• Electronics and Telecommunications Trends
• /
• v.18 no.6 s.84
• /
• pp.41-48
• /
• 2003

본 논문은 아이솔레이터의 소재 파라미터에 의한 삽입손실 영향에 대하여 서술하였다. 본 논문에서는 페리자성공명반치폭($\Delta$Η), 유전손실, 자계세기 그리고 포화자화에 대한 아이솔레이터 삽입손실의 관계를 알아 보았고, 또한 공진 아래 모드를 사용한 아이솔레이터의 온도안정화 연구 및 구조설계에 대하여알아 보았다. 아이솔레이터의 온도특성은 영구자석, YIG(Yttium Iron Garnet) 페라이트 그리고 공진기로사용되는 도체 등에 의한 변화에 대하여 본 논문에서는 실험시제품을 제작하여 측정 분석하였다. 측정결과 시뮬레이션 결과와 실험시제품 측정결과가 거의 일치하는 것을 알 수 있었다. 삽입손실 0.18~0.24dB, 반사손실 27dB, 아이솔레이션 27dB 그리고 대역폭 500MHz를 얻을 수 있었다. 이때 실험에 사용한 소재 파라미터는 포화자화 550G, 유전손실, $0.0004\Delta$Η20, 유전율 14로 하였다. 또한 온도안정화실험에서는 구조를 개선하여 온도안정화를 이루었다.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.399-408
• /
• 1998

The effect of low molecular alginates feeding on the cholesterol levels and fatty acid compositions of rat serum and liver lipid were investigated. After one week basal diet feeding, four week old Sprague-Dawley male rats were fed with water soluble and acid $\cdot$alkali soluble alginate extracted from sea mustard (Undaria pinnatifida) and giant kelp (Macrocystis pyrifera), and their low molecular alginates prepared by the HCl partial hydrolysis. The feeding efficiency of the alginate fed group was ranged in 0.37$\~$0.44, which was 0.03$\~$0.05 lower than that of the basal diet group. Also, there was much less increase of liver weight in the alginate fed group. The water soluble alginate showed more significant effect in reducing the total cholesterol, free cholesterol, LDL-cholesterol, triglyceride and phospholipid of serum and liver lipid than the acid$\cdot$alkali soluble alginate. The effect was much better with low molecular alginate (reducing effect by the low-molecularization : Water soluble alginate - serum lipid; total cholesterol $59\%$, free cholesterol $65\%$, LDL-cholesterol $96\%$, triglyceride $50\%$, and phospholipid $36\%$. liver lipid: total cholesterol $4\%$, free cholesterol $62\%$, LDL-cholesterol $44\%$, triglyceride $33\%$, and phospholipid $44\%$. acid$\cdot$alkali soluble alginate - serum lipid; total cholesterol $52\%$: free cholesterol $97\%$, LDL-cholesterol $78\%$ triglyceride $32\%$, and phospholipid $64\%$. liver lipid; total cholesterol $11\%$, free cholesterol $12\%$, LDL-cholesterol $10\%$, triglyceride $27\%$, and phospholipid $21\%$). The effect of low molecular alginate feeding on the fatty acid composition of serum and liver lipid reflects the remarkable increase of polyenoic acid, over $44\%$ in serum lipid and about $70\%$ in liver lipid, comparing to the cholesterol fed group. The overall results indicated that feeding of low molecular alginates improves physiological function of rats by changing the serum and liver lipid composition.

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.177-183
• /
• 1999

Ultrafine $CoFe_{1.9}Bi_{0.1}O_4$ particles were fabricated by using a sol-gel method and their magnetic and structural properties were investigated with an x-ray diffractometer (XRD), a vibrating sample magnetometer (VSM), and a M$\"{o}$ssbauer spectrometer. The result of x-ray diffraction and M$\"{o}$ssbauer spectroscopy showed that the powders fired at and above 523 K had only cubic spinel structures. M$\"{o}$ssbauer spectra measurements showed that the powders annealed at 523,723 and 823 K possessed ferrimagnetic nature and paramagnetic nature due to superparamagnetism, simultaneously at room temperature and the powders annealed at and above 923 K behaved ferrimagnetically. In the case of the powder annealed at 923 K, the lattice constant was $a_0=8.398$\pm$0.005{\AA}$ and the hyperfine fields were $H_{hf}(A)=479kOe,\; H_{hf}(B)=502kOe$. The isomer shifts indicate that the iron ions are ferric at tetrahedral[A] and octahedral sites [B], respectively. The magnetization as a function of annealing temperature increased as increasing annealing temperature. The largest coercivity values were $H_C=1368\;Oe$ AT 923 K annealing temperature. In the case of the powder annealed at 1123 K, the magnetization value was $M_S=75\;emu/g$ and this value was similler to that of $CoFe_2O_4$.Fe_2O_4$.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.76-80
• /
• 2014

