• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.73-79
• /
• 1996

우리나라와 같이 철도의 운행위치와 소음 피해를 받는 수음자 간의 거리가 인접되어 있는 경우, 소음의 전파특성은 과도형상을 나타내는 구간에 속하게 되어 전파중에 나타나는 지표면의 다양한 물리적, 현상과 경계면 등의 이피던스 값등이 많은 영향을 끼치게 된다. 본 연구에서는 철도소음의 소음원 자체에 대한 모델링 기법과, 자유공간을 전파할 때 나타나는 거리감쇠 효과 등을 고려한 음향학적인 연속선음원 및 유한 불연속 선음원 등에 대한 검토가 이루어졌고, 특히, 소음원의 크기에 비교하여 수음자의 위치에 따라 저감되는 음향전파특성을 설명하였다. 또한, 유한한 길이를 가지고 있는 철도차량의 소음원 모델을 이용하여 향후 국내에서 운행되리라 예상되는 고속철도의 음향파워를 산출하였다. 산출된 음향파워로부터 철도변의 소음분포를 도출하였으며 고속철도의 경우 운행시 소음피해가 어느 정도인지를 예상하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.134-139
• /
• 1993

역위상의 소음, 진동을 이용하여 원래의 소음, 진동을 제어하려는 능동제어 기법의 물리학적 기본원리는 매우 오래전부터 알려져 있었으며 특허의 형태 로 본 기술이 구체화된 것은 1934년 독일의 Lueg에 의해서였다. Lueg의 능 동제어 개념 중 단일주파수음의 제거, 자유공간에 놓여진 음원 및 복잡한 파 형에 대한 개념은 능동제어 분야에서 많은 연구의 기초가 되고 있다. 1980년 대에 들어서는 디지탈 신호처리기술의 놀라운 발전에 힘입어 계산속도의 장 벽이 제거되고 능동제어에 대한 보다 나은 모델과 방법수립이 가능해짐에 따라 소음진동제어 방법으로서 능동제어기술이 더욱 실용화되기에 이르렀으 며 최근에 들어서는 실험실에서의 연구개발 단계를 벗어나 국내외적으로 본 기술을 실제 현장에 적용하려는 실용화 노력이 여러 분양에서 진행되고 있 다. 본 고에서는 최근의 국내외 능동소음진동제어 기술 연구 개발 동향을 살 펴보고 현장적용의 문제점등을 검토함으로써 보다 효율적이고 현실적인 본 기술의 실용화 연구에 도움이 되었으면 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.37-45
• /
• 2002

A two-dimensional unsteady, inviscid flow solver has been developed for the simulation of airfoil-vortex interactions on unstructured dynamically adapted meshes. The Euler solver is based on a second-order accurate implicit time integration using a point Gauss-Seidel relaxation scheme and a dual time-step subiteration. A vertex-centered, finite-volume discretization is used in conjunction with the Roe's flux-difference splitting. An unsteady solution-adaptive dynamic mesh scheme is used by adding and deleting mesh points to take account of both spatial and temporal variations of the flow field. The effect of vortex interaction on the aeroelastic displacement of an airfoil attached to the idealized two degree-of-freedom spring system is investigated.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.42-42
• /
• 2015

사행수로에서의 원심력은 비선형적인 압력분포를 야기하여 이차류, 편수위 등과 같은 불규칙하고 복잡한 흐름을 발생시킨다. 일반적으로 이들 흐름은 난류이고 매우 3차원적이며 자유수면과의 상호작용이 중요한 역할을 할 수도 있다. 환경, 유사이동, 지형 변화와 관련된 환경 수리학적 관점에서 사행수로에서의 흐름을 이해하고 설계하기 위해서는 이러한 복잡한 3차원 흐름을 정확하게 계산하는 것이 매우 중요하다. 이 연구에서는 유한차분법에 근거한 3차원 흐름해석 모형을 이용하여 사행수로에서의 난류 흐름을 모의하고자 한다. 지배방정식은 3차원 비정상 RANS(Reynolds averaged Navier-Stokes) 방정식이며, 난류 해석을 위해서 공학적으로 널리 이용되고 있는 난류 모형 중 k-omega 모형을 이용한다. 수치모형은 시간과 공간에 대해서 2차 정확도의 이산화 기법을 적용한다. 자유수면의 변동은 이상(two-phase) VOF (volume of fluid) 기법을 이용하여 계산한다. 수치모형의 적용 대상은 기존 문헌에서 제시되어 있는 키노시타 사인곡선을 이용하여 만든 폭 60cm의 사행수로에서 후르드수 0.23 그리고 레이놀즈수 41,700의 조건에서 발생시킨 난류 흐름이다. 적용한 난류모형들을 이용하여 해석한 결과들을 유속벡터분포와 수위의 항으로 비교분석하여 사행수로에서 발생되는 이차류와 편수위 변화 재현에 대한 수치모형의 적용성을 평가하고 각 난류모형들의 특성을 제시한다.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.6
• /
• pp.113-122
• /
• 2019

