• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.166.2-166.2
• /
• 2012

국내에서 개발한 고기동 저궤도 위성이 일본 다네가시마 우주센터에서 2012년 5월 18일 발사되었다. 자세제어계는 위성의 임무수행을 완수할 수 있도록 발사 후부터 위성 수명 기간 동안 자세명령을 생성하고 제어 및 결정을 하며, 궤도 조정과 모멘텀 덤핑등의 임무를 수행한다. 이러한 임무 수행을 가능하게 하기 위해 자세제어계는 적절한 센서와 구동기 조합을 사용하여 추력기 기반 안전모드, 궤도 조정을 위한 Del-V Burn 기동 모드, 태양지향 서브모드 및 목표지향 서브모드 등을 설계했다. 고기동 위성의 초기 운용 중 자세제어계는 자세제어계 하드웨어의 초기 구동 및 점검을 수행하고 설계한 각 모드의 기능과 성능 확인을 수행하게 된다. 본 연구는 성공적으로 완료한 자세제어계 하드웨어의 초기 점검 결과를 소개하는 것이 목적이다. 초기 운용은 위성이 발사된 직후 탑재컴퓨터가 깨어나면서부터 시작되는데, 발사 후 최초 접속시 추력기 기반 안전모드에서 태양 획득 성능 및 제어 성능을 확인한 후 정상 상태 모드인 태양지향 자세로 전환하기 위해 자세제어계 하드웨어인 별 추적기, 자기토커, 반작용휠의 초기 구동 및 점검을 수행하였다. 본 연구에서는 각 하드웨어의 초기 구동 점검과 성능 및 기능 요구조건 만족에 대한 성능 분석 결과를 정리하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.135-140
• /
• 2009

In this paper, we synthesized active sonar target signals based on highlights model, and then carried out target classification using the synthesized signals. If the target aspect angle is changed, the different signals are synthesized. To know the result, two different experiments are done. First, The classification results with respect to each aspect angle are shown. Second, the results in two group in aspect angle are acquired. Time domain feature extraction is done using matched filter and envelope detection. It shows the pattern of each highlights. Artificial neural networks and multi-class SVM are used for classifying target signals.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.330-336
• /
• 2021

In bistatic sonar operation, the scattering strength of a sonar target is characterized by the probe signal frequency, the aspect angle and the bistatic angle. Therefore, the target detection and identification performance of the bistatic sonar may vary depending on how the positions of the target, sound source, and receiver are changed during sonar operation. In this study, it was evaluated which variable is advantageous to change by comparing the target identification performance between the case of changing the aspect angle and the case of changing the bistatic angle during the operation. A scenario of identifying a hollow sphere and a cylinder was assumed, and performance was compared by classifying two targets with a support vector machine and comparing their accuracy using a finite element method-based acoustic scattering simulation. As a result of comparison, using the scattering strength defined by the frequency and the bistatic angle with the aspect angle fixed showed superior average classification accuracy. It means that moving the receiver to change the bistatic angle is more effective than moving the sound source to change the aspect angle for target identification.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.322-325
• /
• 2015

본 논문에서는 개선된 자세 인식을 위한 학습을 통한 자세 인식 기법을 제안한다. 제안 자세 인식 기법은 영상의 모든 픽셀 값을 사용하지 않으며 인체의 골격의 위치 정보와 자세의 학습을 기반으로 한다. 최근 자세 인식기법에 다양한 기계 학습 기법을 적용하여 제스처 인식률을 높이는 연구가 진행되고 있지만 실시간 프레임에 적용하는데 한계가 있다. 반면 고차원의 특징점을 추출하여 신경망 학습방식을 이용하면 적은 계산량과 손쉬운 실행이 가능하다. 고차원의 특징점은 깊이 정보로부터 사람의 골격 정보를 이용해 추출하여 차원을 감소시키며 신경망 학습 방식에서는 각 자세에 대한 고차원의 특징점을 이용하여 자세의 학습을 진행한다. 신경망학습은 학습 단계에서는 미리 알려진 자세와 예측된 자세의 비교를 통해 오류를 최소화 하는 방향으로 학습을 진행하며, 판별 단계에서는 새로운 자세를 입력하여 고차원 특징점을 이용한 신경망 학습 기반의 제안 기술의 성능을 평가한다. 실험에 의하면 제안 기법은 약 96%의 자세 인식률을 보이고 자세 인식기법을 동작 인식으로 확장 가능성 또한 보인다.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.159-163
• /
• 2014

