• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.273-279
• /
• 2015

Major diseases and insect pests in nursery season of strawberry were anthracnose, powdery mildew, Fusarium wilt, two-spotted spider mite, and aphids. Environmental-friendly and chemical application schedules can improve diseases and insect pests control with relatively fewer organic and chemical materials inputs compared with spray programs when it's occurred. Field experiments were performed in 2012 to 2013 according to calendar-based spray programs with environmental-friendly spray calendar (EFSC) and conventional chemical spray calendar (CSC) for controlling diseases and insect pests of strawberry plants cv, Seolhyang during the two nursery seasons. EFSC did reduce the incidence of diseases and insect pests as compared to the non-treated control. Incidence of anthracnose and powdery mildew by EFSC and CSC was similar in 2012 and 2013 seasons. In addition, occurrence of two-spotted spider mite in EFSC in 2013 was similar to those of CSC and was shown highly in early and mid-June both 2012 and 2013 seasons. Occurrence of aphid in EFSC was shown highly in early and mid-June both 2012 and 2013 seasons. These results suggest that EFSC program may be effective for controlling strawberry diseases and insect pests by using environmental-friendly organic materials.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.71-81
• /
• 2019

This research was conducted to improve availability of agricultural by-products, national natural resources that could be used as fertilizer source, by estimating the amount of production and collecting main contents of fertilizer substances from previous studies and data, in order to be used as basic data to investigate national resources that could be used as alternatives for imported oil-cakes in the future. Conversion factor was used to estimate annual production of agricultural by-products for main 34 crop types in 2018. For total agricultural by-products, rice straws accounted at 50.3% for the highest proportion, followed by 8.7% of rice husks, showing that by-products from rice harvest accounted at 59.0% for all by-products. Further, there were listed the contents of fertilizer substances (nitrogen, phosphoric acid, potash) in 40 types of by-products from agricultural areas. The average contents of nitrogen, phosphoric acid, and potash in agricultural by-products were 1.43%, 0.59%, and 1.90%, respectively. As a result of estimating the annual nitrogen supply amount from 26 agricultural by-products in 2018, it was found that it could supply 44,911 tons of nitrogen. The investigated by-products contained fertilizer substances such as nitrogen, phosphoric acid, and potash, but the contents were lower compared to castor oil-cake used as main component of organic fertilizer. Therefore, resource management plan needs to be established for efficient use of by-products because time, location, and nutrient content of agricultural by-product production were extremely different. Research on fertilizer and manure using agricultural by-products need to be conducted to develop and distribute alternatives for imported oil-cakes.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.107-112
• /
• 1984

Theoretical studies on the effects of forest road are considered to be significant from a present viewpoints which is headed for mordernization and activation of forestry. 1) From a viewpoint of wood production techniques, forest road is enable to economical transport of all kinds of forest products and easy transport to forest of operative tools and necessary materials, and largely contribute to efficiency of all operations, including reforestation, tending, forest protection and conservation of forests. 2) And, from a viewpoint of forest management, development of forest road makes wood marketability be secured and curtailment of various indirect expenditure with the operation efficiency be possible. 3) Forest road, also in living aspects of inhabitants in mountainous villages, plays direct and indirect roles in promoting their welfare including improvement of employment for forest labor, traffic benefits in mountainous area and introduction of culture. Therefore, as a premise to realize intensive management in forestry, the necessities of forest road were increased in its aspects of important and fundamental facilities as well as production basis.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.501-505
• /
• 2017

Due to the rapid urbanization and increased population, there is an increase in airtight nature of buildings which causes serious indoor air pollution. Among several indoor air pollutants, volatile organic compounds (VOCs) emitted from paint are of major concern. Therefore, there is an urge for the development of environmental friendly paint products. In this wok, a natural wall paint (NWP) was prepared by utilizing a natural clay material "sericite" as a main component. A small chamber test was carried out to identify the toxic substances release from NWP and the results were compared with two eco-friendly commercial paints. The total VOCs were detected in trace level inside the test chamber and their concentrations were below the recommended indoor air quality standards. Toluene was not detected for NWP, whereas formaldehyde was observed in trace level. The toxicity index results were compared with two commercial paints and found that NWP exhibited less harmful gas emission. Based on certification rating of building materials, NWP can be classified as the first grade of building materials. Due to the above advantages, the use of sericite as a major component in NWP will be a useful technique to maintain the indoor air quality.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2020

