• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.322-327
• /
• 2012

Parallel-plate-type scanning sensors have been commercially used for X-ray imaging sensors. In this study, we manufactured the scan typed 1D X-ray image sensor that can be used to obtain scanning images, by using the plasma display panel (PDP) fabrication process. We fabricated drift and pixel electrodes in the glass chamber and injected Xe gas at atmospheric pressure. We evaluated the intensity of a pixel signal depending on the bias voltage on the drift electrode and investigated the characteristics of shielding effect on the single pixel using lead (Pb). The adsorption rate of X-ray photon is low (4%) on the soda lime glass (1.1mm) and the electrical signal detected on the X-ray sensor was increased in the high bias voltage. We acquired digital X-ray scanning image with our DAS (data acquisition system) and sensor scanning system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.905-912
• /
• 2011

Interaocular pressure (IOP) sensor and external coil to detect the resonance frequency of the IOP sensor are designed and implemented using MEMS technology. The IOP sensor is designed using 3-D electromagnetic (EM) simulation. The resonance frequency of IOP sensor needs to be lower than that of the external coil. Additionally, the resonance frequency of the IOP sensor needs to be located near the resonance frequency of the coil to get the sufficient amplitude of phase variation. The frequency where the phase peak appears must be constant according to the distance between the IOP sensor and the external coil. From the measurement results, we demonstrated that the designed IOP sensor has the same resonance frequency with various distances between the IOP sensor and the coil.

• Composites Research
• /
• v.25 no.6
• /
• pp.211-216
• /
• 2012

FBG sensor peaks could be split due to polarization by shear strain, when the fiber optic sensors embedded or attached to the structure. For the fiber optic sensor packages, sensor grating has to be protected from shear strains. Also, pretension has to be applied to the sensor because compressive strain must be measured. Without pretension of sensor, the sensor does not show any change of signal until it is stretched. In order to mesure compressive and tensile strains, two fixing point and prestressed sensor need. In the fixing point, just holding the optical fiber cause slip between core and cladding in the fiber. A Fixation method of prestressed FBG sensors fixed with partially stripped fibers was developed. The sensor package has the prestress controllable fixtures at the fixing points. Prestress to the sensor imposed by controlling the two fixed points with bolts and nuts make it easy to measure compressive strain as well as tensile strain. The fiber optic sensor packages applied to the actual structure and the structural monitoring system using the package can be applied to safety through surveillance.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.40-49
• /
• 2006

As a promising integrated circuit, wireless communication and micro-computing technology, the technology of sensor network that will lead the information technology industries of the next generation and realize the ubiquitous computing is one of the most active research topics and its research activities are also making today. From now on, each node, the network formation, and even the sensor network itself will interact with the generic network and evolve dynamically according to environmental changes in a process of continual creation and extinction. Therefore, address-internetworking between sensor network and generic network which are used different address mechanism is required. In this paper, we propose a static address-internetworking scheme for interactive networking between a sensor network and the Internet. The proposed scheme that possess a gateway approach to perform the protocol translation from one protocol to another, an overlay approach to constructs an overlay network on the WSNs and enables static internetworking between a sensor network address scheme based on Zigbee and the Internet address scheme based on the Internet Protocol. In addition, we verify the proposed scheme by an interconnection experiment.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.135-145
• /
• 2011

These days, the research of a sensor data management system for USN based real-time monitoring application is active thanks to the development and diffusion of sensor technology. The sensor data is rapidly changeable, continuous and massive row level data. However, end user is only interested in high level data. So, it is essential to effectively process the row level data which is changeable, continuous and massive. In this paper, we propose a sensor data management system with multi-analytical query function using OLAP and anomaly detection function using learning based classifier. In the experimental section, we show that our system is valid through the some experimental scenarios. For the this, we use a sensor data generator implemented by ourselves.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.226-233
• /
• 2013

Self-diagnosis, regular examination, completion examination and precise safety examination on an elevator offer primary sources for evaluating performance and stability of the elevator. as critical examination for operating the elevator. The items on vibration of an elevator in the self-diagnosis and safety examination are not especially specified but vibration itself is considered as essential element to provide diverse analysis data. There is the equipment "EVA-625" for measuring vibration of an elevator. It is operated by reading data via computer and analyzing data by skilled engineer. This study aims to design and realize software to analyze data collected through the LabVIEW, a graphic program language and hardware for receiving data measuring vibration of an elevator by using 3-Axis acceleration sensor.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.918-931
• /
• 2013

The conventional object tracking techniques using PTZ camera detects object movements by analyzing acquired image. However, this technique requires expensive hardware devices to perform a complex image processing. And it is occasionally hard to detect object movements, if an acquired image is low quality or image acquisition is impossible. In this paper, we proposes a smart security CCTV system applying to wireless sensor network technique based on IEEE 802.15.4 standard to overcome the problems of conventional object tracking technique, which enables to track suspicious objects by detecting object movements and GPS data in sensor node. This system enables an efficient control of PTZ camera to observe a wide area, decreasing image processing complexity. Also, wireless sensor network is implemented using mesh networks to increase the efficiency of installing sensor node.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1337-1342
• /
• 2012

In recent years, many researches in Home Networking are being progressed actively. Most of techniques for Home Networking are based on wired but the technique for wireless connection is also needed. This paper focuses on wireless connection in Home Networking. Of many of wireless technologies, such as Wireless LAN, Bluetooth, or HomeRF, we especially propose to apply the new technique called Wireless Sensor Network. We present hardware and protocol stack design consideration for wireless sensor node and wireless sensor network, and then we present how to apply wireless sensor network to Home Networking and how to constitute Wireless Home-Networking with a variety of sensor nodes. Finally, we introduce the wireless sensor node system designed by us and conclude this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.167-174
• /
• 2011

This paper proposed a smart-phone based user movement state identification algorithm. Then movement state of the user is identified by calculating the location and moving speed using the GPS sensor, and detailed movement methods are identified by analyzing the data from the Orientation sensor. In this study, two sensors of the smart-phone were used to implement the user movement status identification algorithm and to perform tests. The reference values of the speed and orientation required for the identification of the movement type were defined based on the experimental data. The results of this study showed that the movement type of a smart-phone user can be identified using the user movement state identification algorithm.