• 한국도로학회:학술대회논문집
• /
• 2002.10a
• /
• pp.89-92
• /
• 2002

The objective of this research is to evaluate engineering properties of recycled aggregates, slag as coarse & fine aggregate and waste foundry sand(WFS) as fine aggregate, in hot mix asphalt(HMA). In this research, soundness, gradation and particle analysis, abrasion, specific gravity and absorption test were carried out. The optimum asphalt binder content(OAC) for various HMA combinations of recycled aggregate was determined by Marshall Mix Design. The ranges determined is between 7.2% and 7.5%. Indirect tensile test, resilient modulus test, creep test were carried out for characterization of rutting behavior of various combination of HMA. Judging from the limited tests, the HMA with recycled aggregates is not as good rutting resistance as the HMA with common aggregates. After finishing the Wheel tracking test, the application or feasibility for the use of recycled aggregate as asphalt paving material will be determined.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.444-444
• /
• 2013

변형 다중양자우물은 전자 소자와 광전자 소자에 응용할 수 있는 가능성 때문에 연구가 많이 진행되고 있다. 합성 물질들의 초격자를 연속적으로 증착, 성장하는 디지털 합금은 다중양자우물을 활용한 광전자 소자에서 응용가치가 상당히 높다. 현재 디지털 합금을 이용한 다중양자우물의 성장과 관련한 연구가 활발히 진행되고 있고, 특히 InzGaxAl1-z-xP/InAlP 다중양자우물은 광전자 소자로서의 응용가치가 부각되고 있다. 그러나 InzGaxAl1-z-xP/InAlP 다중양자우물의 성장 및 광학적 성질에 대한 연구는 많이 진행되었으나, InzGaxAl1-z-xP/InAlP 다중양자우물에서의 변형효과를 고려한 전자적 성질에 대한 연구는 미흡하다. InzGaxAl1-z-xP/InAlP 다중양자우물에 대한 전자적 성질의 연구는 광소자의 성능 향상을 위해 매우 필요하다. 본 연구에서는 디지털 합금 성장 방법으로 형성한 InzGaxAl1-z-xP/InAlP 다중양자우물의 부띠 사이 천이와 전자 분포를 고찰하였다. 온도에 따른 광루미네센스의 측정을 통해 InzGaxAl1-z-xP/InAlP 다중양자우물에서 나타나는 부띠 사이의 천이를 관찰하였다. 가변 메시 유한 차분법을 이용한 이산적 모델을 통해 변형효과가 다중양자우물 구조에서 부띠에 주는 영향을 조사하였다. 격자의 불일치로 인한 변형 효과와 8-band envelope function approximation을 고려한 슈뢰딩거 방정식을 사용하여 InzGaxAl1-z-xP/InAlP 다중양자우물에서의 전자 부띠 에너지와 에너지 파동 함수를 계산하였다. 계산한 부띠 사이 천이 에너지와 광루미네센스 측정에서 보인 엑시톤 천이 에너지를 비교하였을 때, 작은 차이 값이 나타났다. 증착과정에서의 이종접합사이에서 발생하는 불확실성을 고려한다면 이 차이 값은 오차범위 안에 포함되며, 계산 값과 실험 값이 잘 일치하는 것으로 볼 수 있다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.35-44
• /
• 2008

A self-centering energy-dissipative(SCED) bracing system has recently been developed as a new seismic force resistant bracing system. The advantage of the SCED brace system is that, unlike other comparable advanced bracing systems that dissipate energy such as the buckling restrained brace(BRB) system, it has a self-centering capability that reduces or eliminates residual building deformations after major seismic events. In order to investigate the effects of torsion on the SCED brace and BRB systems, nonlinear time history analyses were used to compare the responses of 3D model structures with three different amounts of frame eccentricity. The results of the analysis showed that the interstory drifts of SCED braced frames are more uniform than those of BRB frames, without regard to irregularity. The residual drift and residual rotation responses tended to decrease as irregularity increased. For medium-rise structures, the drift concentration factors(DCFs) for SCED systems were lower than those for BRB frames. This means that SCED-braced frames deform in a more uniform manner with respect to building height. The effect of the torsional irregularity on the magnitude of the DCFs was small.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.141-152
• /
• 2015

If we look into genre movie, we can see that almost similar forms are repeated in a movie. Such similar elements are largely divided into three units from a mass of story to a very small camera angle. Those can be explained as Formula, Convention, and Iconography. Among those three, convention means custom and it is a structure or an incident in which one story can be divided into second one. Convention is an incident visualized in individual genre, and a movie director tunes audiences through the incident. The director leads a familiar story but all of a sudden, he transforms the familiar scene to a new story. As a product established from the beginning of movie history, movie convention helps communication between audiences and a director. Audiences familiarize themselves with movie convention through repeated activities of watching movies, and the director utilizes it to provide audiences with familiarity. Director Bong Joon-ho not only tunes audiences through traditional convention but also creates a new art work through transformation of convention. A study is conducted on how he used traditional convention and transformation to get a new idea and to engage in his work through his work .

