• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.95-95
• /
• 2012

기존의 섬유부자재 생산은 피도물의 접점(고리자국)으로 핀홀(pine-hole)에 녹의 발생하여 제품고급화가 어렵고 작업 시 분진 발생 및 유기물질 배출로 열악한 실정이다. 국내 생산방식은 대부분 위와 같은 방식으로 생산하고 있으나 이는 불량률이 높고 열효율이 떨어지는 단점이 있다. 기존의 저가제품은 중국 및 후발국가의 추격으로 세계시장에서 경쟁력을 잃어가고 있으며 선진국의 경우 섬유부자재의 고급화를 위한 무접점 대형코팅 설비 생산 및 연구개발을 하고 있는 실정이다. 이에 본 연구에서는 무접점 코팅설비의 개발로 피도물에 접점이 없어 녹발생의 원인인 핀홀이 근본적으로 발생하지 않으며, 일괄생산체제를 도입하여 기존의 작업방법 대비 생산성이 향상되고 불량률 및 에너지사용이 감소되며, 또한 원천적으로 분진 및 유기용제 등의 유해물질 배출이 없는 기술을 확보하고자 한다. 개발된 장비의 평가 및 실제 생산현장에서 요구되는 성능을 반영하기 위해 기존 생산설비를 조사하였고, 기존 작업환경에 따른 불량률 및 생산성을 조사하였다. 새로 개발되는 무접점 코팅설비는 기존의 문제점이 보완되며, 에너지 효율 향상 및 작업환경 개선된 One-stop 공정으로 설계하였으며 그 특징은 아래와 같다. 도료 코팅을 위한 파우더 공급 및 제거 공정의 단일화로 생산성을 향상 시키면서 기존보다 분진발생이 거의 없는 도입부 개발 및 밀폐형 코팅부 도입을 통하여 불필요한 열원 낭비를 최소화 시킬 예정이다. 향후 개발된 각 단위 유닛의 최적화를 통한 생산성 향상 및 One-stop 공정에 따른 열효율 개선 및 에너지 사용 절감 효과를 알아보고 피드백하여 최종 개발품에 적용할 예정이다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.242-248
• /
• 2017

Recently, Population has been concentrated in cities due to rapid economic growth. As a result, urban buildings are becoming more dense, high-rise, and diversified. The shape of these urban buildings increases the risk of fire, accidents and crime. The narrow living space has the characteristic of the unchanged floor. In case of a fire, the living space of the narrow residence is large in the damage because the smoke diffusion rate is fast. The radio wave transmittance and transmission distance of wireless communication used in fire fighting operations vary depending on the type of building materials and buildings. Therefore, this paper analyzes the building materials and structural characteristics of the narrow residential space for efficient fire fighting operations. We have developed a communication environment solution for a narrow residential space for the optimal fire fighting operation through the measurement of the radio wave transmittance and the transmission distance of the wireless communication.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.67-72
• /
• 2016

The development of flame retardants aims to prevent the spread of fire and reduce the casualties caused by flammable and toxic gases generated during the combustion of building materials used in the interiors of multi-use facilities. Flame material application provides flame resistance to a silica sol in an organic-inorganic hybrid material by flame retardant adhesive or coating by producing a sol-gel method. The conventional flame retardant materials, non-flame retardant material is applied with Halogen freeway. In particular, the basic physical properties of conventional adhesive coating improves the heat resistance, enhances the durability fire and heat, and expands the halogen free flame retardant of building materials.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.105-109
• /
• 2014

The recent rising living standards, environment-friendly, well-being and health aspects of life in the basic gratification, as well as the desire for a pleasant environment emotionally environmentally friendly way of external space or industrial interest in the indoor environment, the manifestation. In particular, the biggest problem of the indoor environment has been emerged as a Sick House Syndrome indoor space that is provided to the building materials, and the impact on the domestic and the indoor environment, and clean the house in a health standards are specified as laws. The performance rating and the various materials to create environmentally-friendly standards for building materials. The more detail, Porous clay material, toxic substances released by applying the high humidity and the water itself, and to absorb the moisture, if the emissions, without a separate device, to maintain a comfortable indoor environment and at the same time, one of the causes of Sick House Syndrome breaking down harmful substances to absorb a comfortable indoor environment to maintain an environmentally-friendly building interior material studies. It is aimed at the development to multi-functional high performance eco-friendly construction materials, rather than through one feature performance, identify key features for national and international eco-friendly building materials can exert Water Vapour Adsorption raw, decomposed materials for the application and selection.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.133-142
• /
• 2008