While numbers of apartment housing are continually rising in the domestic housing construction industry, apartment contractors are currently developing plane models, upgrading facilities, and relevant technology, and investing much efforts to meet the higher demands of consumers. However, the construction process of apartment housing involves the intricate properties of the construction industry such as materials, workforce, equipment, weather, and unpredictable situations. If any of these factors becomes discordant and results in interference and interruption of the construction process, then defects, both functional and aesthetic, are likely to occur due to errors in the plan of industry organizers and constructors. Therefore, this research identifies the types of defects in an apartment construction project and analyzes their relative importance. Firstly, this research reviews the previous research trends and will reduce the needs of this research. Afterward, defect repair costs corresponding to the different defect types are calculated by applying results of the research and performing frequency analysis on defect types included in 'Tenant preliminary research' on apartments constructed by Company A. As a result of analyzing the importance of defect type, the top six activities, including tile, floor, paper hanging, PL window, cabinetry, and kitchen cabinet, are found to be of high importance, and the top six activities in question need of repair and management of defects first. The results of this study will help establish a plan to initially respond to such problems as refusal to move in and filing a defect suit against delay in repairing defects.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.255-269
• /
• 2017

Five year term monitoring investigating variation of allochthonous originated gravels are has been conducted in the beach gravel deposit of the Island Dokdo natural reserve which takes purity and uniqueness with enormous attention though a number of areas. The beach gravel deposits near the dock of the Dongdo and near the accommodation facility of the Seodo comprise various types of gravels including basalt, trachyte, and tuff from the Dokdo itself, and granite, rhyolite, gneiss, quartzite, marble, and concrete from elsewhere. The types of the allochthonous gravels on the basis of the study in 2011 and in 2016 shows no difference, so is the ranking of abundance of the allochthonous gravels; granite-concrete-gneiss in turn on the Dongdo, concrete-gneiss-granite in turn on the Seodo. Nevertheless, the relative ratio of the allochthonous gravel area against the total area is decreased. While it is suspected that the disintegrated facility and the influx of material for construction are the main 2 reasons for the contamination by allochthonous gravel, diminished total contamination ratio indicate that supervising allochthonous material has been improved; at least not worse during the 5 years. On the other hand, it is inferred that gradual influence of rockfall also has been made the gravel beach changed. Therefore, consistent rockfall investigation must be inquired.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.34-39
• /
• 2010

The purpose of this study is to suggest objective evaluation model as a plan to utilize as opportunity in establishing judgment standard of mutual inspection criteria and to upgrade inspection ability by reviewing and analyzing level of danger and importance in advance based on inspection results of inspection institutions regarding tower cranes used in construction fields. Tower crane is a mechanical device transporting construction supplies and heavy materials to places over 20~150M high from the ground for the period ranging from a short time of 2~3 months to two years after being installed in construction sites in vicinity of buildings or structures and is an important facility indispensable for construction sites. However, since use period after installation is short and professional technical ability of technicians working on-site about of tower crane is poor, systematic and quantitative safety management is not carried out As a part of researches on procedure of RBI(Risk Based Inspection) possible to apply to Knowledge Based System based on knowledge and experiences of experts as well as to tower cranes for solving these problems, quantitative RPN(Risk Priority Number) was applied to RPN utilizing technique of FMEA(Failure Mode and Effect Analyses). When general RBI 80/20 Rule was applied parts with high level of risks were found out as wire rope, hoist up/down safety device, reduction gear, and etc. However, since there are still many insufficient parts as risk analyses of tower crane were not established, it is necessary for experts with sufficient experiences and knowledge to supplement active RBI techniques and continuous researches on tower cranes by sharing and setting up data base of important information with this study as a starting point.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.305-315
• /
• 2016

Due to the change from small volume production to small quantity batch production systems, individual companies have been attempting to produce a wide range of operating strategies, maximize their productivity, and minimize their WIP level by operating with the proper cycle time to defend their market share. In particular, using a complex workflow and process sequence in the manufacturing line has some drawbacks when it comes to designing the production strategy by applying analytical models, such as mathematical models and queueing theory. For this purpose, this paper uses three heuristic algorithms to solve the job release problem at the bottleneck workstation, product mix problem in multi-purpose machine(s), and batch size and sequence in batch machine(s). To verify the effectiveness of the proposed methods, a simulation analysis was performed. The experimental results demonstrated that the combined application of the proposed methods showed positive effects on the reduction of the cycle time and WIP level, and improvement of the throughput.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2005.11a
• /
• pp.475-480
• /
• 2005

