• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.139-146
• /
• 2009

능동 비틀림 제어기법을 이용한 복합재료 로터 블레이드의 헬리콥터 진동억제에 대한 수치연구를 수행하였다. 허브에 작용하는 진동하중 억제를 위해 복합재료 블레이드의 탄성 연계와 함께 압전 소재의 전단변형 메커니즘을 이용하였다. 로터 블레이드는 표면에 압전 작동기를 부착한 박벽 상자형 단면을 갖는 복합재료 보로 모델링하였다. 회전익에 대한 지배 운동방정식은 Hamilton 원리를 이용하여 구성하였고, 공력하중은 자유후류모델을 포함하는 비정상 공력 이론을 이용하여 구했다. 다양한 탄성연계 적층과 능동 작동기를 부착한 복합재료 블레이드에 대해 허브진동 하중 특성을 고찰하였다. 수치해석 결과 최적 제어 알고리듬을 적용하여 $N_b$/rev 진동하중을 대폭 줄일 수 있음을 보였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.226-230
• /
• 2005

본 논문에서는 MWCNT 분산도가 증가된 새로운 전도성 형상 기억 폴리우레탄을 연구하였고 전기적 특성을 검출하기 위한 실험과 작동 성능을 측정하기 위한 실험들을 수행하였다. 전이온도 이하 범위에서의 온도변화에 따른 저항변화는 거의 없었으며, 시편이 100% 신장됨에 따라 저항값도 100% 증가하였다 (비저항 300% 증가). 작동변위는 페이로드가 증가함에 따라 선형적으로 줄어들었다. 그리고, CSMPU 작동기의 보다 세부적인 특성 및 성능을 알기 위해서는 더 많은 연구와 실험이 필요하다.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.576-584
• /
• 2006

The actuating performance test of plate-type piezoelectric composite actuators having different lay-up sequences was experimentally carried out at simply supported and fixed-free boundary conditions. The actuating displacement of manufactured plate-type piezoelectric composite actuator (PCA) was measured using a non-contact laser displacement measurement system. Our results revealed that the actuating displacement with increasing applied electric field at a drive frequency of 1Hz increased non-linearly at the simply supported boundary condition whereas it almost linearly increased at the fixed-free boundary condition. On the other hand, the actuating displacement of piezoelectric composite actuator depended on the applied electric field in a drive frequency range from 1Hz to 10Hz, but its behavior was different in higher drive frequencies beyond 15Hz due to the occurrence of resonance. On the basis of the above experimental results, the bending characteristics of PCAs revealed different behavior depending on applied electric fields, drive frequencies as well as boundary conditions. Therefore, by investigating drive frequencies together with applied electric fields, actuating performance can be easily controlled and PCAs which were fabricated for this study will be sufficiently applied to pumping devices.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.1-6
• /
• 2005

본 연구에서는 형상기억합금 작동기의 열-기계적 특성과 구조물의 응용을 살펴보았다. Lagoudas 모델을 기본으로 3-D 형상기억합금의 구성방정식을 FORTRAN으로 해석 알고리즘을 만들어 user material(UMAT) subroutine을 개발하였다. 개발된 형상기억합금 해석 UMAT subroutine을 상용 프로그램 ABAQUS와 연계 해석하여 형상기억합금 작동기와 주 구조물간의 상호 특성을 수치적으로 살펴보았다.

