• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.57-57
• /
• 2021

최근 급격한 도시화와 기후변화로 인해 도시의 홍수피해가 증가하고 있으며, 복합적인 재난으로 악화되는 경우가 많아졌다. 복합재난으로 인한 피해를 줄이기 위해 재해발생 전·후 대응이 중요하며, 이를 위해 복원력 개념을 도입할 필요가 있다. 도시 배수 시스템의 복원력은 대상유역의 면적과 절대적인 침수량에 따라 좌우된다. 따라서 지역의 도시 배수 시스템의 복원력을 정확하게 평가하기 위해 대상유역의 정보를 반영한 지역 맞춤형 복원력 지수의 개발이 필요하다. 대상유역의 정보를 반영하기 위해 도시 배수 시스템의 배수능력을 복원력 지수에 적용하였다. 도시 배수 시스템의 배수능력을 나타내기 위해 시스템 잔류유량을 분모로, 침수량을 분자로 하여 복원력 지수를 계산하였다. 본 연구에서는 제안된 새로운 복원력 지수를 대구 비산 빗물펌프장에 적용하였다. 강우자료는 재현기간이 100년, 200년 그리고 300년 빈도의 확률강우량을 사용하였으며, 지속시간은 30분, 60분 그리고 90분으로 설정하였다. 침수량과 시스템 잔류 유량은 1분 단위로 EPA SWMM을 통해 값을 구하였다. 시스템 잔류 유량을 기반으로 하는 복원력 지수는 최소 0.995029에서 최대 0.998662로 나타났다. 본 연구에서 제안한 도시 배수 시스템 잔류 유량 기반 복원력 지수는 배수 시스템의 처리 능력을 반영한 지수라고 할 수 있으며 배수 시설의 설치, 교체 및 재건 등 수해 방재 계획 평가에 활용될 수 있다.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.60-67
• /
• 2000

This study was conducted to elucidate extraction efficiency by microwave in comparison with Soxhlet for extraction of pesticide residues in dried medical herbs; red-ginseng, white-ginseng, Bupleuri Radix, Angelica gigas Nakai, Rehmannia glutinosa. The acetone extraction by microwave of tolclofos-methyl and quintozene in medical herbs was efficient. The extraction efficiency by microwave with power 45 to 150 watts, extraction time 1 to 5 minutes and solvent volume 30 ml was compared with that of Soxhlet with extraction time 7 hours and solvent volume 150 ml. The extraction efficiency by microwave with extraction time 3 to 5 minutes was similar with extraction time of 7 hours by Soxhlet. When medical herbs spiked with tolclofos-methyl and quintozene was analyzed to how the extraction efficiency of microwave by kind of medical herbs, the extraction efficiency by microwave with extraction time of 3 to 5 minutes was the same as Soxhlet extraction. The optimal condition for extraction of tolclofos-methyl and quintozene in medical herbs by microwave was 45 to 90 watts of power supply, 3 to 5 minutes of extraction time and acetone 30 ml of solvent volume.

• Journal of fish pathology
• /
• v.35 no.1
• /
• pp.93-102
• /
• 2022

This study performed a trichlorfon (TCF) residue and pharmacokinetic analysis with Japanese eels, Anguilla japonica, to obtain baseline data to establish the maximum residue level (MRL) of TCF in A. japonica. After dipping A. japonica in 30 ppm and 150 ppm of TCF at 28℃ and 18℃, drug residue in the body was analyzed with LC-MS/MS, and these results were further analyzed with the PK solver program to obtain the pharmacokinetic parameters of TCF in the serum, muscles, and liver. The maximum concentrations (C_max) in the serum, muscles, and liver were 25.87-357.42, 129.91-1043.73, and 40.47-375.20, respectively, and the time to maximum concentration (T_max) was 0.13-1.32h, 1.17-3.34h, and 0.14-5.40h, respectively. The terminal elimination half-life (T_1/2) was 2.13-3.92h, 5.30-10.35h, and 0.65-13.81h, respectively. In the 30 mg/L concentration group, TCF was not detected in the serum of eels 96 hours after bathing, and was below the detection limit after 336 hours in muscle and liver. On the other hand, in the 150 mg/L concentration group, TCF was not detected in the serum of eels 336 hours after bathing, but was detected in muscle and liver at 336 hours. In conclusion, the results of this study would be useful in establishing the MRL of TCF in farmed A. japonica.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2012

Residual stress is developed in the injection molded articles during the molding process due to temperature variation and shear stress. The residual stress causes the deformation and warpage in the injection molded parts shortly within several days or after several years. Therefore, the injection molding conditions should be optimized to reduce the residual stress. And residual stress in the part should be also relaxed after molding process to maintain its shape. According to the annealing conditions, such as relative humidity, temperature and time, this study investigates the relaxation of residual stress generated in the transparent injection molded specimens. Through the experimental results, it was realized that the residual stress was relaxed at a relative humidity higher than 50%. Utilizing photoelasticity equipment, it was found that the residual stress was rapidly relaxed near glass transition temperature. Additionally, we recognized that the specimen shrunk along the flow direction but expanded to the perpendicular direction of the flow during the annealing processes, which resulted in the warpage of the specimen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.130-130
• /
• 2015

