• 대한기계학회논문집A
• /
• 제39권7호
• /
• pp.707-712
• /
• 2015

용접변형은 용접 시 구조물 내에서의 불균일한 온도분포특성으로 인하여 필연적으로 유발되는 현상이다. 또한 용접변형이 발생된 용접구조물의 일부를 제거하는 과정에서 구조물내의 용접잔류응력과 강성의 연속적인 변화에 따라 추가적인 변형이 발생하여 변형의 재분포가 이루어진다. 특히, 이러한 현상은 선박의 제조과정 중 대형블럭을 옮기기 위해 설치된 러그의 절단과정에서 살펴볼 수 있다. 용접구조물의 부분 제거 시 발생되는 변형의 재분포는 절단공구의 파손 등의 문제를 야기하기도 한다. 본 논문은 실험을 통하여 용접구조물의 부분 제거에 따른 용접변형의 재분포가 어떠한 양상으로 발생되는지 연구하기 위한 것이다. 실험을 위해 필릿용접을 실시하였고, 용접된 리브의 일부를 제거함에 따라 발생되는 종굽힘과 각변형을 측정하여 비교 및 분석하였다.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.36-45
• /
• 1996

Fatigue strength of the spot welded lap joint is considerably influenced by corrosive environments. Particularly, the chloride and the sulfide are most injurious to strength of the spot welded lap joint. Therefore, there is a need to evaluate its effect to corrosion fatigue strength for safe life design of spot welded structures. In order to evaluate their corrosion fatigue strength, corrosion fatigue tests on the spot welded lap joints of the uncoated and the coated high strength steel sheets were conducted in air and in 10% NaCl solution. Corrosion fatigue strength of the uncoated specimens were entirely lower than the coated one in NaCl solution, but those of the coated specimens in NaCl solution were lower than in air. And stress distribution in single spon welded lap joint subjected to tension-shear load was investigated by the finite element method. Using these results, we tried to evaluate corrosion fatgue strength of the various spot welded lap joints with maximum stress $\sigma_{max}$ at edge on loading side of the spot welded lap joint. We could find that corrosion fatigue strength could be quantitatively and systematically rearranged by $\sigma_{max}$.

• 비파괴검사학회지
• /
• 제16권1호
• /
• pp.10-18
• /
• 1996

본 연구에서는 SS41 불림재와 M.E.F. 복합 조직강에 대해서 파괴 역학 파라미터와 X-선 파라미터 사이의 관계를 규명하였다. 피로 균열 진전 실험이 수행되었고, X-선 회절 방법이 피로 파단면에 적용되었다. 피로 파단면을 순차적으로 전해 연마하면서 깊이에 따른 X-선 파라미터(잔류응력, 반가폭)의 변화를 관찰하였다. 최대 소성역 깊이 $w_y$는 SS41 불림재에서는 반가폭의 분포로, M.E.F. 복합 조직강에 대해서는 잔류 응력의 분포로 결정할 수 있었다. 피로 파단면의 깊이 방향에 따른 X-선 파라미터의 분포로부터 $K_{max}$과 $w_y$의 관계식이 실험 데이타로부터 얻어지고, 이 식들으로부터 $K_{max}$은 $w_y$의 측정에 의하여 추정되어질 수 있다.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.51-58
• /
• 2004

Residual stresses, which can be produced during the welding process, play an important role in an industrial field. Welding residual stresses are exerting negative effect on the fatigue behavior and integrity of structure. In this study, as a result of the thermal elasto-plastic finite element analysis for the welds of a nuclear component, the residual stress distributions are estimated for as-welded condition. Also, finite element techniques are developed to simulate the relaxation of the residual stresses according to the various mechanical stress relieving(MSR) loads such as hydrostatic pressure loading, tensile pipe-end loading, and mechanical stress improvement process(MSIP) loading. Finally, the results of residual stress redistributions for various loading conditions are compared and reviewed qualitatively and quantitatively to find an optimum loading condition.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.165-169
• /
• 1996

In this study residual stress in weldment was considered about the effect on the fatigue propagation and about the effect of redistribution of residual stress. Then, fatigue tests were conducted by the center notched specimens machined with welded plate. The residual stress and its redistribution after the crack growth were measured by the magnetizing stress indicator and hole-drilling method. Fatigue crack propagation was estimated by the specimens having residual stress redistributed after the cracks growth and having the effects of crack closure. Crack growth rates were predicted and compared with experimental results. It had been found that the predicted crack propagation rates have a good agreement with experimental results when the redistribution of residual stress was considerd.