In the 1970s, under the tyrannical regulation and censorship of the Yushin regime, realistic dramatization techniques were forced to reveal their limitations. Choosing the 'allegory' technique, a double-meaning narrative structure, Lee Kang-baek sets up virtual spaces or unrealistic figures, both of which lack 'realism'. Lee Kang-baek has allergic the illusion of detadiscourse, the diaspora character, and the universality of 'Political Unconsciousness'. So it's linked to the perception of history in the 1960s. This creates a semantic network of public and casual perception of history. This was a 'bypass' strategy which more clearly disclose the violent politics. Therefore Lee Kang-baek's play shows the desperate situation of the diaspora character being oppressed by detadiscourse, and the desire of the author who can never give up on freedom of expression, though under that oppression. Furthermore, it was an attempt to acquire a timeless universality and symbolism about human freedom and liberation through the Allegory play technique.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.1
• /
• pp.77-86
• /
• 2002

This paper proposes a modified Duvall beamformer performing spatial smoothing with spatial interpolation. In the proposed beamformer, virtual array signals are generated by spatial interpolation between each neighbor array elements, then all signals are used to perform spatial smoothing. The proposed beamformer overcomes the loss of degrees of freedom caused by spatial smoothing by forming subarrays with interpolated signals. Mathematical description shows that the proposed beamformer can restore the rank of away covariance matrix. Accordingly, the proposed beamformer can minimize the loss of degrees of freedom. Simulation results show that the proposed beamformer can remove all coherent interferences while conventional beamformers cannot.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.87-94
• /
• 2019

Recently, the advance of accurate dynamic displacement measurement devices, such as GPS, computer vision, and optic laser sensor, has enhanced the structural monitoring technology. In this study, the dynamic displacement data was used to verify the applicability of the structural physical parameter estimation method through subspace system identification. The subspace system identification theory for estimating state-space model from measured data and physics-based interpretation for deriving the physical parameter of the estimated system are presented. Three-degree-freedom steel structures were fabricated for the experimental verification of the theory in this study. Laser displacement sensor and accelerometer were used to measure the displacement data of each floor and the acceleration data of the shaking table. Discrete state-space model generated from measured data was verified for precision. The discrete state-space model generated from the measured data extracted the floor stiffness of the building after accuracy verification. In addition, based on the story stiffness extracted from the state space model, five column stiffening and damage samples were set up to extract the change rate of story stiffness for each sample. As a result, in case of reinforcement and damage under the same condition, the stiffness change showed a high matching rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.291-298
• /
• 2017

In this paper, we derive the achievable degrees of freedom (DoF) for multiple-input multiple-output (MIMO) Z-interference channels (Z-IC) with reconfigurable antennas at the receivers, assuming that channel state information is not available at the transmitters. We propose a new linear scheme to align interfering signals and to decode desired signals through the designed preset mode switching pattern of reconfigurable antennas at the receivers. The key idea of our scheme is to use interfering signals as a side information at the interfered receiver by being silent at the corresponding transmitter during some time slots. Consequently, it is shown that the reconfigurable antennas at the receivers can bring a DoF gain if the number of preset modes is greater than the number of RF chains at the receivers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.213-219
• /
• 2013

Recently, with the rapid advancement in information and communication technology, indoor location-based services(LBSs) that require precise position tracking have been actively studied with outdoor-LBS using GPS. However, in case of a ship which consists of steel structure, it is difficult to measure a precise localization due to significant ranging error by the diffraction and refraction of radio waves. In order to reduce location measurement errors that occur in these indoor environments, this paper presents distance compensation algorithms that are suitable for a narrow passage such as ship corridors without any additional sensors by using UWB(Ultra-wide-band), which is robust to multi-path and has an error in the range of a few centimeters in free space. These improvement methods are that Pythagorean theory and adjacent node technique are used to solve the distance error due to the node deployment and distance variation analysis technique is applied to reduce the ranging errors which are significantly fluctuated in the corner section. The experimental results show that the number of nodes and the distance error are reduced to 66% and 57.41%, respectively, compared with conventional CSS(Chirp spread spectrum) method.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.692-705
• /
• 2018

Ground vibration is one of the remarkable issues in tunnel blasting. In recent studies, to improve the fragmentation with reduction of ground vibration in tunnel blasting, a vibration-controlled blasting method with artificial cutting slot near the center-cut holes has been suggested. This study examines the effect of the different arrangement of artificial cut-slot on the vibration reduction and fragmentation by performing the full-scaled concrete block blast experiments and the numerical simulations with 3D-DFPA. The results show that the existence of artificial slot contributes to the improvement of vibration reduction, blast fragmentation and the efficiency of the cutting slot blast. It can be explained that the artificial slot play a free surface role and should decrease the burden between the cut holes. Crater volumes of the blasted concrete blocks were measured by 3-dimensional digital image analysis and compared with the ideal standard crater volume which can be calculated by theoretical standard blast design method. As a result, the ratio of burden and hole diameter which should achieve the standard crater in the cut-hole blasting were suggested.