인터넷상에 존재하는 수 많은 웹 페이지들에는 정형화되지 않은 각종 정보들이 이종의 형태로 산재되어 있다. 현재의 검색 기술을 통하여 필요한 정보를 찾아내는 것은 시간과 비용이 많이 소요되는 비효율적인 방법으로 이뤄지고 있다. 이러한 상황에서 사용자가 원하는 정보를 검색 및 추출해내어 정형화시키는 것은 매우 중요하다. 전자상거래의 폭발적 성장에도 불구하고 전자상거래 표준 활용 및 적용이 미비하여 e- Procurement, e-Marketplace, on-Line Shopping Mall 등에서 소비자가 원하는 상품 정보를 손쉽게 획득하지 못하고 있다. 이는 공급자에게는 보다 많은 매출의 기회를 구매자에게는 보다 좋은 자재 및 상품을 저렴한 가격에 소싱 할 수 있는 기회를 제공하지 못하는 문제점이 발생한다. 본 연구에서 제안하고자 하는 지능형 상품 에이전트는 소비자가 구매하고자 하는 특정 상품에 대한 공급자 검색 문제를 해결하기 위하여, 시스템 내부 정보의 확장 및 지식화 뿐만 아니라 웹 상의 다양한 상품 정보를 자동적으로 수집 및 가공하여 저장하는 역할을 수행한다. 이러한 연구를 위해서 사용한 기술은 우선 database 의 schema 를 읽어 들일 수 있는 DB schema reader, 인터넷 웹 페이지(웹문서)를 방문해서 다양한 정보들의 URL을 수집하는 일을 하는 Meta Search Engine 과 Focused Crawler, 그리고 다른 형태의 데이터 구조를 특정 목적에 따라 표준화된 형태로 바꾸는 Wrapper가 있다. 이러한 기술들을 연동하여 필요한 정보들을 추출 공급자 검색 문제를 해결하고자 하는 것이 연구의 목적이다. 정보추출은 사용자의 관심사에 적합한 문서들로부터 어떤 구체적인 사실이나 관계를 정확히 추출하는 작업을 가리킨다.앞으로 e-메일, 매신저, 전자결재, 지식관리시스템, 인터넷 방송 시스템의 기반 구조 역할을 할 수 있다. 현재 오픈웨어에 적용하기 위한 P2P 기반의 지능형 BPM(Business Process Management)에 관한 연구와 X인터넷 기술을 이용한 RIA (Rich Internet Application) 기반 웹인터페이스 연구를 진행하고 있다.태도와 유아의 창의성간에는 상관이 없는 것으로 나타났고, 일반 유아의 아버지 양육태도와 유아의 창의성간의 상관에서는 아버지 양육태도의 성취-비성취 요인에서와 창의성제목의 추상성요인에서 상관이 있는 것으로 나타났다. 따라서 창의성이 높은 아동의 아버지의 양육태도는 일반 유아의 아버지와 보다 더 애정적이며 자율성이 높지만 창의성이 높은 아동의 집단내에서 창의성에 특별한 영향을 더 미치는 아버지의 양육방식은 발견되지 않았다. 반면 일반 유아의 경우 아버지의 성취지향성이 낮을 때 자녀의 창의성을 향상시킬 수 있는 것으로 나타났다. 이상에서 자녀의 창의성을 향상시키는 중요한 양육차원은 애정성이나 비성취지향성으로 나타나고 있어 정서적인 측면의 지원인 것으로 밝혀졌다.징에서 나타나는 AD-SR맥락의 반성적 탐구가 자주 나타났다. 반성적 탐구 척도 두 그룹을 비교 했을 때 CON 상호작용의 특징이 낮게 나타나는 N그룹이 양적으로 그리고 내용적으로 더 의미 있는 반성적 탐구를 했다용을 지원하는 홈페이지를 만들어 자료 제공 사이트에 대한 메타 자료를 데이터베이스화했으며 이를 통해 학생들이 원하는 실시간 자료를 검색하여 찾을 수 있고 홈페이지를 방분했을 때 이해하기 어려운 그래프나 각 홈페이지가 제공하는 자료들에 대한 처리 방법을 도움말로 제공받을 수 있게 했다. 실시간 자료들을 이용한 학습은 학생들의 학습 의욕과 탐구 능력을 향상시켰으

• Journal of health informatics and statistics
• /
• v.42 no.4
• /
• pp.309-316
• /
• 2017

Objectives: Radon and its progeny pose environmental risks as a carcinogen, especially to the lungs. Investigating factors affecting indoor radon concentrations and models thereof are needed to prevent exposure to radon and to reduce indoor radon concentrations. The purpose of this study was to identify factors affecting indoor radon concentration and to construct a comprehensive model thereof. Methods: Questionnaires were administered to obtain data on residential environments, including building materials and life style. Decision tree and structural equation modeling were applied to predict residences at risk for higher radon concentrations and to develop the comprehensive model. Results: Greenery ratio, impermeable layer ratio, residence at ground level, daily ventilation, long-term heating, crack around the measuring device, and bedroom were significantly shown to be predictive factors of higher indoor radon concentrations. Daily ventilation reduced the probability of homes having indoor radon concentrations ${\geq}200Bq/m^3$ by 11.6%. Meanwhile, a greenery ratio ${\geq}65%$ without daily ventilation increased this probability by 15.3% compared to daily ventilation. The constructed model indicated greenery ratio and ventilation rate directly affecting indoor radon concentrations. Conclusions: Our model highlights the combined influences of geographical properties, groundwater, and lifestyle factors of an individual resident on indoor radon concentrations in Korea.