Agricultural unmanned helicopters have become a new paradigm for aerial application. Yet, such agricultural helicopters require easy and affordable attitude control systems. Therefore, this study presents an affordable attitude measurement system using a DCM (direction cosine matrix) algorithm that would be applied to agricultural unmanned helicopters. An IMU using a low-cost MEMS and an algorithm to estimate the attitude of the helicopter were applied in a gimbals structure to evaluate the accuracy of the attitude measurements. The estimation errors in the attitude were determined in comparison with the true angles determined by absolute position encoders. The DCM algorithm and sensors showed an accuracy of about 1.1% for the roll and pitch angle estimation. However, the accuracy of the yaw angle estimation at 3.7% was relatively larger. Such errors may be due to the magnetic field of the stepping motor and encoder system. Notwithstanding, since the intrinsic behavior of the agricultural helicopter remains steady, the determination of attitude would be reliable and practical.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.131-142
• /
• 2015

In order to support the development of a cost-effective river bathymetric system, this research has focused on modeling GPS observables, which are obtained by array of five single-frequency receivers (i.e., two references and three rovers) to estimate the high accurate kinematic position, and the surveying vessel altitude. Also, by applying all GPS measurements as multiple-baselines with constraining rover baselines, we derived the socalled ‘kinematic network model.’ From the model, the integer-constrained least-squares (LS) for position estimation and the implicit LS for attitude determination were implemented, while a series of simulation tests with respect to the baseline lengths around 2km performed to demonstrate its accuracy analysis. The on-the-fly (OTF) ambiguity resolution tests revealed that ninety-nine percents of time-to-fix-first ambiguity (TTFF) can be decided in less than two seconds, when the positioning accuracy of ambiguity-fixed solutions was assessed as the greater than or equal to one and two centimeters in horizontal and vertical, respectively. Comparing to the GPS-derived attitudes, the achievable accuracy gradually descended in sequence of yaw, pitch and roll due to the antenna geometric configuration. Furthermore, the RMSE values for the baseline lengths of three to six meters were within ±1′for yaw, and less than ±10′and ±20′for pitch and roll, respectively, but those of between six to fifteen meters were less than ±1′for yaw, ±5′for pitch, and ±10′for roll.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1722-1729
• /
• 2005

In this paper, we used the quadruped walking robot Titan-VIII in order to carry out this simulation of sway compensation trajectory. The attitude angle ${\phi}_r$ and ${\phi}_p$ is obtained from 3-D motion sensor that is attached at the center of robot body and the attitude control carried out at every 10[ms] for stable gait of robot. Duty factor, that is fixed at 0.5. When we change period T into 1.5, 2.0, 3.0[sec] each and moving distance per period is changed into 0.2, 0.3(m), we sim띠ate several walking experiment of robot. and then we analyze the experiment results if there are any difference between the imaginary ZMP and actual ZMP of robot and the stable gait of robot is realized.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.619-626
• /
• 2017

In this work, the effect of attitude angle variation on drag coefficients of hemisphere in a Mach 6 flow has been investigated. Experiments were conducted in a shock tunnel and a free-falling technique was used to minimize flow disturbance by a sting. For attitude and drag coefficient measurements of a free-falling hemisphere, a free-falling technique based on a releasing mechanism with a stair-typed module and an electromagnet was developed. A shadowgraph technique was used for flow visualization using a high-speed camera.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.129-142
• /
• 1995

The purpose of this study was to estimate correlations of craniocervical posture and craniofacial morphology in Korean young adults. The sample consisted of 50 young adults (25 males and 25 females) who had good profile and Class I molar relationship. The analysis of craniocervical posture and craniofacial morphology was performed on lateral cephalograms taken in natural head position. The results were as follows, 1. The mean and the standard deviation of postural and morphologic variables were obtained. 2. Korean young adult had cervical lordosis of which degree between OPT and CVT shows $3.55{\pm}2.58^{\circ}$ 3. Craniocervical posture and each of vertical ratio, facial prognathism, mandibular rotation showed high correlation. 4. Correlation coefficients between postural variables and each of intermaxillary relation, anteroposterior ratio were low. 5. The head positioning error of natural head position was smaller than the inter-individual variability of postural variables.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2006

Human tracking is a requirement for the advanced human-computer interface (HCI), This paper proposes a method which uses a component-based human model, detects body parts, estimates human postures, and animates an avatar, Each body part consists of color, connection, and location information and it matches to a corresponding component of the human model. For human tracking, the 2D information of human posture is used for body tracking by computing similarities between frames, The depth information is decided by a relative location between components and is transferred to a moving direction to build a 2-1/2D human model. While each body part is modelled by posture and directions, the corresponding component of a 3D avatar is rotated in 3D using the information transferred from the human model. We achieved 90% tracking rate of a test video containing a variety of postures and the rate increased as the proposed system processed more frames.