• Korean Journal of Agricultural Science
• /
• v.6 no.2
• /
• pp.166-184
• /
• 1979

In order to prevent the water loss in the irrigation canal constructed on the sandy gravel layer or on the other highly permeable ground layer, lining has been practiced. Many studies have been done so far on the lining method to prevent the water loss in the irrigation canal and recently studies on the lining with plastic film or polyethylene film were also reported. However, the plastic film or polyethylene film has low strength and is liable to break, and water loss from pin hole caused by contacting with sand or gravel is highly predicted. This study was then conducted to find proper lining and buring method in canal construction of polypropylene mat after coated with vinyl, as one way to overcome the shortcoming frequently observed when plastic or usual polyehtylene film were used. Eventhough rather longer periods of experiments are needed to attain reliable and accurate results on the variation of durability, the durability of asphalt coated area, or on the damage due to freeze after burial or exposure of polypropylene mat, the experiemental results obtained during one year of period are summarized as follows: 1. The curvature at the area between canal bottom and side slope had increased stability and saved consruction cost. The relationship among the variation of curvature, the reduction of polypropylene mat and the reduced amount of soil cutting at each side slope was presented in Fig. 7 through 9. 2. The depth of covering material to protect polypropylene mat was desired to be over 30cm, considering the water depth, side slope, canal cleaning practices, traffic, or back pressure of irrigation period. 3. In order to increase the canal stability and to prevent slope erosion, sandy soil was required, to be placed under ground, and coarse gravel should cover the surface area of canal. 4. The studies on the stability of side slope in the canal should consider the passive area on the bottom and the slope should be about 1 to 2, considering the slope stability, allowable velocity and tractive force. 5. When compared with earth lining, the lining with polypropylene mat coated with vinyl was responsible to save 28% and 37% of canal lining cost, when the soil carrying distances were 500 and 700m. respectively. 6. The water interception was almost completely attained when the polypropylene mat coated with vinyl was used for lining. But further studies were assumed to be necessary for the use of asphalt since the strength of polypropylene mat connected with asphalt will vary with duration.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.65-89
• /
• 2004

Up to now, the studies for a pond of ancient palace of Korea are mainly achieved in a landscape architectural field. In fact, we can't grasp the general aspects but we are only heard about the fragmentary ruins and remains by the people who are in charge of an archaeological excavation. In this thesis, therefore, I attempt to grasp the relational categories of the ponds of an ancient palace of Korea, and find out the ideological backgrounds of the ponds of a palace construction through classify them excavated so far. The ancient ponds of Korea are divided to the class of square ponds(I) and curved ponds(II) according a shapes of planes. The class of square ponds(I) are subdivided to the form IA of the class of square ponds and form IB of the class of square ponds by whether it has an island, artificial hill and ornamental stone or not. And the class of the curved ponds(II) are divided to the form IIC that is only composed of curves in shore and the form IID that is composed of curves and straight lines. According the size, it is divided to a small size that is below the maximal diameter, 20m, and a large size that is more than 45m, after all, the ponds of the ancient palaces are devided to IAa, IAb, IBa, II Ca, IICb, IIDa. The square ponds and the curved ponds are co-exist from the initial stage when a pond of a place was found in our country and are succeeded or changed after Silla unified the three Kingdoms. In other words, we can infer a continuity from the earlier stage from the fact that there is a flat figure ground mainly constituted by the ponds of a palace mixed up of a straight line and a curved line in United Silla Kingdom while it succeeds the ponds of a palace that has a square form of Goguryo in Balhai. Different from the successional relation of the flat figure grounds, in an aspect of the elements of the construction, the site of the arbor at the top of the island and the bridge facilities in a field of a palace those are not exist in three Kingdoms period are appeared in United Silla Kingdom. The point that this aspect is simultaneously appeared in a neighboring country, or Japan, allows us to infer that there may be some motivations cause the changes in a construction of the ponds of a palace of Korea, China and Japan from the latter half of the 7th century to the first half of the 8th century. The ideological backgrounds of the ponds of a palace construction are divided roughly into Taoism and Buddhism. We can recognize that the ponds of a palace made up of the islands, the artificial hills and the garden rocks reflect Taiosm, considering the records of the ponds a palace of Korea and China are all use the term, Taoism, or the concrete statement represents that the islands, the artificial hills and the garden rocks are used in the description of the ponds of a palace of Korea. Both two are, therefore, obviously differentiated from the ponds of a palace that doesn't include them. We can conclude that the ponds of a palace that doesn't include them are colored by Buddhism since they are overtly distinguished from the class of curved ponds that reflect Taoism at the same period and they are identical with the site of an ancient temples in an aspect of their type and construction.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.371-405
• /
• 2004

