• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.

• Journal of Food Hygiene and Safety
• /
• v.13 no.2
• /
• pp.112-120
• /
• 1998

This study was performed to investigate the synergistic effect of chitosan and sorbic acid as a new food preservative. So it was performed to investigate inhibitory effect on growh of E. coli 0157:H7, gram negative pathogenic food borne disease bacteria and of S. aureus, gram positive food borne disease bacteria in chitosan, sorbic acid and combination of chitosan and sorbic acid. Minimun Inhibitory Concentration (MIC) of chitosan in E. coli 0157:H7 was 500 ppm at pH 5.0, 250 ppm at pH 5.5, 500 ppm at pH 6.0, and 2000 ppm at pH 6.5, while in Staph. aureus 31.25 ppm at pH 5.0 and 62. 5 ppm at more than pH 5.5. also, MIC of sorbic acid in E. coli 0157:H7 was 500 ppm at pH 5.0, 1500 ppm at pH 5.5, and 2000 ppm at more than pH 6.0, while in Staph. aureus 1500 ppm at pH 5.0 and more than 2000 ppm at more than pH 5.5. Due to the effect of pH in E. coli 0157:H7, MIC of combined chitosan and sorbic acid was 500 ppm of chitosan with 500 ppm of sorbic acid at pH 6.5, but 250 ppm of chitosan with 31.3 ppm of sorbic acid at pH 5.0. In Staph. aureus, there was great effect of chitosan, but neither effect of pH nor sorbic acid. When E. coli 0157:H7 were treated with 500 ppm of chitosan with 500 ppm of sorbic acid and 250 ppm of chitosan with 250 ppm of sorbic acid at pH 6.5, they were inhibited. But, they were increased at the initial concentration of bacteria at 1000 ppm of chitosan in 18 hours, at 500 ppm of chitosan in 36 hours. There was no effect of growth inhibition with sorbic acid but great effect with chitosan on Staph. aureus. The correl~tions between MICs of chitosan and sorbic acid in E. coli 0157:H7 accoding to pH were higher than those in Staph. aureus. R values in E. coli 0157:H7 were 0.95 (p<0.01), 0.99 (p<0.01), 0.97 (p<0.01), and 0.99 (p<0.01) at pH 6.5, 6.0, 5.5, and 5.0 respectively. The synergistic effect of chitosan and sorbic acid in E. coli 0157:H7 could be confirmed from the result of this experiment. Therefore, it was expected that the food preservation would increase or maintain by using sorble acid together with chitosan, natural food additive that did no harm to human body.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1293-1299
• /
• 2007

This study was performed to assess the nutritional status of the elderly residing in a silver town. A survey was conducted in April, 2005 for fifty two healthy persons (men 18, women 34) aged over 65 years living in a private silver town of Busan Metropolitan City, Korea. General data were collected using questionnaires at homes of the subjects and food consumption data for 3 days were obtained by investigating the individual leftovers from the meals served at the foodservice facilities by well-trained graduate students of the Department of Food & Nutrition. Nutrient intake was calculated from food consumption data using Can Pro (version 3.0, Korea). Average daily intake of energy was 1077.6 kcal in men and 974.2 kcal in women. Average protein intake of the men and women amounted to 85.5 g and 67.7 g, respectively. The consumption of cereals contributed 45.3% of energy intake for all subjects. Only 1.1% of calcium intake was from milk and milk products. Almost 100% of the elderly did not reach 75% of estimated energy requirement (EER) in energy intake and 75% of estimated average requirement (EAR) in folic acid intake. Percentages of the subjects who consumed protein above 125% of EAR were 100% and 91% in men and women, respectively. All subjects consumed above EAR in dietary intake of protein and iron. These data suggest that nutrient intake of the elderly living in the silver town would be inadequate, and thus the efficient management of foodservice is necessary to improve the nutritional status of the elderly living in the silver town.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.273-288
• /
• 2023