플라즈마를 이용한 cleaning, etching, sputtering 공정에서 발생하는 마이크로아크방전이나 turn-off후의 잔류정전기는 공정대상물의 절연파괴나 전자소자에 전기적 손상을 유발함으로서 공정의 불량률을 증가시키는 중요한 요인이 된다. 본 연구에서는 잔류정전기를 관찰하기위하여 실린더형 챔버구조의 평행평판 전극구조를 지닌 용량결합형 플라즈마에서 powered electrode에 부착된 유전체 기판 표면의 잔류 정전기의 변화 양상을 planar type probe로 측정해보았다. 300mtorr 압력에서 아르곤가스로 발생시킨 플라즈마가 존재할 때 낮은 음전위 평균값을 가지던 기판표면 전위가 전력인가가 중지되었을때 20V 가량의 양전위를 가질 수 있음을 측정 하였고, 이것을 COMSOL MULTIPHYSICS TOOL을 활용한 시뮬레이션과 비교하였다. 이 현상이 파워인가 전극이 플라즈마 영역에 노출되느냐에 따라 발생할 수 있음을 알게 되었고, 그 크기와 지속시간은 입력전력 및 블로킹 커패시터와 유전체 기판의 정전용량에 의존함을 확인 하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.225-227
• /
• 2010

본 논문은 OFDM 방식의 고속 광대역 모뎀의 주파수 오프셋을 추정하고 보상하는 알고리즘에 관한 것이다. 설계된 주파수 오프셋 추정 및 보상 알고리즘은 프리앰블 구간에서 초기 CFO(carrier frequency offset)를 추정 및 보상하고, 데이터 전송구간에도 잔류 CFO를 추정하고 보상하도록 동작한다. 초기 CFO보상은 시간축에서 동작하고, 잔류 CFO 보상은 FEQ 뒤에서 파일럿 캐리어의 정보를 이용하여 이루어진다. 잔류 주파수 오프셋을 보상할 때에는 ADC/DAC의 SFO(sampling frequency offset)도 추정하여 잔류 CFO와 동시에 보상하게 된다.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.372-378
• /
• 1996

고크롬주철에 있어서 기지 및 탄화물의 조직제어는 내마모성의 향상을 위해 필수적이다. 특히 기지조직내의 잔류오스테나이트함량은 최적 내마모성을 얻기위해 반드시 조절되어야 한다. 본 연구에서는 3% C-18%(or 25%)Cr-Mo-Ni-Mn 고크롬주철을 80$0^{\circ}C$, 90$0^{\circ}C$, 100$0^{\circ}C$ 및 110$0^{\circ}C$의 질소분위기 하에서 각각 20분 불안정화열처리를 행한 후 공냉시켰다. 잔류오스테나이트의 함량은 Xtjs 회절시험을 통해 측정하였으며 회절 peak는 $\alpha$200, $\alpha$220, ${\gamma}$220그리고 ${\gamma}$311을 이용하였다. 화학조성, 불안정화열처리의 온도 및 시간, 그리고 잔류오스테니이트함량강의 관계식을 도출하였다.

• Korean journal of applied entomology
• /
• v.14 no.1 s.22
• /
• pp.29-33
• /
• 1975

The experiment It·as conducted to find out the distribution of fenitrothion in rice plants at the preheading stage and its residue in harvested grains. The results obtained were as follows; 1. Distribution of fenitrothion in rice plants were measured 15.32 ppm attached to the leaf surface immediately after spray and 6.73 ppm was penetrated into tissues after 24 hours. 2. Residual amounts of fenitrothion in rice grains was 0.04 ppm at chaff and 0.01 ppm at unpolished rice, respectively.

• Journal of Food Hygiene and Safety
• /
• v.14 no.4
• /
• pp.365-371
• /
• 1999

Microwave-assisted extraction (MAE) is known as a more environmental-friendly process with economic advantages in terms of less time, less solvent, less energy and less waste than the current reflux method that is time-consuming. MAE was applied to extract three pesticides (quintozene, tolclofos-methyl and procymidone) from ginseng in a pesticide residue analysis and eliminate pesticide contaminants from ginseng prior to production of the ginseng extracts. The optimal conditions for pesticide extraction from ginseng were 50% in power (150 watts), 2 minutes, 20 mL hexane and 2.0 g sample. The results of optimal conditions were compared with those of Soxhlet method (7 hours, 150 mL hexane). The recoveries between two methods were almost same while time and amount of solvent used in MAE were significantly decreased in comparing with those in the Soxhlet methods. When the 45% ethyl alcohol as a extraction solvent was applied to eliminate pesticides from ginseng prior to the production of the ginseng extracts, it was found that 100% quintozene, 69％ tolclofos-methyl and 83% procymidone were eliminated from ginseng. The data showed that MAE may be used to eliminate pesticide contaminants in ginseng prior to making the ginseng extracts.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.228-235
• /
• 2014

The residue levels of flonicamid and its metabolites, 4-(trifluoromethyl)nicotinic acid (TFNA) and N-4-(trifluoromethyl)nicotinoyl glycine (TFNG) in sweer pepper were investigated to examine the residual characteristics of analytes for 87 days after pesticide application. The pesticide was applied once at recommended dosage and double dosage by foliar sprays and the samples of fruits and leaves of sweet pepper were collected for each treatment. The residues of flonicamid in all of fruits and leaves decreased gradually over time, while the residue levels of TFNG metabolite exhibited tendency that increased for long periods and thereafter decreased. Total flonicamid residual concentrations containing metabolites residues in fruit samples increased consistently until 30 days post-application and higher residue levels than residues at 1 day post-application were detected from 30 day to 87 day after treatment. The residue pattern observed in fruit could be explained by the movement of TFNG from leaves to fruits of plant. Such residual characteristic was similarly found in samples treated both recommended dosage and double dosage.