International circulation of cultural assets involves numerous countries thereby making an approach based on international law essential to resolving this problem. Since the end of the $2^{nd}$ World War, as the value of cultural assets evolved from material value to moral and ethical values, with emphasis on establishing national identities, newly independent nations and former colonial states took issue with ownership of cultural assets which led to the need for international cooperation and statutory provisions for the return of cultural assets. UNESCO's 1954 "Convention for the Protection of Cultural Property in the Event of Armed Conflict" as preparatory measures for the protection of cultural assets, the 1970 "Convention on the Means of Prohibiting and Preventing the Illicit Import and Transfer of Ownership of Cultural Property" to regulate transfer of cultural assets, and the 1995 "Unidroit Convention on Stolen or Illegally Exported Cultural Objects" which required the return of illegally acquired cultural property are examples of international agreements established on illegal transfers of cultural assets. In addition, the UN agency UNESCO established the Division of Cultural Heritage to oversee cultural assets related matters, and the UN since its 1973 resolution 3187, has continued to demonstrate interest in protection of cultural assets. The resolution 3187 affirms the return of cultural assets to the country of origin, advises on preventing illegal transfers of works of art and cultural assets, advises cataloguing cultural assets within the respective countries and, conclusively, recommends becoming a member of UNESCO, composing a forum for international cooperation. Differences in defining cultural assets pose a limitation on international agreements. While the 1954 Convention states that cultural assets are not limited to movable property and includes immovable property, the 1970 Convention's objective of 'Prohibiting and preventing the illicit import, export and transfer of ownership of cultural property' effectively limits the subject to tangible movable cultural property. The 1995 Convention also has tangible movable cultural property as its subject. On this point, the two conventions demonstrate distinction from the 1954 Convention and the 1972 Convention that focuses on immovable cultural property and natural property. The disparity in defining cultural property is due to the object and purpose of the convention and does not reflect an inherent divergence. In the case of Korea, beginning with the 1866 French invasion, 36 years of Japanese colonial rule, military rule and period of economic development caused outflow of numerous cultural assets to foreign countries. Of course, it is neither possible nor necessary to have all of these cultural properties returned, but among those that have significant value in establishing cultural and historical identity or those that have been taken symbolically as a demonstration of occupational rule can cause issues in their return. In these cases, the 1954 Convention and the ratification of the first legislation must be actively considered. In the return of cultural property, if the illicit acquisition is the core issue, it is a simple matter of following the international accords, while if it rises to the level of diplomatic discussions, it will become a political issue. In that case, the country requesting the return must convince the counterpart country. Realizing a response to the earnest need for preventing illicit trading of cultural assets will require extensive national and civic societal efforts in the East Asian area to overcome its current deficiencies. The most effective way to prevent illicit trading of cultural property is rapid circulation of information between Interpol member countries, which will require development of an internet based communication system as well as more effective deployment of legislation to prevent trading of illicitly acquired cultural property, subscription to international conventions and cataloguing collections.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.21-28
• /
• 1973