The Gubong Au-Ag deposit, which has been one of the largest deposits (Unsan, Daeyudong, Kwangyang) in Korea, consists of eight lens-shaped quartz veins (a mix of orogenic-type and intrusion-related types) that filled fractures along fault zones within Precambrian metasedimentary rock. Korea Mining Promotion Corporation found a quartz vein (referred to as the No. 6 vein with a grade of 27.9 g/t Au and a width of 0.9 m) at a depth of -728 ML by drilling (No. 90-12) conducted in 1989. Korea Mining Promotion Corporation conducted drilling (No. 04-1) in 2004 to investigate the redevelopment's possibility of the No. 6 vein. The author studied the occurrence and chemical composition of chlorite and white mica using wallrock, wallrock alteration and quartz vein samples collected from the No. 04-1 drilling core in 2004. The alteration of studied samples occurs chloritization, sericitization, silicification and pyritization. Chlorite and white mica from mineralized zone at a depth of -275 ML occur with quartz, K-feldspar, calcite, rutile and pyrite in wallrock alteration zone and quartz vein. Chlorite and white mica from ore vein (No. 6 vein) at a depth of -779 ML occur with quartz, calcite, apatite, zircon, rutile, ilmenite, pyrrhotite and pyrite in wallrock alteration zone and quartz vein. Chlorite from a depth of -779 ML has a higher content of Al and Mg elements and a lower content of Si and Fe elements than chlorite from a depth of -275 ML. Also, Chlorites from a depth of -275 ML and -779 ML have higher content of Si element than theoretical chlorite. Compositional variation in chlorite from a depth of -275 ML was mainly caused by phengitic or Tschermark substitution [Al^{3+,VI + Al3+,IV} <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV], but compositional variation from a depth of -779 ML was mainly caused by octahedral Fe²⁺ <-> Mg²⁺ (Mn²⁺) substitution. The interlayer cation site occupancy (K+Na+Ca+Ba+Sr = 0.76~0.82 apfu, 0.72~0.91 apfu) of white mica from a depth of -275 ML and -779 ML have lower contents than theoretical dioctahedral micas, but octahedral site occupancy (Fe+Mg+Mn+Ti+Cr+V+Ni = 2.09~2.13 apfu, 2.06~2.14 apfu) have higher contents than theoretical dioctahedral micas. Compositional variation in white mica from a depth of -275 ML was caused by phengitic or Tschermark substitution [(Al³⁺)^VI + (Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV], illitic substitution and direct (Fe³⁺)^VI <-> (Al³⁺)^VI substitution. But, compositional variation in white mica from a depth of -779 ML was caused by phengitic or Tschermark substitution [(Al³⁺)^VI + (Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI + (Si⁴⁺)^IV] and direct (Fe³⁺)^VI <-> (Al³⁺)^VI substitution.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.205-225
• /
• 2018

Convolutional Neural Network (ConvNet) is one class of the powerful Deep Neural Network that can analyze and learn hierarchies of visual features. Originally, first neural network (Neocognitron) was introduced in the 80s. At that time, the neural network was not broadly used in both industry and academic field by cause of large-scale dataset shortage and low computational power. However, after a few decades later in 2012, Krizhevsky made a breakthrough on ILSVRC-12 visual recognition competition using Convolutional Neural Network. That breakthrough revived people interest in the neural network. The success of Convolutional Neural Network is achieved with two main factors. First of them is the emergence of advanced hardware (GPUs) for sufficient parallel computation. Second is the availability of large-scale datasets such as ImageNet (ILSVRC) dataset for training. Unfortunately, many new domains are bottlenecked by these factors. For most domains, it is difficult and requires lots of effort to gather large-scale dataset to train a ConvNet. Moreover, even if we have a large-scale dataset, training ConvNet from scratch is required expensive resource and time-consuming. These two obstacles can be solved by using transfer learning. Transfer learning is a method for transferring the knowledge from a source domain to new domain. There are two major Transfer learning cases. First one is ConvNet as fixed feature extractor, and the second one is Fine-tune the ConvNet on a new dataset. In the first case, using pre-trained ConvNet (such as on ImageNet) to compute feed-forward activations of the image into the ConvNet and extract activation features from specific layers. In the second case, replacing and retraining the ConvNet classifier on the new dataset, then fine-tune the weights of the pre-trained network with the backpropagation. In this paper, we focus on using multiple ConvNet layers as a fixed feature extractor only. However, applying features with high dimensional complexity that is directly extracted from multiple ConvNet layers is still a challenging problem. We observe that features extracted from multiple ConvNet layers address the different characteristics of the image which means better representation could be obtained by finding the optimal combination of multiple ConvNet layers. Based on that observation, we propose to employ multiple ConvNet layer representations for transfer learning instead of a single ConvNet layer representation. Overall, our primary pipeline has three steps. Firstly, images from target task are given as input to ConvNet, then that image will be feed-forwarded into pre-trained AlexNet, and the activation features from three fully connected convolutional layers are extracted. Secondly, activation features of three ConvNet layers are concatenated to obtain multiple ConvNet layers representation because it will gain more information about an image. When three fully connected layer features concatenated, the occurring image representation would have 9192 (4096+4096+1000) dimension features. However, features extracted from multiple ConvNet layers are redundant and noisy since they are extracted from the same ConvNet. Thus, a third step, we will use Principal Component Analysis (PCA) to select salient features before the training phase. When salient features are obtained, the classifier can classify image more accurately, and the performance of transfer learning can be improved. To evaluate proposed method, experiments are conducted in three standard datasets (Caltech-256, VOC07, and SUN397) to compare multiple ConvNet layer representations against single ConvNet layer representation by using PCA for feature selection and dimension reduction. Our experiments demonstrated the importance of feature selection for multiple ConvNet layer representation. Moreover, our proposed approach achieved 75.6% accuracy compared to 73.9% accuracy achieved by FC7 layer on the Caltech-256 dataset, 73.1% accuracy compared to 69.2% accuracy achieved by FC8 layer on the VOC07 dataset, 52.2% accuracy compared to 48.7% accuracy achieved by FC7 layer on the SUN397 dataset. We also showed that our proposed approach achieved superior performance, 2.8%, 2.1% and 3.1% accuracy improvement on Caltech-256, VOC07, and SUN397 dataset respectively compare to existing work.

