 treated magnets showed of Br 2.25 Kg and $BH_{max}$ of 1.23 MGOe. TTS treated magnets showed $B_r$ of 2.35 kG and $BH_{max}$ of 1.33 MGOe.