• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.198-199
• /
• 2002

연자성 재료는 투자율이 높고, 큰 포화자속 밀도를 갖는 재료로서 외부자계에 용이하게 자화되며, 그 용도를 살펴보면 전기에너지 변환, 자기기록. 변압기, 변성기, 각종 코아, 모터, 자기센서, 전ㆍ자계차폐재등 많은 전자기기에 이용되고 있다. 따라서 연자성재료는 기본적으로 결정자기이방성과 자왜가 작아야 한다. 한편 전기, 전자기의 경량화 및 고효율화를 위하여서는 포화자속밀도의 극대화, 고주파영역에서의 우수한 연자기 특성 및 저에너지 손실을 갖는 재료개발이 요구된다. (중략)

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1236-1238
• /
• 1999

This paper presents an effect of cross magnetization to the generator simplified linear model which is used for multi-machine power systems. The formulae of reactances and time constant with saturation effect are presented. The simulation results show that cross magnetization has an effect which can not be ignored, to the reactances, time constant and eigenvalues in one machine infinite bus system of simplified linear model.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1652-1654
• /
• 2000

고상반응법을 이용하여 $Ni_{0.6-x}Cu_{x}Zn_{0.4}Fe_{2}O_4$(x=0, 0.1, 0.2, 0.3) ferrite 분말을 제조하고 1200$^{\circ}C$에서 열처리하여 Cu 첨가에 따른 입자변화와 전자파흡수 특성과의 관계를 조사하였다. Ni를 Cu로 0.1 mol 치환했을 때 까지는 포화자화 및 전자파흡수능이 치환하지 않았을 때와 거의 비슷하였으나, 그 이상 첨 가시는 직선적으로 감소하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1224-1227
• /
• 1998

This paper presents an effect of cross magnetization to the generator characteristics in synchronous machine infinite bus system. Eigenvalues, synchronous torque and damping torque are investigated as the operating condition of the system is changed variously. The simulation results show that cross magnetization has an important effect to the generator characteristics in steady state stability analysis.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.68-69
• /
• 2002

Magnetic tunnel junctions은 최근 자기저항용 재료나 MRAM용 소자로 사용하기 위한 연구가 활발하게 진행되고 있다. Magnetic tunnel junction을 저자계, 저전력용 소자로 사용되기 위해서는, 작은 switching field 값과 uniform한 switching field 분포를 가져야 한다. Micromagnetic simulation을 통하여 free layer의 두께와 포화 자화 값이 감소함에 따라서 switching field가 감소함을 알 수 있었다. 본 연구에서는 얇은 free layer를 사용하여 magnetic tunnel junction을 제조하고, 얇은 free layer가 자기저항에 미치는 영향에 대하여 알아보았다. (중략)

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.224-225
• /
• 2002

강자성체의 스핀 분극을 이용하는 스핀트로닉스에 대한 연구는 매우 활발히 이루어지고 있다. CoFe 합금은 큰 포화자화와 스핀분극 때문에 스핀트로닉스 재료로 널리 이용되고 있다. 본 연구에서는 Ion Beam Etching 방법으로 CoFe 박막을 미세 가공 할 때 에칭 조건에 따른 CoFe 박막의 자기적 특성 변화를 조사하였다. 에칭 변수가 에칭에 미치는 영향을 사전에 조사하기 위하여 Cu 박막에 대하여 에칭시간, 기울임 각도, 가속 전압을 변화시키면서 식각한 후 거칠기 변화를 조사하였다. (중략)