• The Korean Journal of Petroleum Geology
• /
• v.8 no.1_2 s.9
• /
• pp.1-43
• /
• 2000

A comparison study for understanding a stratigraphic response to tectonic evolution of sedimentary basins in the Yellow Sea and adjacent areas was carried out by using an integrated stratigraphic technology. As an interim result, we propose a stratigraphic framework that allows temporal and spatial correlation of the sedimentary successions in the basins. This stratigraphic framework will use as a new stratigraphic paradigm for hydrocarbon exploration in the Yellow Sea and adjacent areas. Integrated stratigraphic analysis in conjunction with sequence-keyed biostratigraphy allows us to define nine stratigraphic units in the basins: Cambro-Ordovician, Carboniferous-Triassic, early to middle Jurassic, late Jurassic-early Cretaceous, late Cretaceous, Paleocene-Eocene, Oligocene, early Miocene, and middle Miocene-Pliocene. They are tectono-stratigraphic units that provide time-sliced information on basin-forming tectonics, sedimentation, and basin-modifying tectonics of sedimentary basins in the Yellow Sea and adjacent area. In the Paleozoic, the South Yellow Sea basin was initiated as a marginal sag basin in the northern margin of the South China Block. Siliciclastic and carbonate sediments were deposited in the basin, showing cyclic fashions due to relative sea-level fluctuations. During the Devonian, however, the basin was once uplifted and deformed due to the Caledonian Orogeny, which resulted in an unconformity between the Cambro-Ordovician and the Carboniferous-Triassic units. The second orogenic event, Indosinian Orogeny, occurred in the late Permian-late Triassic, when the North China block began to collide with the South China block. Collision of the North and South China blocks produced the Qinling-Dabie-Sulu-Imjin foldbelts and led to the uplift and deformation of the Paleozoic strata. Subsequent rapid subsidence of the foreland parallel to the foldbelts formed the Bohai and the West Korean Bay basins where infilled with the early to middle Jurassic molasse sediments. Also Piggyback basins locally developed along the thrust. The later intensive Yanshanian (first) Orogeny modified these foreland and Piggyback basins in the late Jurassic. The South Yellow Sea basin, however, was likely to be a continental interior sag basin during the early to middle Jurassic. The early to middle Jurassic unit in the South Yellow Sea basin is characterized by fluvial to lacustrine sandstone and shale with a thick basal quartz conglomerate that contains well-sorted and well-rounded gravels. Meanwhile, the Tan-Lu fault system underwent a sinistrai strike-slip wrench movement in the late Triassic and continued into the Jurassic and Cretaceous until the early Tertiary. In the late Jurassic, development of second- or third-order wrench faults along the Tan-Lu fault system probably initiated a series of small-scale strike-slip extensional basins. Continued sinistral movement of the Tan-Lu fault until the late Eocene caused a megashear in the South Yellow Sea basin, forming a large-scale pull-apart basin. However, the Bohai basin was uplifted and severely modified during this period. h pronounced Yanshanian Orogeny (second and third) was marked by the unconformity between the early Cretaceous and late Eocene in the Bohai basin. In the late Eocene, the Indian Plate began to collide with the Eurasian Plate, forming a megasuture zone. This orogenic event, namely the Himalayan Orogeny, was probably responsible for the change of motion of the Tan-Lu fault system from left-lateral to right-lateral. The right-lateral strike-slip movement of the Tan-Lu fault caused the tectonic inversion of the South Yellow Sea basin and the pull-apart opening of the Bohai basin. Thus, the Oligocene was the main period of sedimentation in the Bohai basin as well as severe tectonic modification of the South Yellow Sea basin. After the Oligocene, the Yellow Sea and Bohai basins have maintained thermal subsidence up to the present with short periods of marine transgressions extending into the land part of the present basins.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.3-30
• /
• 2011

