• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.190-191
• /
• 2017

본 연구는 산림 공간에서 산불소화시설인 수관수막타워의 방수시간에 따른 화재에 미치는 영향을 FDS(Fire Dynamics Simulator, 화재시뮬레이션)로 비교하였다. 본 연구를 진행하기 위한 기본 조건은 수관수막타워 높이 20m, 방수길이 40m, 방수량 400Lpm으로 해석공간 상에 수막타워를 3기 설치하였다. 수관수막타워 작동 초반 화재온도 $668.5^{\circ}C$에서 작동 450초 후 $145.6^{\circ}C$으로 감소되는 효과를 볼 수 있다. 이는 '산불소화시설 설치 및 운영 관리 지침'의 제3조 11절 6항의 '수관수막설비는 산불 접근 예상시간보다 10분전에 가동되도록 해야 한다.'의 타당성을 마련할 수 있다.

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.300-309
• /
• 2007

본 연구는 신호교차로에서의 딜레마 죤 범위를 산정하고 신호위반 단속의 허용 범위를 분석하는데 있다. 각 교차로 접근로별 조사 자료를 토대로 딜레마 죤의 범위를 산정하였고, 이를 토대로 신호위반 단속에 있어 딜레마 죤의 영향을 최소화 할 수 있는 방안을 제시하고자 하였다. 기존의 딜레마 죤에 관한 연구에서는 인지-반응 시간과 황색신호시간을 초기값으로 적용하였으나 본 연구에서는 해당 교차로의 조사치를 적용하였다. 조사 방법으로 속도조사는 스피드 건을 이용하여 각각의 대상 교차로별 접근로에서 접근 속도 및 통과 속도를 조사하였으며, 운전자의 인지-반응 시간 및 황색신호시간에 교차로를 통과하는 차량조사는 비디오 촬영을 통하여 조사하였다. 이러한 조사된 자료를 토대로 신호위반 단속기준에 맞추어 딜레마 죤에 관하여 분석하였다. 본 연구에서 딜레마 죤은 최소정지거리($d_0$)가 최대통과거리($d_c$)보다 클 때 존재하는 것으로 보았으며, 그 차이만큼의 딜레마 죤이 발생하는 것으로 정의하였다. 이에 신호위반 단속을 함에 있어딜레마 죤의 영향을 최소화 할 수 있는 방안 등을 제시하였다. 그러나 각각의 방안을 개별적으로 적용시킬 경우 문제점이 발생하였다. 이러한 문제점을 해결하기 위해서 자기감응식 루프검지기의 위치를 재조정함에 있어 하나의 루프 검지기를 정지선 이후에 존재함과 동시에 황색신호시간을 재조정하거나, 자기감응식 루프검지기의 작동시간을 재조정하는 방안을 제시하고자 하였다. 본 연구에서는 3개의 교차로를 비교대상으로 선정하여 각각의 교통환경에 따른 접근로별 딜레마죤의 범위를 최소화하기 위한 대안을 제시하였다.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.35-40
• /
• 2013

This study investigated the evacuation characteristics of student of elementary school with single unit fireproof shutter. In particular, we gathered the data about fireproof shutter and checked the data. And we made comparison and did an analysis of the evacuation characteristics of elementary school student according to working of single unit fireproof shutter for fires. As a result, it took the last occupant 130 seconds to escape from the school with no fire shutter case. But it took time 190 seconds to escape when the single unit fireproof shutter worked. Some of elementary school students could not open the door installed on the shutter when the single unit fireproof shutter worked. Considering this circumstance, it can be led to time delays of escaping when the single unit fireproof shutter work. And many students can be exposed to the fire hazards. Therefore, the study on the power to open the door installed on the shutter must be done in the future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.123-128
• /
• 2012

According to the sequence of pintle operation, the performance characteristics of pintle nozzles are analyzed. The pintle movement was simulated using unsteady numerical techniques, the response lag and sensitivity at the chamber and nozzle are estimated for movable pintle. Three operation sequences of the pintle are considered for evaluating whether the rate of the chamber pressure increase and the operation sequence will have any significant impact towards the rocket performance. Three operation sequencies are as following; the pintle moves toward the nozzle throat, it turns instantly (case 1), stops at the nozzle throat for some time(0.5sec) (case 2), and stops at the nozzle throat (case 3). As a result, the dynamic characteristics according to the operation sequence and pintle shape were analyzed to take account the rocket performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.10a
• /
• pp.29-32
• /
• 2002

• Solar Energy
• /
• v.16 no.2
• /
• pp.113-122
• /
• 1996

This study presents experimental results of heat transfer characteristics of P.C.M. during outward melting process in a vertical cylinder. The experiment was carried out in six conditions, i. e., three different inlet temperature($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$) and two directions of working fluid(upward and downward). Melting P.C.M. produced a bell-shaped phase change interface. When the inlet temperature was $7^{\circ}C$, the lower region remained at $4^{\circ}C$ until the temperature of upper region reached $4^{\circ}C$. This was due to the state of maximum density of the lower region. When the direction of the working fluid in the case of $7^{\circ}C$, inlet temperature, was upward, the rate of melting and the total melting energy were higher than when it's direction was downward. But the rate of melting and the total melting energy appeared higher value as it's direction was downward when the inlet temperature is $4^{\circ}C$ and $1^{\circ}C$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.4
• /
• pp.386-392
• /
• 2008

This paper presents active vibration control performance of a hybrid mount. The proposed hybrid mount is devised by adopting both piezostack as an active actuator and rubber as a passive element. After experimentally identifying actuating force characteristics of the piezostack and dynamic characteristics of the rubber, the hybrid mount was designed and manufactured. Subsequently, a vibration control system with a specific mass loading is constructed, and its governing equations of motion are derived. In order to actively attenuate vibration transmitted from the base, a feedforward controller is formulated and experimentally realized. Vibration control responses are then evaluated in time and frequency domains.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.356-362
• /
• 2008

This study is intended to evaluate the characteristics of smoke spreading and the appropriateness of evacuation time extended by operation of smoke control system during fire within the underground space of the building structured in compliance with the smoke control system performance criteria from the local fire safety standard in Korea. As a preceding review of this study, the combustibles was categorized and identified their heat release rates. For validate the estimated values, modeling a single underground shop was carried out. And a numerical analysis both in case of smoke control system in operation and the system not in operation was carried out of underground space. From the viewpoint of securing the evacuation time, the results were compared in an attempt to assess the appropriateness of the fire safety criteria.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.70-75
• /
• 2010

Compressed air represents an energy source and an force-transmission medium for brake systems on medium-heavy and heavy-duty commercial vehicles. However, one disadvantage is the tendency of air to absorb moisture in the form of water vapor. This water vapor condenses once the air, which is heated during compression, cools back to ambient temperature upon emerging from the air compressor. The resulting condensation assumes the form of moisture in pneumatic lines, air tanks, cylinders and valve assemblies and can have negative consequences for the brake system and vehicle safety. The pneumatic systems on today's vehicles are equipped with air dryers, in which the supplied air is dried according to the adsorption principle. In the systems, the compressed air flows through a granular desiccant with molecular sieves which captures the water molecules.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.10-15
• /
• 2011

The separation actuator for the small satellite should fix satellite appendages with high clamping force. After operation, it has to be separated from the satellite body without any damage on satellite system and release the appendages such as a solar panel and an antenna successfully. Therefore, we invent a non-explosive separation actuator for the small satellite which generates low shock and is resettable. In order to confirm performance of the proposed separation actuator, we carried out experiments for separation time, maximum preload for activation, and shock level.