Toroidal cores made of metallic powder requires large magnetic field strength up to few decade kA/m to obtain major hysteresis loop. To overcome thermal heat generation problem from large exciting current during measurement, we have employed a real time hysteresis loop tracer which can digitize and calculate B-H signals in personal computer as real time. For example, when we magnetize specimen at 10 Hz frequency, we could display hysteresis loops 10 times per second. Using the real time hysteresis loop tracer, we could measure major hysteresis loop of toroidal shape metallic powder core at maximum flux density or maximum magnetic field strength to be measured within 5 second not to significant increasement of specimen temperature due to the heat dissipation from coil windings. For the constructed hysteresis loop tracer, we could measure hysteresis loop at magnetic field strength higher than 50 kA/m for the toroidal shape specimen.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.495-500
• /
• 2001

Seed germination, seedling growth, plant establishment after transplanting, set of female flowers, and subsequent fruit growth were examined in cucumbers grown in soils having varying electrical conductivities (EC) of $1.0-5.0dS{\cdot}m^{-1}$ adjusted by adding different amount of a commercial compound fertilizer (N : $P_2O_5$ : $K_2O$ = 21 : 17 : 17). Slower seed germination was recorded in soils having EC value of $3.0dS{\cdot}m^{-1}$ or higher and little or no germination took place in soils with EC $4.0dS{\cdot}m^{-1}$ until 8 days after sowing. Suppression of seedling growth was apparent in soils having EC level of $2.5dS{\cdot}m^{-1}$. All seedlings died eventually at EC level of $3.5dS{\cdot}m^{-1}$. Leaf color became progressively dark green with the increase in EC from 1.0 to $3.0dS{\cdot}m^{-1}$. The first female flower was formed at higher node and the number of days required for the first flowering of female flower increased with the increase in EC values up to $3.0dS{\cdot}m^{-1}$. Occasionally, leaf yellowing and self-topping symptoms appeared in plants grown in soils having EC level of $3.0dS{\cdot}m^{-1}$.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.163-167
• /
• 2001

The rotation of uniaxial anisotropy field of 700 ${\AA}$ thick sputtered NiFe thin film due to magnetic annealing was investigated. NiFe film was annealed in a magnetic field which is perpendicular to the initial induced uniaxial anisotropy field. The NiFe film becomes nearly isotropic after 1 hour annealing at 160 $^{\circ}C$. With increase of annealing temperature over 160 $^{\circ}C$, the film gets uniaxial anisotropy field again. An abrupt increase of H$\sub$c/ was observed with annealing temperature over 400 $^{\circ}C$. The X-ray diffraction analysis and Auger electron spectroscopy with Ar ion etching showed extensive grain growth in NiFe film with (111) texturing and interdiffusion with adjacent Au electrode layer by 400 $^{\circ}C$ magnetic annealing.

• The Optical Journal
• /
• s.149
• /
• pp.45-47
• /
• 2014

한국무역협회가 지난 12월 5일 서울 삼성동 코엑스에서 '제50회 무역의 날 기념식'을 열었다. 이날 행사는 무역 유공자, 정부 및 유관기관 관계자 등 1400여명이 참석한 가운데 진행됐으며, 세계 시장 개척과 무역증진에 기여한 유공자 835명이 산업훈장 포장과 표창을 수상했고 일정 금액 이상을 수출한 1526개 기업이 수출탑을 받았다. 우리 협회 회원사에서는 세코닉스, 해성옵틱스, 디지탈옵틱, 자화전자, 방주광학, 코렌, 서울정광, 엠티엠, 챔프다이아, SMDV 등이 수출탑을 받았다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.135-137
• /
• 2010

본 논문에서는 고승압 대전력 3상 DC-DC 컨버터의 핵심부품인 3상 고주파변압기를 상용 EI코아를 이용하여 설계한 방법을 제시한다. 제안한 설계방법은 부피 및 자화인덕턴스 등 불균형 요소를 최소화하고 진동에도 우수한 구조를 갖는다. 5kW급의 시작품으로부터 제안한 컨버터의 타당성 및 성능을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1652-1654
• /
• 2000

고상반응법을 이용하여 $Ni_{0.6-x}Cu_{x}Zn_{0.4}Fe_{2}O_4$(x=0, 0.1, 0.2, 0.3) ferrite 분말을 제조하고 1200$^{\circ}C$에서 열처리하여 Cu 첨가에 따른 입자변화와 전자파흡수 특성과의 관계를 조사하였다. Ni를 Cu로 0.1 mol 치환했을 때 까지는 포화자화 및 전자파흡수능이 치환하지 않았을 때와 거의 비슷하였으나, 그 이상 첨 가시는 직선적으로 감소하였다.