• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.277-283
• /
• 2000

This study was conducted to investigate the effect of ozone treatment on the growth and pesticide-residual contents of soybean sprouts during cultivation. Total weight and length of the soybean sprouts treated by 0.3 ppm ozone water for 30min during soaking of soybean increased 27% and 19% higher than those of control group, respectively. But 27% of root weight decreased. No major differences in growth state were observed between the treatments during soaking and watering with ozone water, and watering with ozone water. Pesticide residues in soybeans treated with carbendazim, captain, diazinon, fenthim, dichlorvos and chlorpyrifos ranged from 4.75 to 8.35 ppm. The pesticides in soybean sprouts by the treatment of soaking and watering with water for 5 days, those by 0.3 ppm ozone-water watering, and those by soaking and watering with 0.3 ppm ozone water were destroyed to $85{\sim}99$, $89{\sim}100$ and $94{\sim}100%$, respectively. The order of degradation ratio in the pesticides was captan>dichlorvos>fenthion>carbendazin>diazinon>chlorpyrifos.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.81.1-81.1
• /
• 2012

나노임프린트 리소그라피(Nano-Imprint Lithography, NIL) 기술은 기판위의 resin을 나노구조물이 각인된 스탬프로 눌러서 나노구조물을 형성하는 기술로, 경제적이고 효과적으로 나노구조물을 제작할 수 있는 기술이다. 그중에서도 UV 기반의 나노임프린트(UV-NIL) 기술은 resin을 투명한 스탬프로 누른뒤 UV로 경화시켜 나노구조물을 형성하는 기술로써 고온, 고압($140{\sim}180^{\circ}C$, 10~30bar)이 필요한 가열식 나노임프린트 기술에 비해 상온, 상압($20^{\circ}C$, 1bar)에서도 구조물 형성이 가능하여 다층구조 형성에 적합하다. 연속적인 임프린팅 공정에 의해 resin이 quarz 스탬프에 잔류하여 패터닝에 결함을 유발하게 되므로 오염물을 제거하기 위한 세정공정이 필요하다. 하지만 UV에 의해 경화된 resin은 cross-linking을 형성하여 화학적인 내성이 증가하게 되므로 제거하기가 어렵다. 현재는 resin 제거를 위한 세정공정으로 SPM($H_2SO_4/H_2O_2$) 세정이 사용되고 있는데 세정시간이 길고 세정 후에 입자 또는 황 잔유물이 남으며 많은 유해용액 사용의 문제점이 있어 효과적으로 resin을 제거할 세정공정이 필요한 상황이다. 본 연구에서는 친환경적인 UV 세정 및 오존수 세정공정을 적용하여 경화된 resin을 제거하는 연구를 진행하였다. 실험샘플은 약 100nm 두께의 resin을 증착한 $1.5cm{\times}1.5cm$ $SiO_2$ 쿠폰 wafer를 사용하였으며, UV 및 오존수의 처리시간을 달리하여 resin 제거효율을 평가하였다. ATR-FTIR 장비를 사용하여 시간에 따른 resin의 두께를 측정한 결과, UV 세정으로 100nm 높이의 resin중에 80nm의 bulk resin이 단시간에 제거가 되었고 나머지 20nm의 resin thin film은 오존수 세정으로 쉽게 제거되는 것을 확인 하였다. 또한 표면에 남은 resin residue와 particle을 제거하기 위해서 SC-1 세정을 진행하였고 contact angle과 optical microscope 장비를 사용하여 resin이 모두 제거된 것을 확인하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.3
• /
• pp.296-308
• /
• 2010

The peroxone process overcomes many of the limitations associated with conventional and advanced water treatment systems using chlorine disinfection and ozone oxidation processes. Ozone and hydrogen peroxide generate highly reactive hydroxyl free radical which oxidize various organic compounds and has highly removal efficiency. The key issue to operate peroxone process is developing the method to achieve high process effectiveness when scavengers that inhibit generation of OH radicals or consume OH radicals are co-existing in the process. Also many studies, to minimize inorganic oxidative by-products such as bromate and to reduce disinfection by-products after chlorination behind peroxone process, are needed. And we should consider the excess residual hydrogen peroxide in the water. On-line instruments and control strategies need to be developed to ensure effective and robust operation under conditions of varying load. If problems above mentioned are solved, peroxone process will be applied diversely for water treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.347-356
• /
• 2017

Oxidation of erythromycin, sulfamethazine and sulfathiazole by ozone was experimentally investigated to see the effects of background water quality such as ultrapure water, humic acid and biologically treated wastewater and water temperature on the removal rate, consequently to provide design information when the ozone treatment process is adopted. Initial concentration of the antibiotics was spiked to $10{\mu}g/l$ and ozone dose was 1, 2, 3, 5, 8 mg/l. While the removal rate of erythromycin under ultrapure water background by ozone oxidation was over 99%, that under humic acid and biologically treated wastewater background was markedly reduced to the range of 59.8%~99% and 17.0%~99%, respectively. When water temperature is decreased from $20^{\circ}C$ to $4^{\circ}C$, the removal rate is reduced from the range of 17.0%~99% to the range of 9.4%~97.4% under biologically treated wastewater background. The effects of background and temperature on the removal rate of sulfamethazine and sulfathiazole were similar to erythromycin, but the degree was different. Therefore, it is concluded that the background of water to be treated as well as water temperature should be taken into consideration when the design factor such as ozone dose is determined to meet the treatment objective in the ozone treatment process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.286-286
• /
• 2020