• 전자공학회논문지SC
• /
• 제40권1호
• /
• pp.1-10
• /
• 2003

본 논문에서는 외팔보 시스템의 능동 진동 제어를 위하여 퍼지 기법으로 동조한 PID 제어기 설계기법을 제시하였다. 직접 제작된 전자석은 작동기로 사용되었으며, 레이져 감지기가 보의 굽힘 변위를 측정하는데 사용되었다. 작동기와 감지기의 물리적 제한 때문에 실험 시스템이 비동위치(Noncollocated) 형태가 되었으며 비접촉식 제어 시스템을 이룬다 시스템의 모델링은 자유진동 방정식에 의한 모달 해석 방법으로 구하였으며 작동기로부터 감지기까지의 전달함수는 전자석 자동기차 보의 역학 방정식을 조합하여 구하였다. 일반적으로 PID 제어기는 산업 현장에서 널리 사용되고 있으나, 비선형성이 강한 시스템이나 시변 특성을 갖는 시스템에서 적절한 PID 이득값을 결정하는 것은 어렵다. 이에 본 논문에서는 자동적으로 PID 이득 값을 조절하는 퍼지 기법으로 동조한 PID 제어기를 설계하여 비선형성이 강한 전자석을 작동기로 사용하는 외팔보 시스템의 진동 제어에 적용하였다. 시뮬레이션과 실험적 결과를 통하여 설계된 제어기의 진동 감쇠 효과와 성능을 검증하였으며, PID 제어기의 경우와 비교하여 더 나은 진동 제어 성능을 가짐을 실험적 결과로부터 증명하였다.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.170-178
• /
• 2012

This paper is concerned with the development of power amplifier and controller for piezoelectric actuator and sensor used in smart structures. Even though a high-voltage power amplifier is provided in the form of an operational amplifier, a very high DC voltage is still necessary as a power supply. In this study, we propose a low-cost design for the power amplifier including the DC power supply. We also need a controller on which a control algorithm will be mounted. In general, a digital signal processing chip is popularly used because of high speed. However, only commercial product is available for smart structure applications. In this paper, a controller consisting of a DSP and electronic circuits suitable for piezoelectric sensor and actuator pair is proposed. To validate the proposed controller with power amplifier, experiment on smart structure was carried out. The experimental results show that the proposed control system can be effectively used for smart structure applications with low cost.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1165-1171
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit (IC) fabrication and surface mount technology The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.428-433
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit(IC) fabrication and surface mount technology. The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.870-879
• /
• 2007

In this study, various damage modes in bending unimorph piezoelectric composite actuators with a thin sandwiched PZT plate during bending fracture tests have been evaluated by monitoring acoustic emission (AE) signals in terms of waveform and peak frequency as well as AE parameters. Three kinds of actuator specimens consisting of woven fabric fiber skin layers and a PZT ceramic core layer are loaded with a roller and an AE activity from the specimen is monitored during the entire loading using an AE transducer mounted on the specimen. AE characteristics from a monolithic PZT ceramic with a thickness of $250{\mu}m$ are examined first in order to distinguish different AE signals from various possible damage modes in piezoelectric composite actuators. Post-failure observations and stress analyses in the respective layers of the specimens are conducted to identify particular features in the acoustic emission signal that correspond to specific types of damage modes. As a result, the signal classification based on waveform and peak frequency analyses successfully describes the failure process of the bending piezoelectric composite actuator exhibiting diverse failure mechanisms. Furthermore, it is elucidated that when the PZT ceramic embedded actuators are loaded mechanical bending loads, the failure process of actuator specimens with different lay-up configurations is almost same irrespective of their lay-up configurations.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.880-888
• /
• 2007

This article describes the load capability of bending piezoelectric actuators with a thin sandwiched PZT plate in association with the stored elastic energy induced by an increased dome height after a curing process. The stored elastic energy within the actuators is obtained via a flexural mechanical bending test. The load capability is evaluated indirectly in terms of an actuating displacement with a load of mass at simply supported and fixed-free boundary conditions. Additionally, a free displacement under no load of mass is measured for a comparison with an actuating displacement. The results reveal that an actuator with a top layer having a high elastic modulus and a low coefficient of thermal expansion exhibits a better performance than the rest of actuators in terms of free displacement as well as actuating displacement due to the formation of the large stored elastic energy within the actuator system. When actuators are excited at AC voltage, the actuating displacement is rather higher than the free displacement for the same actuating conditions. In addition, the effect of PZT ceramic softening results in a slight reduction in the resonance frequency of each actuator as the applied electric field increases. It is thus suggested that the static and dynamic actuating characteristics of bending piezoelectric composite actuators with a thin sandwiched PZT plate should be simultaneously considered in controlling the performance.