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.45-50
• /
• 2015

The goal of this research is the create novel magnets with no rare-earth contents, with larger energy product by comparison with currently used ferrites. For this purpose we developed nano-sized hard-type/soft-type composite ferrite in which high remanent magnetization (Mr) and high coercivity (Hc). Nano-sized Ba-ferrite, Ni-Zn ferrite and $BaFe_{12}O_{19}/Ni_{0.5}Zn_{0.5}Fe_2O_4$ composite ferrites were prepared by sol-gel combustion method by use of glicine-nitrate and citric acid. Nanocomposite ferrites were calcined at temperature range $700-900^{\circ}C$ for 1h. According to the X-ray diffraction patterns and FT-IR spectra, single phase of NiZn-ferrite and Ba-ferrite were detected and hard/soft nanocomposite ferrite was indicated to the coexistence of the magnetoplumbite-structural $BaFe_{12}O_{19}$ and spinel-structural $Ni_{0.5}Zn_{0.5}Fe_2O_4$ that agreed with the standard JCPDS 10-0325 data. The particle size of nanocomposite turn out to be less than 120 nm. The nanocomposite ferrite shows a single-phase magnetization behavior, implying that the hard magnetic phase and soft magnetic phase were well exchange-coupled. The specific saturation magnetization ($M_s$) of the nanocomposite ferrite is located between hard ($BaFe_{12}O_{19}$) and soft ferrite($Ni_{0.5}Zn_{0.5}Fe_2O_4$). The remanence (Mr) of nanocomposite ferrite is much higher than that of the individual $BaFe_{12}O_{19}$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4$ ferrite, and $(BH)_{max}$ is increased slightly.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.350-356
• /
• 1998

$Y_{3-x}La_xFe_5O_{12}$ (x=0.0, 0.25, 0.5, 0.75, 1.0) powders and thin films were fabricated by a sol-gel method and their magnetic properties and crystal structure were investigated by using X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and Mossbauer spectroscopy. XRD and Mossbauer spectroscopy measurements show that garnet powders annealed at 900 $^{\circ}C$ for 8 hours were single-phased and that thin films fired at 800 $^{\circ}C$ for 2 hours were crystallized without any preferred direction. X-ray diffraction patterns of $Y_{3-x}La_xFe_5O_{12}$ powders annealed at 1000 $^{\circ}C$ had only peaks of the garnet structure in case of x$\leq$0.75 but those of $Y_2LaFe_5O_{12}$ powders consisted of peaks from garnets and $LaFeO_3$. Mossbauer sepectra of garnet powders grown by the sol-gel method had a similar shape of those of powders grown by a conventional ceramic method. Grain sizes of garnet powders were 200~300 nm and the averaged surface roughness was 3.17 nm. Results of VSM measurements show the powders and thin films had soft magnetic properties and that the garnet powders had the largest saturation magnetization, 30 emu/g, and the lowest coercivity, 52 Oe.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.49-52
• /
• 2000

The changes of magnetic properties in neutron irradiated F $e_{81}$ $B_{13.5}$S $i_{3.5}$ $C_2$ amorphous ribbon were studied by X-ray diffraction, hysteresis loop, temperature dependence of magnetization and complex permeability. The fluences of thermal ( $n_{th}$) and fast ( $n_{f}$) neutron were 6.95$\times$10$^{18}$ $n_{th}$ c $m^{-2}$ and 4.56$\times$10$^{16}$ $n_{f}$c $m^{-2}$ , respectively. The changes of XRD Profiles were not observable at the neutron irradiated sample. The complex permeability spectra showed that the permeability from domain wall motion decreased due to the increase of pinning force against domain motion by the neutron irradiation, and the relaxation frequency of rotational magnetization moved to higher frequency region. The measurement of hysteresis loop showed the increase of magnetic softness, related to rotational magnetization, but saturation magnetization was decreased in neutron irradiation sample. The Curie temperature was decreased in the neutron irradiated sample.e.e.e.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.71-78
• /
• 2002

A method of soft switching in the half bridge converter using a small saturable core is presented. For the soft switching, a small dead time of both switch off is made in a pair of MOSFET switch. The saturable core is of rectangular magnetization characteristics and the core flux swings from the minus to the plus saturation during ON time of the switch. The soft switching is realized in dead time by a resonance between the saturating inductance of the core and the stray capacitance of MOSFET. As an extension of this concept, instead of the saturable core, we propose a new soft switching circuit using a linear inductance and two switches, which is especially suitable for regulating the output and also for high frequency switching. A theoretical principle of soft switching presented here was confirmed by experiments on a half bridge converter of 1.25 KW.