• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1438-1446
• /
• 2016

The objectives of this study were to investigate the effects of superheated steam (SHS) treatment on the physicochemical and microbial properties of garlic. The garlic was treated by SHS at temperatures of 100, 150, 200, 250, 300, and $350^{\circ}C$ for 60 s. The moisture content of raw garlic was lower than that of SHS-treated garlic. The total thiosulfinate and pyruvate contents were dramatically reduced by SHS treatments. The antioxidant activities of garlic measured by ferric reducing/antioxidant power, 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical scavenging assay, and total phenolics content decreased by SHS. The major volatile sulfur compounds of garlic such as diallyl disulfide, allicin, allyl sulfide, diallyl sulfide, and diallyl trisulfide were significantly reduced by SHS. The antimicrobial effects of raw garlic were stronger than those of SHS-treated garlic against three strains of bacteria, including Staphylococcus aureus, Escherichia coli, and Bacillus cereus. However, total aerobic bacteria in garlic were dramatically reduced by SHS from 8.6 to 2.9 log CFU/g. The results from the sensory evaluation show that SHS treatment of garlic above $200^{\circ}C$ provides better acceptably due to reduction of off-flavor and pungency of garlic. These results suggest that superheated steam treatment can used as an efficient process for reducing garlic off-flavor and pungency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.705-715
• /
• 2010

The adoption of carbon foot print system is being activated mostly in the developed countries as one of the long-term response towards tightened up regulations and standards on carbon emission in the agricultural sector. The Korean Ministry of Environment excluded the primary agricultural products from the carbon foot print system due to lack of LCI (life cycle inventory) database in agriculture. Therefore, the research on and establishment of LCI database in the agriculture for adoption of carbon foot print system is urgent. Development of LCA (life cycle assessment) methodology for application of LCA to agricultural environment in Korea is also very important. Application of LCA methodology to agricultural environment in Korea is an early stage. Therefore, this study was carried out to find out the effect of lettuce cultivation on agricultural environment by establishing LCA methodology. Data collection of agricultural input and output for establishing LCI was carried out by collecting statistical data and documents on income from agro and livestock products prepared by RDA. LCA methodology for agriculture was reviewed by investigating LCA methodology and LCA applications of foreign countries. Results based on 1 kg of lettuce production showed that inputs including N, P, organic fertilizers, compound fertilizers and crop protectants were the main sources of major emission factor during lettuce cropping process. The amount of inputs considering the amount of active ingredients was required to estimate the actual quantity of the inputs used. Major emissions due to agricultural activities were $N_2O$ (emission to air) and ${NO_3}^-$/${PO_4}^-$ (emission to water) from fertilizers, organic compounds from pesticides and air pollutants from fossil fuel combustion in using agricultural machines. The softwares for LCIA (life cycle impact assessment) and LCA used in Korea are 'PASS' and 'TOTAL' which have been developed by the Ministry of Knowledge Economy and the Ministry of Environment. However, the models used for the softwares are the ones developed in foreign countries. In the future, development of models and optimization of factors for characterization, normalization and weighting suitable to Korean agricultural environment need to be done for more precise LCA analysis in the agricultural area.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.322-331
• /
• 2016

Oil budget calculator identifies the removal pathways of spilled oil by both natural and response methods, and estimates the remaining oil required response activities. A oil budget calculator was newly developed as a response tool for Deepwater Horizon oil spill incident in Gulf of Mexico in 2010 to inform clean up decisions for Incident Comment System, which was also successfully utilized to media and general public promotion of oil spill response activities. This study analyzed the theoretical background of the oil budget calculator and explored its future application to Korea. The oil budge calculation of four catastrophic marine pollution incidents indicates that 3~8% of spilled oil was removed mechanically by skimmers, 1~5% by in-situ burning, 4.8~16% by chemical dispersion due to dispersant operation, and 37~56% by weathering processes such as evaporation, dissolution, and natural dispersion. The results show that in-situ burning and chemical dispersion effectively remove spilled oil more than the mechanical removal by skimming, and natural weathering processes are also very effective to remove spilled oil. To apply the oil budget calculator in Korea, its parameters need to be optimized in response to the seasonal characteristics of marine environment, the characteristics of spilled oil and response technologies. A new algorithm also needs to be developed to estimate the oil budget due to shoreline cleanup activities. An oil budget calculator optimized in Korea can play a critical role in informing decisions for oil spill response activities and communicating spill prevention and response activities with the media and general public.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2016