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.467-475
• /
• 2012

Static and dynamic train load tests were conducted to evaluate the train load transfer mechanism in the roadbed which was retained by two types (fully and partially) of segmental retaining walls reinforced by geogrid. The test roadbed was 2.6m high, 5m wide, and 6m long. A combination of earth pressure gages, displacement transducers, and strain gages were placed in specific locations to measure the responses. Test results showed that the wall displacement pattern as well as the earth pressure for the fully reinforced retaining wall was different from those for the partially reinforced retaining wall. In the dynamic train load test, the strain in the upper part of the wall tended to decrease, and both the residual deformation and the rate of the deformation were significantly lower than those in the current design standard.

• Journal of Korea Game Society
• /
• v.18 no.1
• /
• pp.125-134
• /
• 2018

This paper presents a practical method to efficiently extract the rotational part of a $3{\times}3$ matrix that changes continuously in time. This is the key technique in the corotational FEM and the shape matching deformation popular in physics-based dynamic deformation. Recently, in contrast to the traditional polar decomposition methods independent of time, an iterative method was proposed that formulates the rotation extraction in a physics-based way and exploits an incremental representation of rotation. We develop an optimization method that reduces the number of iterations under the assumption that the maximum magnitude of the incremental rotation vector is limited within ${\pi}/2$. Realistic simulation of dynamic deformation employs a sufficiently small time step, and thus this assumption is not problematic in practice. We demonstrate the efficiency and practicality of our method in various experiments.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.135-140
• /
• 2005

A solid state emulsion haying high velocity gradient shows two important transition ranges in the plot of storage modulus(G') as a function of shear strain, when the state is changed from solid to liquid. However, a solid state emulsion having low velocity gradient shows only one apparent transition range when the change from solid to liquid state takes place. The result implies the importance of the surface properties in the solid state emulsion. The addition of water phase in the solid state emulsion reduces the modulus in the modulus in the surface transition range by increasing interfacial friction and weakening the matrix. The addition of pigments increases the modulus in the modulus in the surface transition range by reinforcing the matrix, when there is no wafer phase in the solid state emulsion. When the solid state emulsion has water phase, however, the addition of pigments decreases the modulus in the modulus in the surface transition range.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.2-25
• /
• 2021

This study evaluated gender preferences regarding the mechanical properties of polymers that are typically used as cooperative robot skin. Gender-based preferences of workers aged 20~30 and polydimethylsiloxane were examined according to the body parts which is most frequently in contact with the robot during operation. The factors influencing preference, i.e., stiffness and stickiness, as measured by strain rate and contact angle, respectively, were analyzed to compare gender-based differences. Female preferred stiffer materials with small strain rates while male preferred softer materials with large strain rates. As a result of evaluating mechanical properties of the materials to relate to gender-based preference, we found that female tended to prefer Dragon-skin with the lowest stickiness, and a low strain rate, during compressive creep tests. In contrast, male tended to prefer Ecoflex with high strain rate regardless of stickiness. Therefore, these results provide basis for material selection when considering cooperative robot skin.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.143-150
• /
• 1998

Many enzymes catalyze a primary reaction and/or secondary reaction. Dextransucrase usually synthesize dextran from sucrose as a primary reaction. The secondary reaction of dextransucrase is the transfer of glucose from sucrose to carbohydrate accepters. We have reacted dextransucrase from Leuconostoc mesenteroides B-742CB with sucrose and starches; granule or gelatinized starches, and Small or Potato starches. The yield of modified starch was ranged from 46% to 72%(s.d.<${pm}$5%) of theoretical depends on various reaction conditions. Modified products were more resistant against the hydrolysis of ${alpha}$-amylase, isoamylase, pullulanase and endo-dextranase than those of native starch. Based on the reactions from enzyme hydrolysis and methylation followed by acid hydrolysis modification of granule starch was more efficient than the modification of gelatinized starch. After modification of granule starch with dextransucrase, there produced a soluble modified starch. After modification the starch granules were fractionated to small size. The positions of glucose substitution of the modified products were determined by methylation followed by acid hydrolysis and analyzed by TLC. The products were modified by the addition of glucose to the position of C3, C4 and C6 free hydroxyl group of glucose residues in the starch.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.47-58
• /
• 2018

Duncan & Chang(1970) proposed the Duncan-Chang model that a linear relation of transformed stress-strain plots was reconstituted from a nonlinear relation of stress-strain curve of triaxial compression test using hyperbolic theory so as to estimate an initial tangent modulus and ultimate deviator stress for the soil specimen. Although the transformed stress-strain plots show a linear relationship theoretically, they actually show a nonlinearity at both low and high values of strain of the test. This phenomenon indicates that the stress-strain curve is not a complete form of a hyperbola. So, if linear regression analyses for the transformed stress-strain plot are performed over a full range of strain of a test, error in the estimation of their linear equations is unavoidable depending on ranges of strain with non-linearity. In order to reduce such an error, a modified regression analysis method is proposed in this study, in which linear regression analyses for transformed stress-strain plots are performed over the entire range of strain except the range the non-linearity is shown around starting and ending of the test, and then the initial tangent modulus and ultimate deviator stresses are calculated. Isotropically consolidated-drained triaxial compression tests were performed on compacted weathered soil with a modified Proctor density to obtain their model parameters. The modified regression analyses for transformed stress-strain plots were performed and analyzed results are compared with results estimated by 2 points method (Duncan et al., 1980). As a result of analyses, initial tangent moduli are about 4.0% higher and ultimate deviator stresses are about 2.9% lower than those values estimated by Duncan's 2 points method.