According to the Article 86 of the United Nations on the Law of the Sea(UNCLOS) the provisions of high seas apply to all parts of the sea that are not included in the exclusive economic zone, in the territorial sea or in the internal waters of a State, or in the archipelagic waters of an archipelagic State. Article 87 also stipulates the freedom of the high seas. International laws on the flight over the high seas are found as follows; Firstly, as far as the nationality of the aircraft is concerned, its legal status is quite different from the ship where the flags of convenience can be applied practically. There is no flags of convenience of the aircraft. Secondly, according to the Article 95 of UNCLOS warships on the high seas have complete immunity from the jurisdiction of any State other than the flag State. We can suppose that the military(or state) aircraft over the high seas have also complete immunity from the jurisdiction of any State other than the flag State. Thirdly, according to the Article 101 of UNCLOS piracy consists of any act of voluntary participation in the operation of a ship or of an aircraft with knowledge of facts making it a pirate ship or aircraft. We can conclude that piracy can de done by a pirate aircraft as well as a pirate ship. Fourthly, according to the Article 111 (5) of UNCLOS the right of hot pursuit may be exercised only by warships or military aircraft, or other ships or aircraft clearly marked and identifiable as being on government service and authorized to that effect. We can conclude that the right of hot pursuit may be exercised only military aircraft, or aircraft clearly marked and identifiable as being on government service and authorized to that effect. Fifthly, according to the Article 110 of UNCLOS a warship which encounters on the high seas a foreign ship, is not justified in boarding it unless there is reasonable ground for suspecting that: (a) the ship is engaged in piracy, (b) the ship is engaged in the slave trade, (c) the ship is engaged in an authorized broadcasting and the flag State of the warship has jurisdiction under article 109, (d) the ship is without nationality, or (e) though flying a foreign flag or refusing to show its flag, the ship is, in reality, of the same nationality as the warship. These provisions apply mutatis mutandis to military aircraft. Sixthly, according to the Article 1 (5)(dumping), 212(pollution from or through the atmosphere), 222(enforcement with respect to pollution from or through the atmosphere) of UNCLOS aircraft as well as ship is very much related to marine pollution. Seventhly, as far as the crime on board aircraft over the high seas is concerned 1963 Convention on the Offences and Certain Other Acts Committed on Board Aircraft(Tokyo Convention) will be applied, and as for the hijacking over the high seas 1970 Convention for the Suppression of Unlawful Seizure of Aircraft(Hague Convention) and as for the sabotage over the high seas 1971 Convention for the Suppression of Unlawful Acts Against the Safety of Civil Aviation(Montreal Convention) will be applied respectively. These three conventions recognize the flag state jurisdiction over the crimes on board aircraft over the high seas. Eightly, as far as reconnaissance by foreign aircraft in the high seas toward the coastal States is concerned it is not illegal in terms of international law because its act is done in the high seas. Ninthly as for Air Defence Identification Zone(ADIZ) there are no articles dealing with it in the 1944 Chicago Convention. The legal status of the foreign aircraft over this sea zone might be restricted to the regulations of the coastal states whether this zone is legitimate or illegal. Lastly, the Arctic Sea is the frozen ocean. So the flight over that ocean is the same over the high seas. Because of the climate change the Arctic Sea is getting melted. If the coastal states of the Arctic Sea will proclaim the Exclusive Economic Zone(EEZ) as the ocean is getting melted, the freedom of flight over that ocean will also be restricted to the regulations of the coastal states.