Water drainage from the open hydroponics often causes significant environmental pollution due to agrochemicals and loss of water and nutrients. The objectives of this study were to show the potential application of an irrigation schedule based on threshold values of volumetric substrate water content for tomato (Solanum lycopersicum L. 'Samsamgu') cultivation in a commercial hydroponic farm during spring to summer cultivation. This study was performed for minimizing effluent from coir substrate hydroponics using a frequency domain reflectometry (FDR) sensor-automated irrigation, as compared with an integrated solar-radiation (IR) and conventional timer-irrigation (TIMER) after transplanting. In results, no significant difference in daily irrigation volume was found among the treatments until 88 days after transplant (DAT). However, during the 88 to 107 DAT, the daily irrigation volume was in the order of IR (2125 mL) > TIMER (2063 mL) > FDR (1983 mL), and during the 108 to 120 DAT, it was in the order of IR (2000 mL) > TIMER (1664 mL) > FDR (1500 mL). The lowest drainage volume was observed in the FDR treatment with the order of IR (12~19%) > TIMER (4~12%) > FDR (0~7%) during the entire growing period. A lower irrigation volume in the FDR treatment after 88 DAT may be due to the sensor's detecting capacity for less water absorption by plant after completing fruit maturity with apical pruning and removal of lower leaves, while a higher irrigation volume in the IR treatment may be due to gradual increase in integrated solar-radiation amount as closer to summer season. There was no significant difference in plant growth and fruit yield among the treatments; however, a 11% and 18% of higher soluble sugar content was observed in the FDR than that of TIMER and IR treatment. respectively.

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.63-74
• /
• 2006

In order to identify the Pb pollution and its sources in continental shelf and slope areas, Pb concentration and Pb isotope ratios ($^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$) were determined far 6 box corer sediments collected from the southern East/japan Sea. Pb concentration, and $^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$ ratios were constant at around $25\pm5 ppm$ and 0.842 and 2.092 from 1700 to 1930 year, respectively and increased steadily up to $40\pm5 ppm$ and 0.867 and 2.123 at the beginning of 1990s', respectively. The increase of concentration and isotope ratios in the labile fraction (leached by 2M HC1+0.5M $HNO_3$) explains their increase in bulk sediments, while Pb concentration and isotope ratios in the residual fraction were nearly constant during 300yrs. Temporal variation of Pb isotope ratios was explained by simple two end-members mixing of geo-genic and anthropogenic sources because isotope ratios and the inverse of Pb concentration showed the good linear relationships. Using Pb isotope ratios, we can constrain two Pb sources in the study area. The one is atmospheric particulates, compared with mean values of isotope ratios in atmospheric particulates collected at Jeju and Oki ;stands, based on the history of Pb emmission in Korea and China, and judged by oceanographic processes capable of homogenizing many sources. The other is local sources related to iron mills, refineries of Pb ore and of petroleum located at the coast of the study area. Isotope ratios of anthropogenic Pb can be estimated using two end-members mixing equation and were $0.879\pm0.005\;and\;2.144\pm0.008$ before 1950s' while they increased up to $0.900\pm0.008\;and\;2.162\pm0.011$ after 1980s', respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1041-1051
• /
• 2005

In order to assure the safety of the seaweeds, we measured the contents of the trace metals in the seaweeds harvested from Korean coastal area. We collected 620 marine algal samples from fourteen areas, and then analyzed the trace metals such as Hg, Cd, Cr, Cu, Mn, Ni, Pb and Zn. The contents of Hg, Cd, Ni and Mn were higher in the seaweeds collected from Chungnam Taean area. The contents of Cr and Cu were higher in the seaweeds collected from Yeongdeok and Tongyeong area, respectively. And Pb and Zn were highly detected from the seaweeds of Ulsan area. The mean levels of trace metals were high in the order of Zn $(48.02\pm41.20{\mu}g/g)\;>\;Mn (34.63\pm38.95{\mu}g/g)\;>\;Cu(6.29\pm6.52{\mu}g/g)\;>\;Ni(2.17\pm4.00{\mu}g/g)\; >\;Cr(1.61\pm2.35{\mu}g/g)\;>\;Pb(1.28\pm2.37{\mu}g/g)\;>\; Cd(0.67\pm0.75{\mu}g/g)\;>\;Hg(0.02\pm0.02{\mu}g/g)$. Zn was consistently most abundant metal in all samples, followed by Mn and Cu, which are very important for human health. There were higher contents of Hg and Cd in brown algae, the contents of Cr, Cu, Mn, Ni and Pb in green algae, the content of Zn in red algae among them. Additionally, significant linear correlations were observed between a total 28 different pairs of metals, of them, the correlation factor between Cr and Ni showed the highest (r=0.374, p<0.001). The trace metal contents of seaweeds varied with habitats and kinds of samples, nevertheless they showed very safe level in edible seaweeds tested. Scytosiphon lomentaria, which has been known as a little use of food, have shown a clear selectivity for Cr and Pb. Among non-edible seaweeds, Sargassum thunbergii for both Cd and Mn, Lomentaria hakodatensis for Ni and Grateloupia prolongata for Zn have shown a clear selectivity, respectively. Therefore, these seaweeds could be useful as bioindicator for each trace metal pollution.

• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.97-108
• /
• 2002

The use of land at the time of investigation of groundwater quality in the rapidly urbanized Bu-chon city is classified into 5 categories based on the change process of land use. The difference in groundwater quality according to the land use and its usage period is tested by non-parametric statistical procedures. The seven constituents of water quality with the highly frequent detection in the area for this study are used for the statistical test. The shallow groundwater quality within the areas of the same land use at the time of investigation varies significantly according to the period of land usage. The concentration of KMnO$_4$consumed and hardness is significantly higher in the old residential area (of more than 20 years old) than in the younger one (of less than 10 years old). The quality of the shallow groundwater is also significantly different among the three categories with the similar period of land usage (of more than 15 years old). The concentration of No$_3$-N, hardness and total solid is significantly higher in the residential area than in the agricultural one (namely, the area used as paddy fields 2 to 5 years ago). The median concentration of these constituents is 2.2 to 3.8 times higher in the residential area than in the agricultural one. The concentration of NO$_3$-N, KMnO$_4$, consumed and Cl is significantly higher in the industrial area than in the agricultural one. The median concentration of these constituents is 5.5 to 18 times higher in the industrial area than in the agricultural one. The concentration of KMnO$_4$consumed is significantly higher in the industrial area than in the residential area. The median concentration of these constituents is 12 times higher in the industrial area than in the residential one. The spatial distribution of shallow groundwater quality in the rapidly urbanized area is closely related to the period of land usage as well as the land use, which is presumed to be attributed to the difference in the concentration and leakage rate of the contaminants leaking from damaged sewer into shallow groundwater.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2009

This research was performed to assess a Fenton-like oxidation using naturally present iron in the field to treat remained oils throughout silty clay residues which finally resided even after a series of soil washing process. Biodegradability was thus tested for reaction products to investigate a possible treatment of the Fenton-like oxidation coupled with a biological treatment process. For those purposes, two types of field soil samples (e.g., dewatered cake after conditioning with a polymer and not-dewatered residue) were tested to remove TPH by adding the various concentration of hydrogen peroxide ($H_2O_2$). Moreover the biodegradability of treated samples was observed based on the ratio of $BOD_5/COD_{Cr}$ after Fenton-like oxidation. The Highest removal of TPH was at 1% of hydrogen peroxide ($H_2O_2$) when hydrogen peroxide ($H_2O_2$) was continuously injected for a period of time rather than that of spot introduction with the same amount of it. For the dewatered cake, TPH was effectively treated when the ratio of solid and water was mixed at 1 : 2. Employing cooking oil could increase solubility of TPH due to enhanced surface-active escalating TPH desorption from silty clay. Nonetheless, the biodegradability was decreased as long as the oxidation duration being extended regardless of operational conditions. It was therefore proved that Fenton-like oxidation using $H_2O_2$ and natural iron minerals was able to remove adsorbed oils in silty clay but the removal efficiency of TPH was low. And if a biological treatment process followed after Fenton-like oxidation, microorganisms would need enough time for acclimation.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.43-51
• /
• 2006

Generally abandoned mine soils have serious problems for introducing vegetation such as nutrient deficiency, poor physical properties, and phytotoxicity due to high levels of heavy metals. It is required to improve soil amenity for revegetation. One of its strategies is using organic materials such as compost manure and sludge. The pot experiments was conducted to evaluate the effects of pig manure and municipal sewage sludge on revegetation of mining area soil surface with Artemisia princeps and Zoysia japonica. Application rate of pig manure and municipal sewage sludge was $75{\sim}225$ Mg/ha and $150{\sim}450$ Mg/ha, respectively. The results showed that the application of manure and sludge increased organic matter about two-fold and total nitrogen contents about five-fold of mine soil and improved the growth of plants in all treatments compared to the control. The result of plant tissue analysis showed that both plants accumulate Cd, Cu and Zn in root tissue rather than shoot tissues. Increased sludge application reduced Zn accumulation in both plant tissue. Sequential extraction results indicated that addition of soil amendment induced increment of organically bound fractions of Cu and Zn. Organically bound fraction of Zn was significantly increased from 7.84% to 13.58% in Artemisia princeps planted soil and from 7.84% to 14.16% in Zoysia japonica planted soil, thereby bioavailability of heavy metals was reduced. The results suggested that application of organic materials to mine soil can reduce phytotoxicity of heavy metals and be helpful in introducing successful revegetation.