• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.87-93
• /
• 2019

Recently, the number of passengers using airplanes is rapidly increasing due to the increase of overseas travelers. Therefore, the probability of exposure to natural radiation due to altitude is increasing due to the increase in flight time. Cosmic-ray penetrates the Earth's magnetic field belt Van Allen, which is located at an altitude of 400 km to 1200 km. Most cosmic rays are blocked at Van Allen belt. However, cosmic-ray could be not completely blocked, and a small amount of cosmic-ray affects the earth. In general, if the altitude was increased by 100m, the natural exposure dose increased by 0.03 mSv on the Earth. In this study, I tried to minimize the exposure to natural radiation in airplanes when boarding airplanes. Especially, I was aimed to minimize radiation exposure by protecting the highly sensitive thyroid gland among human organs. According to the results of the study, the designed shielding handkerchief was able to shield cosmic natural radiation dose by more than 70%. In conclusion, the application of the shielding handkerchief made in this study can be effectively shield natural radiation.

• Korean Journal of Environment and Ecology
• /
• v.16 no.3
• /
• pp.321-337
• /
• 2002

This study was carried out to draw up the planting plan of bridge type ecological corridor for animals migration at Hakgogae(ridge) destroyed by road construction in Yongin, Gyeonggi-do, South Korea. It was conducted with two steps, survey and planting master plan. We surveyed the structure of topography, plant community, and animal habitat. We also selected the target species migrate ecological corridor and suggested a concept of each planting area, the planting species, and the planting density based on the analyzed data and finally drew up the planting plan. The structure of topography was a steep slope due to the mountain ridge destruction so the bridge type ecological corridor was could be applied in this study and we supposed that the animals migrate along the both edge of corridor. As the results of analyzed plant community structure in two sides, the dominant woody species, Quercus serrata and Q. variabilis were distributed on the bottom and the belly of a mountain, while Pinus densiflora community was distributed on the mountain ridge as edaphic climax. The similarity between Q. serrata -Q. mongolica -Q. variabilis community on the West of survey site and Q. serrata -Q. mongolica community on the East of survey site was high in 71.0 percentages. As the results of surveying birds and some mammalia, seven species and fifty-seven individuals of birds were founded in survey area, and two species and two individuals of rodents were founded. We selected birds and some mammals for the migration species that supposed to migrate ecological corridor in drawing up the planting plan. And then we divided the planting areas into bird corridor and habitat, and mammals corridor, also suggested the planting areas in detail as follows: community planting area of shrub at slope adjacent to the bridge exit as a buffer zone, screen planting area, community planting area of herb at steep slope connected with mountain areas, inducement planting area of the animals, community planting area for bird migration, community planting area for mammals migration, and community planting area for bird habitat. We selected the planting woody species which were the constancy ratio based on the analyzed data of plant community around mountain areas was high, and suggested the planting master plan each space.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.305-315
• /
• 2020

For geological disposal of radioactive wastes, a method was proposed to evaluate the radionuclide transport in the biosphere by calculating the elapsed time of nuclide migration. The radionuclides were supposed to be introduced from a natural barrier and reached a large surface water body following a groundwater flow in a shallow subsurface. The biosphere was defined as a shallow subsurface environment that included aquifers on a host rock. Using the proposed method, a calculation algorithm was established, and a computer code that implemented the algorithm was developed. The developed code was verified by comparing the simulation results of the simple cases with the results of the analytical solution and a public program, which has been widely used to evaluate the radiation dose using the radionuclide transport near the surface. A case study was constructed using the previous research for radionuclide transport from the hypothetical geological disposal repository. In the case study, the code calculated the mass discharge rate of radionuclide to a stream in the biosphere. Because the previous research only demonstrated the transport of radionuclides from the hypothetical repository to the host rock, the developed code in the present study could help identify the total transport of radionuclide along the complete pathway.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.438-444
• /
• 2004

The intelligent robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robots need to recognize their position and posture in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for a robot to estimate of his position by solving uncertainty for mobile robot navigation, as one of the best important problems. In this paper, we describe a method for the localization of a mobile robot using image information of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using the a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot's position. Since the equations are based or the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the mobile robot. The Kalman filter scheme is applied for this method. its performance is verified by the computer simulation and the experiment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.99-110
• /
• 2009