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.57-66
• /
• 2013

본 연구에서는 산업폐기물인 저회와 폐어망을 각각 뒤채움 재료와 보강재로 재활용하기 위하여 저회와 폐어망 사이의 인발특성을 분석하였다. 이를 위해 저회로 구성된 지반에 망목크기가 다른 3종류의 폐어망(WFN20 : $20mm{\times}20mm$, WFN30 : $30mm{\times}30mm$, WFN40 : $40mm{\times}40mm$)과 지오그리드를 보강재로 사용하여 인발시험을 수행하였다. 인발시험 수행 결과, 지오그리드와 동일한 망목크기를 갖는 WFN20의 인발마찰각은 지오그리드와 유사하게 나타났다. 이것은 WFN20의 인장강도와 강성은 지오그리드 보다 작으나, WFN20의 두께가 지오그리드 보다 커서 횡리브에 의한 지지력이 발현되었기 때문이다. 보강재의 잔류변형률 분포는 연직응력에 의존한다. 연직응력이 증가함에 따라 보강재 선단에 인발력이 크게 집중되어 변형이 크게 나타난다.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.47-54
• /
• 2013

본 논문에서는 Alloy 82/182를 용접재로 이용한 원자로 배관 이종금속 맞대기 용접부(Dissimilar Metal Butt Weld)에서의 PWSCC에 의한 균열성장 거동을 평가하였다. 이를 위해 먼저 유한요소 응력해석을 수행하여 이종금속용접부에서의 응력분포를 결정하였으며, 이때 이종금속용접 및 동종금속용접에 의한 용접잔류응력 외에 수압시험과 정상운전 조건도 고려하여 기계적 하중에 의한 응력 재분배를 고려하였다. 최종적으로 이와 같이 구한 응력 분포를 바탕으로 PWSCC에 의한 축방향 및 원주방향 가상 균열의 균열성장 거동을 평가하여 PWSCC 균열 성장량을 계산하였다. 본 논문의 결과는 향후 PWSCC에 의한 원자로 배관 이종금속 맞대기 용접부의 균열성장 거동 예측에 적용될 수 있다.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2003

The objective of this paper was to investigate the welding characteristics according to the restraint condition. the pass number, and the shield gas quantity with titanium commonly using in power stations, aircrafts, ships, and so forth. The residual stress distribution was measured under restraint and nonrestraint welding conditions. The tensile strength and elongation of the 4 pass welded specimen were shown higher about 10% and 30% than those of the 7 pass welded specimen at the same welding conditions respectably. Also, the more shield gas quantity and the shorter natural cooling time, the higher tensile strength and the lower elongation.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.8-13
• /
• 2004

The purpose of this paper is to investigate the welding residual stress distribution according to the constraint or non-constraint welding condition with titanium commonly using power station, aircraft, and ship. The measuring method of the residual stress was applied stress release rating method with strain gages and a potable strain meter. The x direction residual stress generally showed the tensile residual stress in case of res03int welding. On the other hand, the x direction residual stress under non-restraint welding were changed tensile stress into compressive stress on 15mm away from welding bead center. Also, the y direction residual stress generally showed the tensile residual stress in case of non-restraint welding and the y direction residual stress under restraint welding were changed tensile stress into compressive stress about 60mm away from welding bead center.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.72-79
• /
• 2015

Evaluation of fracture toughness of welded structures has a significant influence on the structural design. However the residual stresses is redistributed while the welded structures is cut for preparing specimens. This study investigated an effect of the welding residual stress redistribution on the impact absorption energy of Charpy specimen. SA516Gr70 steel plate by at the flux cored arc welding (FCAW) and gas tungsten arc welding(GTAW) was cutting. Specimens for Charpy impact testing were taken from the welded plate. Two material removal mechanisms (wire cutting and water jet) were used to make the specimens. Welding residual stress and redistribution residual stress were measured using the XRD (X-Ray Diffraction) method. The amount of redistribution of residual stress depends on the different material removal mechanism. Redistribution of residual stress of reduced the impact absorption energy by 15%.