AGV systems are widely used to increase the flexibility and the efficiency of the material handling systems. AGV systems are one of critical factors which determine the overall performance of the manufacturing systems. To this end, the optimal design for AGV systems is essential. Commercial simulation software is often used as an analysis tool during the design of AGV systems, however a series of procedures are desirable to simplify the analysis processes. In this paper, we present and develop the architecture for unidirectional AGV systems simulator which is able to consider approximate optimal unidirectional flow path and various operational parameters. The designed AGV systems simulator is based on JAVA, and it is developed to support designing approximate optimal unidirectional network by using Tabu search method. In addition, it enables users to design and evaluate AGV systems and to analyze alternative solutions easily. Simulation engine is consists of layout designer, AGV operation plan designer, and integrated AGVS layout designer. Users enter their system design/operation information into input window, then the entered information is automatically utilized for modeling and simulating AGV systems in simulation engine. By this series of procedures, users can get the feed back quickly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.293-296
• /
• 2001

1990년대 중반 이후 우리나라 초등학교 교실은 열린교육과 다양성을 추구하는 새로운 열린교실을 표방하고 진행되고 있다. 또한 건축설계에 있어서도 과거의 종합 표준설계에 의하지 않고 각 학교마다 별도의 건축설계에 따라 지어지고 있다. 본 논문의 목적은 현재의 초등학교 교서의 차음환경을 조사하고 새로이 지어진 교사의 교실과 열린교실의 실내 음환경을 조사하여 현재 상황을 분석평가하고 이에 대한 대안을 제시하고자 하는 것이다. 이를 위하여 건축시공연대가 다른 초등학교 3개 학교를 선택하여 단위교실에서의 실내음향인자(RT60, C80, D50, RASTI)와 인접교실과의 차음성능(TL)을 측정하였다. 또한 해당교실의 학생과 교사에 대하여 설문조사를 실시하였다. 각 측정은 외부와 복도에 인접한 창문의 개폐여부와 실내의 위치별로 이루어 졌다. 실험결과, 열린교육에 따라 가변적 교실의 구성은 기존의 교실보다 차음성능이 평균$5\sim6dB$ 낮은 것으로 나타났다. 또한 신축교사의 RASTI값(0.73)이 10년 이상 된 학교(0.70)나 열린교실(0.64)보다 높은 것으로 나타났다. 음성명료도(D50) 역시 일반 신축교사가 열린교실 보다 높게 나타났다. 이것은 실의 기밀과 내부바닥의 마감자재로 비롯되었으며 최근의 열린교실은 음의 차음과 실내명료도에서 열악한 것으로 결론되었다.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.463-469
• /
• 2010

To suggest the practical use of fast growing tree, we estimated the physical and sound absorption properties of Cherospondias axillaris which is one of the japanese fast growing species. The average annual ring width and air dry specific gravity were 8 mm and 0.55 respectively. The sound absorption coefficients of Cherospondias axillaris wood generally seemed to be a little higher than those of other construction materials such as 6 mm thick gypsum board and 18 mm thick fiberboard, and considered that it could be used as a constructing material owing to relatively good mechanical properties and sound absorption properties.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.1
• /
• pp.97-106
• /
• 2015

Gypsum board is easy to manufacture of a variety of forms and has stable mechanical properties and thermal properties. And gypsum boards are widely used to the walls and ceiling of the building as the interior building materials. The studies about technology of applying the various features in the gypsum board with additives are being actively investigated. Development methods for enhancing performance of the gypsum board using additives are largely divided into two categories. The first case is functional gypsum board that is to improve the moisture absorption and moisture-proof properties. Also studies of adsorption and decomposition of indoor air pollutants of the gypsum board using porous materials as an additive are being actively investigated. Another case is applying thermal storage materials which gives the heat storage performance to gypsum board. In this paper, we would like to introduce the various cases of gypsum board applied various additives.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.147-148
• /
• 2023

Steel doors, which are common in general buildings, do not seal the gap between the door and the floor, so drafts, noise, dust, and lights flow from the outside, and shielding devices are installed in various materials and methods, such as adding magnetic gate paper to the side of the door or installing a gasket under the door, but performance is limited. Accordingly, in order to fundamentally solve these problems, we researched and developed a double gap blocking device that can improve fire resistance and airtightness performance in steel doors. Unlike general products, the double gap blocking device has the advantage of maximizing airtight performance by forming an air layer in the center when the door is closed, as well as greatly improving the fire resistance performance, which is the basic performance of the fire door.