• Journal of Korean Society of Forest Science
• /
• v.20 no.1
• /
• pp.1-44
• /
• 1973

Needless to say, the management of national forest in all countries is very important in view of the national mission and management purposes. Korean national forest is also in particular significant in promoting national economy for the continuous increasing of the demand for wood, conservation of the land and social welfare. But there's no denying the fact that the leading aim of the Korean forest policy has been based upon the conservation of forest resources and recovery of land conservation function instead of improvement of the forest productive capacity. Therefore, the management of national forest should be aimed as an industry in the chain of the Korean national economy. And the increment of the forest productive capacity based on rationalized forest management is also urgently needed. Not only the increment of the timber production but also the establishment of the good forest in quality and quantity are to bring naturally many functions of conservation and other public benefits. In 1908 Korean national forest was historically established for the first time as a result of the notification for ownership, and was divided into two kinds in 1911-1924, such as indisposable national forest for land conservation, forest management, scientific research and public welfare, and the other national forest to be disposed. Indisposable forest is mostly under the jurisdiction of national forest stations (Chungbu, Tongbu, Nambu), and the tother national forests are under custody of respective cities and provinces, and under custody of the other government authorities. As of the end of 1971, national forest land is 19.5% (1,297,708 ha) of the total forest land area, but growing stock is 50.1% ($35,406,079m^3$) of the total forest growing stock, and timber production of national forest is 23.6% ($205,959m^3$) of the year production of total timber in Korea. Accordingly, it is the important fact that national forest occupies the major part of Korean forestry. The author positively affirms that success or failure of the management of national forest controls rise or fall of forestry in Korea. All functions of forest are very important, but among others the function of timber production is most important especially in Korea, that unavoidably imports a large quantity of foreign wood every year (in 1971 import of foreign wood-$3,756,000m^3$, 160,995,000 dollars). So, Korea urgently needs the improvement of forest productive capacity in national forest. But it is difficult that wood production meets the rapid increase of demand for wood to the development of economy, because production term of forestry is long, so national forest management should be rationalized by the effective investment and development of forestry techniques in the long view. Although Korean national forest business has many difficulties in the budget, techniques and the lack of labour due to outflow of rural village labour by development of national economy, and the increase of labour wages and administrative expenses etc. the development of national forest depends on adoption of the suitable forest techniques and management adapted for social and economical development. In this view point the writer has investigated and analyzed the status of the management of national forest in Korea to examine the irrational problems and suggest an improvement plan. The national forestry statistics cited in this study is based on the basic statistics and the statistics of the forest business as of the end of 1971 published by Office of Forestry, Republic of Korea, and the other depended on the data presented by the national forest stations. The writer wants to propose as follows (seemed to be helpful in improvement of Korean national forest management). 1) In the organization of national forest management, more national forest stations should be established to manage intensively, and the staff of working plan officials should be strengthened because of the importance of working plan. 2) By increasing the staff of protection officials, forest area assigned for each protection official should be decreased to 1,000-2,000 ha. 3) The frequent personnel changes of supervisor of national forest station(the responsible person on-the-spot) obstructs to accomplish the consistent management plan. 4) In the working plan drafting for national forest, basic investigations should be carefully practiced with sufficient expenditure and staff not to draft unreal working plan. 5) The area of working-unit should be decreased to less than 2,000 ha on the average for intensive management and the principle of a working-unit in a forest station should be realized as soon as possible. 6) Reforestation on open land should be completed in a short time with a debt of the special fund(a long term loan), and the land on which growing hardwood stands should be changed with conifers to increase productivity per unit area, and at the same time techical utilization method of hardwood should be developed. 7) Expenses of reforestation should be saved by mechanization and use of chemicals for reforestation and tree nursery operation providing against the lack of labour in future. 8) In forest protection, forest fire damage is enormous in comparison with foreign countries, accordingly prevention system and equipment should be improved, and also the minimum necessary budget should be counted up for establishment and manintenance of fire-lines. 9) Manufacture production should be enlarged to systematize protection, processing and circulation of forest business, and, by doing this, mich benefit is naturally given for rural people. 10) Establishment and arrangement of forest road networks and erosion control work are indispensable for the future development of national forest itself and local development. Therefore, these works should be promoted by the responsibility of general accounting instead of special accounting. 11) Mechanization of forest works should be realized for exploiting hinterlands to meet the demand for timber increased and for solving lack of labour, consequently it should promote import of forest machines, home production, training for operaters and careful adminitration. 12) Situation of labour in future will grow worse. Therefore, the countermeasure to maintain forest labourers and pay attention to public welfare facilities and works should be considered. 13) Although the condition of income and expenditure grows worse because of economical change, the regular expenditure should be fixed. So part of the surplus fund, as of the end of 1971, should be established for the fund, and used for enlarging reforestation and forest road networks(preceding investment in national forest).