This study is to establish urban green network on the urbanized area using characteristics of fragmented and ornamental green area distribution. To do this, the survey for the green area characteristics was carried out in Changwon City. In order to analyze network, a virtual network in whole city sky for bird's movement, which is consisted with 30m grid lines was prepared. To analyze which network routes depend on the direction, we estimated bird's movement between 8-direction and 16-direction's outskirt forest's source point and inner city's fragmented green area. In the analysis of two types different direction models, the results of green network routes are mostly matched. So green network plan by this results is more reasonable for enhancing bird's movement to inner city. Based on the these findings, this green network planning will be providing for inner city to influx outside forest's birds and maximize the ecological connectivity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1394-1401
• /
• 2008

This work investigates the effects of vibration on the passive intermodulation distortion characteristics of base station antennas for 800 MHz CDMA mobile communication systems. In general, base station antennas are located at high positions such as on building rooftops or iron towers. Thus the antennas are always affected by random vibrations, coming from various natural environmental factors such as rain and wind, or from living environmental factors such as vehicles and trains passing by. The measured intermodulation distortion characteristics before and after vibration accelerated degradation test show that vibrations are indeed the main cause for the intermodulation distortion performances of such antennas. To minimize the effects of vibrations, a new antenna design isptoposed that has an improved tolerance for vibrations. Experimental results show that the proposed antenna design dramatically reduces the degradation of the intermodulation distortion more than 35 dB.

• Journal of KIISE:Software and Applications
• /
• v.28 no.10
• /
• pp.699-705
• /
• 2001

As it became possible to generate 3D sound on a PC environment due to the advances in computing performance and digital signal processing technology, 3D sound technology gains its focus in the multimedia area Specifically a two-channel based 3D sound technology is being studied by many researchers because of its space efficiency and economical structure. While the positional sound effect is simple in its implementation, the moving sound effect has many problems to be resolved as there are only discrete measured point of HRTF database. In this paper, we propose the method of generating smooth moving sound in a two-channel based 3D sound technique with respect to generating smooth trajectory, and the interpolation method of discrete measured HRTF data. We perform the tests in the PC environment and prove the utility of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.117-126
• /
• 2013

Path planning is an essential problem to make virtual characters navigate in many applications including computer games. In many cases, multiple characters move in a group and qualitative aspects of planned paths are emphasized rather than optimality unlike Robotics. In this paper, we propose a two-level path planning algorithm in which the global path is planned for a single character specified as a leader and then the local path is planned to avoid dynamic obstacles while the group following this path. The space for group movement is achieved in the form of square grid array called a grid window. Member characters are located relatively to the leader within a space and moved. The static environment is reduced to the configuration space of this grid window to generate a roadmap on which a grid window can move. In local path planning, only the leader avoids dynamic obstacles by using an artificial potential field and the rest of members are located relatively to the leader in the grid window, which reduces computational load. Efficient algorithms to implement the proposed planning methods are introduced. The simulation results show that a group can handle with dynamic obstacles effectively while moving along the planned path for a static environment.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.137-148
• /
• 2022

In this study, ship movement simulation was performed based on a marine physics model for the ancient port presumed under the past environmental conditions in the coastal area of Hwaseong, which played an important role as a center of trade in the Three Kingdoms and Unified Silla periods. The paleo topographical surface was reconstructed through the analysis of borehole sediments, and the paleo coastline was extracted through the geomorphological maps published during before independence. Based on the established paleo environmental conditions of the Hwaseong coast, the marine physics model (FVCOM) was used to simulate the flow of surface currents and the route of floating materials assumed to be ancient ships. As a result, the processes of moving ships from the port to the open sea in the Eunsupo area, which is estimated location of the ancient port related to Dangseong, was well simulated, and thus the reliability of the location of the ancient port estimated by the scientific method was secured. This study is significant as a result of convergence research that encompasses archeology, history, geomorpology, geology, and oceanography.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.251-259
• /
• 1999

A computer simulation was conducted for heat and momentum transfer in a roller kiln. Time-averaged Navier-Stokes equation conjugated with energy balance equation was numerically solved to predict the temperature distribution and fluid flow field in the roller kiln. A computer simulation was performed for a roller kiln for three cases. Firstly, when there are no ceramic materials in the roller kiln, the effect of natural convection was studied on the temperature distribution and fluid flow field. From the result, it was observed that air takes the heat of wall away from the roller kiln by natural convection and the heat was not transferred effectively. Secondly, with ceramic materials temperature difference of ceramic material from the borrom to the top of a ceramic material was about 255K in 5th zone and this is because the heat is transferred from the surface of a ceramic material to flowing air with relatively low temperature. Finally, we considered effect of radiation heat transfer. Temperature difference of ceramic material in 5th zone was about 300 K, due to radiation heat transfer on the ceramic material surfaces.