This report is prepared to promote cocoon natures for the use of silk reeling material. It is easily understandable that there must be disuniformity composed with superior group and inferior group in commercial silkworms. If such different groups be seperated by some method, it would be a great contribution for the cocoon production. For a comparative purpose, silkworm sex seperation carried out because male silkworms produce more silk than female worms. The author has developed a new chemical reagent available for the seperation of superior group and inferior group from commercial silkworms, which he has named it as Better Hybrid Controller (BHC). The obtained comparative results are summarized as followings. 1. Basic investigation of BHC application a) In case BHC applied with hybrid worms and pure line, the former one starts to adapt mulberry leaves earlyer than pure line variety. b) The mulberry adapting interval distribution of pure line worms after BHC application showed U type distribution, but hybrid worms showed L type or Poisson's distribution. c) In case of BHC application with silkworms, the longer period application is, the duller distribution was formed. d) When silkworms are seperated in two groups by use of BHC application, the earlyer mulberry adapted group is seemed as stronger than the other part and the group ratio is 2 : 1. 2. Comparation between sex seperation result and better hydrid control (BHC) seperation result. a) The cocoon shell per cent of male worm group showed betweer result than the female group but only 0.4% difference between sexes. b) The cocoon shell per cent of superior group, seperated by BHC, showed 0.7% more than the inferior group. c) The average cocoon shell per cent of BHC treated cocoons showed much more than the Control group as 1.6∼2.4% increase. Enven the inferior group showed better result than the Control. d) Such unexpected result is considered to be the result that BHC application is activating some thing with silkworm physiology. e) On the ether hand, the result of sexes seperated groups or male worm group did not show desirable conclusion as far as cocoon shell per cent is concerned. f) However, when the male group was reeled as silk, it showed much better silk yield or silk per cent of cocoon than the female group as much as one per cent difference between by sexes. Such result was brought by superior silk yield from cocoon shell as much as 87.4%. g) On the other hand, the male group showed lowest non breaking reelable ratio (63%) among all group comparation. h) When we compare cocoon qualities by sex seperation and BHC seperation against the Control, there is no qualitative change, but BHC group showed quantitative promotion with cocoon bave length as much as about hundred meters. i) In case of calculation for productive income of cocoon production, BHC applied group showed about ten per cent income promotion more than the Control. The sexes seperated group, however, showed rather negative result because the male cocoon produced poor weight per box eggs which could not cover it by the inclose of silk yield of it. j) So, the BHC application with the fetched worm stage brought about big promotion for cocoon production. k) BHC method may be used either for seperation purpose or quantitative promotion with whole silk-worms. 3. Only male silkworms rearing did not show desirable productivity, so there is no reason to work out it in the fetching stage of worm.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.445-458
• /
• 2016

Most of water curtain cultivation (WCC) area in Korea has been inveterately suffering from the gradual draw-down of groundwater level and related shortage of water resources at the late stage of WCC peak time. To solve this problem, artificial recharge techniques has been recently applied to some WCC area. This study introduces infiltration gallery, which is one of the artificial recharge methods, and tentatively examined the effectiveness of three galleries installed at Sangdae-ri WCC area of Cheongju City. Seven galleries are set up at each empty space between eight vinyl houses in this area and its dimension is designed as 50 cm in each width and height and 300 cm in each length. Installation process was including bed excavation, backfill with gravels and silica sands, and completion of gallery by equipment of piezometer and covering with non-woven cloth. For each B, C, D gallery, 3 types of test including preliminary, four step and one long-term injection were performed. The first preliminary test showed the rough relations between injection rates and water level rise as follows; 20 cm and 30 cm level rise for $33.29{\sim}33.84m^3/d$ and $45.60{\sim}46.99m^3/d$ in B gallery; 0 cm, 16 cm and 33 cm level rise for $21.1m^3/d$, $33.98m^3/d$ and $41.69m^3/d$ in C gallery; 29 cm and 42 cm level rise for $48.10m^3/d$ and $52.23m^3/d$ in D gallery. Afterwards, more quantitative results estimating effectiveness of artificial recharge were reasoned out through stepped and long-term injection tests, which is expected to be employed for estimating water quantity re-injected into the aquifer through these galleries by natural injection over the period of WCC peak time.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2005

Many case histories of re-liquefaction phenomena seem to support the idea that sand deposits, if they once have been liquefied, could be reliquefied again by a subsequent earthquake even though the earthquake is smaller than the previous one. The magnitude of the strains induced in the initial liquefaction has a significant influence on the resistance of the sample to re-liquefaction. The deposits undergoing liquefaction experience large shear strain during liquefaction. And this previous strain changes the microstructure into highly anisotropic structure such as columnlike structure and connected voids. This type of anisotropy is so unstable that it can reduce re-liquefaction resistance. It is blown that the extent of anisotropic structural change depends on the gradation characteristics of ground. The purpose of this study is to estimate the correlation between the gradation characteristics of the sand and the ratio of re-liquefaction resistance to liquefaction resistance. In this study, 1-g shaking table tests were carried out on five different kinds of sands. During the tests the values of excess pore pressure at various depths and surface settlements were measured. Re-liquefaction resistances were not affected by the initial void ratio and the effective confining pressures, and the deposits of all test sands which had once been liquefied were reliquefied in the cyclic loading number below 1 to 1.5. The ratio of re-liquefaction resistance to liquefaction resistance linearly decreased as $D_{10}/C_u$ increased, and was constant as about 0.2 above the value of $D_{10}/C_u$, 0.15 mm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.203-209
• /
• 2009