인공함양은 대수층함양관리 중 하나의 기법이며 하수처리장 방류수의 영향을 직·간접적으로 받은 물을 지하대수층에 함양하여 수질의 향상을 기대할 수 있다. 그러나 방류수의 영향으로 인해 다수의 미량유해물질들이 대수층으로 유입됨에 따라 함양 후 회수할 때 이들의 검출이 빈번해졌다. 이에 따라 이 미량유해물질의 제거를 위해 인공함양의 후속 공정으로 나노막 여과를 고려하여 인공함양과 나노막 공정을 통하여 미량유해물질의 거동을 파악하고자 하였다. 본 연구에서는 인공함양 지하저수지 모사 컬럼을 설계하여 실험하였다. 서울특별시 탄천 하류에서 샘플링한 물을 원수로 사용하였으며 인공함양에 앞서 염소, 과망간산염, 오존의 3종류 산화 전처리를 통하여 그 영향을 확인하고자 하였다. 함양기간은 2.5일이었으며 함양 후 나노막 장치를 통하여 최종 유출수를 획득하였다. 인공함양 결과 용존유기물은 45%~63% 수준에서 제거가 되어 인공함양시 용존유기물의 제거가 가능함을 확인하였다. 산화 전처리에 따른 동화가능유기탄소의 증가로 인하여 생분해가 주요 기작인 인공함양 처리를 통하여 동화가능유기탄소의 제거율이 유기용존탄소의 제거율에 직접적으로 영향을 주었음을 알 수 있었다. 미량유해물질로 알려진 과불화화합물의 경우 산화 전처리에 따른 제거는 관찰되지 않았으며 잔류의약물질의 경우 대상 물질의 물리·화학적 특성에 따라 산화시 제거가 가능함을 확인하였다. Iopromide와 같은 조영제의 경우 오존 산화를 통하여 98% 이상 제거되어 산화를 통한 제거가 가능함을 확인하였다. 인공함양시 과불화화합물은 분자량이 큰 PFNA, PFDA, PFOS 등이 제거되었으며 그 제거율은 각각 최대 >99%까지 도달하였다. 분자량이 작은 과불화화합물의 경우 인공함양을 통과하는 경향을 보였다. 잔류의약물질의 경우 생분해가 용이한 물질은 제거가 됨을 확인하였으며 carbamazepine 등 제거가 안 되는 물질은 제거율이 18% 미만으로 확인하였다. 나노막 여과 결과 과불화화합물이 최대 >99%까지 제거됨을 확인하였으며 미량유해물질의 경우에도 대부분의 물질이 제거됨을 확인하였다.

• Journal of Environmental Science International
• /
• v.10 no.6
• /
• pp.417-422
• /
• 2001

The vertical structure of atmosphere was observed In investigate the variation of surface ozone concentration by vertical downward mixing of residual ozone in the atmospheric boundary layer at the Busan coastal area. Airsonde and pilot balloon measurements were made at Gamcheondong and the Kimhae airport for April 26~27, 1996. The vertical potential of potential temperature showed a residual layer between 510m and 1800m from 2100LST April 26 to 0900LST April 27. The downward mixing of ozone in the residual layer of the atmospheric boundary layer was confirmed from vertical profile of mixing ratio near 600m in the morning. The thickness of the sea breeze layer was 900m at 1500LST April 26. Thereafter, it become to be lowered with time A low level jet was measured near 900m at 0300LST on April 27 from a pibal measurement. Early morning sharp increase of surface ozone concentration at the Busan coastal area was caused by vertical downward mixing of ozone concentration rather than by photochemical reaction In the atmospheric boundary layer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.524-533
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Aim of this work is to determine design and operating parameters of a hybrid air cleaning system. DBD and ESP(Electrostatic Precipitator) are used as nano particle charger and collector, respectively. Pelletized MnO$_2$ catalyst or activated carbon is used fer ozone decomposition or adsorption material. AC voltage of 7～10 KV(rms) and 60 Hz is used as DBD plasma source. DC - 8 KV is applied to the ESP for particle collection. The overall particle collection efficiency for the hybrid system is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized MnO$_2$ catalyst or activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• Journal of fish pathology
• /
• v.12 no.1
• /
• pp.42-48
• /
• 1999

The disinfectant effects of total residual oxidants (TROs) produced by ozonization of natural sea water were investigated against fish pathogenic bacteria isolated from flounder and red seabream. The concentration of 0.1 mg TROs/liter was stable for 20 min in filtered natural seawater, and those of 0.3 and 0.5 mg TROs/liter were also stable for more 1 hr. Disinfectant effects of TRO against Edwardsiella tarda, Vibrio sp., Streptococcus sp. and Staphylococcus sp. were observed with a concentration of 0.1 mg/liter for 180 sec, and the treatment killed more than 99.9% of bacterial cells. With TROs of 0.3 to 0.5 mg/ liter, the viable cells of the bacteria were reduced by more than 99.99% in 60 sec.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.27-32
• /
• 2000

The hydrolysis of pesticides by ozone was studied using the ozone generator manufactured for home appliance. Ozone was treated to remove the residual pesticides in the vegetables such as lettuce, cabbage, spinach and Japanses parsely. The experimental results were optimistic with removal efficiency of more than 50%, but its achievement depends on the operational hours of zone generator and chemical structures of pesticides. This report was determined as an optimal conditions for the removal rate of pesticides as follows: ozone input concentration in the contactor was $2mg/{\ell}$, ozone contact time was at least 30 min without washing vegetables, but it was OK at 10 min in case that number of washing increases.