Yield monitoring is one of a precision agriculture technology that is used most widely. It is spatial variability analysis of yield information that should be attained with yield monitoring system development. This experiment was conducted to evaluate spatial variability of yield and grain moisture content in rice paddy field, and their relationships to rice productivity. It is necessary to minimize sampling interval for accurate yield map making or to control cutting width of rice combine. Considering small rice plots such as $0.2{\sim}0.4$ ha, optimum size of sampling plot was below 15 m more than 5 m in with and length. In variable rate treatment field, average yield was similar, but yield variation was reduced than conventional field. Gap of yield by another plot in same field was bigger than half of average yield than yield variation was significantly big. Therefore yield measuring flow sensor must be able to measure at least 300 kg/10a more than 1000 kg/10a. Variation of moisture content in same field was not big and spatial dependance did not appear greatly. But, variation between different field is appeared difference according to weather circumstance before harvesting. Change of spatial dependence of yield was not big, because of field variation of moisture content is not big.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.233-240
• /
• 2011

We evaluated the changes of fruit quality factors and the incidence of physiological disorders during the periods of high temperature environment in 'Wonhwang' and 'Whasan' pears to determine appropriate harvest time for exportation. In 'Wonhwang' pears, the fruits harvested at 130 days after full bloom (DAFB) showed 31.3 and 17.6N of flesh firmness after 5 and 10 days after simulated marketing at $30^{\circ}C$, respectively, while those of the fruits harvested at 135 DAFB lowered to 16.7 or 6.9N, respectively. Whereas, 'Whasan' pear showed higher firmness during 14 days of high marketing condition than 'Wonhwang' pears which represented 30.4, 26.5 and 21.6N in the fruits harvested 145, 150 and 155 DAFB, respectively. Higher soluble solid contents and lower acidity values observed in the late harvested fruits in both cultivar along with increased marketing period at $30^{\circ}C$. Late harvested 'Wonhwang' pears showed higher respiration rate and ethylene production than early harvested ones, while those of 'Whasan' pears showed lower values regardless of fruit maturity which represented less than 50% of 'Wonhwang' pears. The incidence of physiological disorders such as internal browning, water soaking, flesh spot decay, core breakdown and pithiness appeared more severely in the fruits of 'Wonhwang' in accordance with the progress of high temperature marketing and fruit maturity. Whereas, those symptoms were occurred only after 14 days of prolonged marketing time in 'Whasan' pears. Consequently, it was needed to pay more attention to determine the ripeness when the fruits exported to the country with high temperature environment, especially in the fruits of 'Wonhwang' pears showing rapid quality loss and severe physiological disorders.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.397-405
• /
• 2003

The cleanness of Korean(n=292), Chinese(n=46), Japanese(n=114) and Western(n=74) styles restaurants in 25 districts in Seoul was evaluated in terms of kitchen area(6 criteria), handling of raw materials(3 criteria), hygiene practice for cook(1 criteria), treatment of wastes(2 criteria) and hall(2 criteria). The western-style restaurants were scored the highest points in all criteria. The other three restaurants were poorly evaluated compared with western-style ones in kitchen area, including cleanness of inside of the kitchen, hygiene practice, ventilation and working environment, drainage, and storage of utensils. The most critical criterion which represents the overall evaluation was the ventilation and working environment of the kitchen for Chinese, Japanese and Western-style restaurants, and was the cleanness of inside the kitchen for Korean-style restaurants.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.14-22
• /
• 2016

A trial of combining and quantifying the effects of food processing on various pesticides was carried out using a meta-analysis. In this study, weighted mean response ratios and confidence intervals about the reduction of pesticide residue levels in fruits and vegetables treated with various food processing techniques were calculated using a statistical tool of meta-analysis. The weighted mean response ratios for tap water washing, peeling, blanching (boiling) and oven drying were 0.52, 0.14, 0.34 and 0.46, respectively. Among the food processing methods, peeling showed the greatest effect on the reduction of pesticide residues. Pearsons's correlation coefficient (r=0.624) between weighted mean response ratios and octanolwater partition coefficients ($logP_{ow}$) for twelve pesticides processed with tap water washing was confirmed as having a positive correlation in the range of significance level of 0.05 (p=0.03). This means that a pesticide having the higher value of $logP_{ow}$ was observed as showing a higher weighted mean response ratio. These results could be used effectively as a reference data for processing factor in risk assessment and as an information for consumers on how to reduce pesticide residues in agricultural products.