• Electrical & Electronic Materials
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1993

최근에 있어서 광자기기록 재료의 연구개발은 실용화 단계에 이른 비정질 RE-TM막을 중심으로 하여 내식성, 보호막, 기판재료, 양산기술 향상 등에 촛점이 맞추어져 있다. 한편 장래의 문제로서 일층 고성능화와 보다 생산성이 놓은 재료의 개발이 기대되고 있다. 고성능화를 위해서는 반도체 레이저의 고출력, 단파장화가 가장 효과적이라고 생각되나 이에 맞는 기록재료의 개발연구도 병행되어 져야한다. 기존의 반도체 레이저 범위안에서는 RE-rich의 막을 기록층으로 하고 적당한 재생층을 갖는 2층 막으로 부터 밀도 및 속도의 양면에서 최고의 성능이 얻어지고 있다. 장래 단파장 반도체 레이저가 개발된다면 경희토류를 이용한 막에서 고성능화가 아루어질 것으로 보이며 또한 Pb/Co, Pt/Co등 자성다층막이 RE-TM 재료의 단점을 보완하고 한층 더 고밀도화를 이룩할 수 있는 차세대 광자기기록 재료로 기대를 모으고 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.107-107
• /
• 2005

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.264-268
• /
• 2002

Magnetic fluid is a very stable colloid that is attracted by magnetic force as wholly. The magnetic fluids is composed with 10 nm magnetic materials such as magnetite, iron etc., which is dispersed homogeneously in solvent by coating surfactant on their surface. Also this colloid is not separated into magnetic particles and solvent even under magnetic field, centrifugal force, gravity. Due to these properties, the magnetic fluids is used in high vacuum seal, exclusion seal, damper, etc. I would like to introduce the specific properties and applications of the magnetic fluids.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.89-96
• /
• 2004

1980년대 후반부터 집중적으로 연구되어온 기계적 합금화 공정 기술은 이제 단순화합물 조성의 합금화공정 뿐 만아니라 기계화학적(Mechanochemical) 방법으로까지 진보되어 다양한 시스템으로의 응용기술로까지 발전하게 되었다 더욱이 최근 나노기술의 한고상 제조기술로서도 역할을 하게 되는 기계적 합금화 공정 기술은 21세기에 있어서도 본문에서 연급한 바와 같은 고온용 고장도 Al 합금제조 외에도 나노결정립 분말, 자성재료, 에너지전환/저장기능재료, 준결정상제어 분야로서의 무한한 응용 가능성을 기대해 볼 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.81-86
• /
• 2002

이전에 Magnetic Fluid를 이용하여 의료기기 등에 사용할 목적으로 Linear Actuator를 설계, 제작하였다. 그러나 이 모델은 공극의 높은 자기저항으로 인해 펌핑 압력이 낮고, 그 부피 또한 크다. 따라서 본 논문에서는 Yoke를 이용하여 Linear Actuator를 소형화하고 자기저항을 최소화함으로써 펌핑 압력을 향상시켰다. 또한 Linear Actuator의 3D해석을 통하여 Yoke의 폭, 두께, 간격에 대한 최적 크기를 계산하고 설계하였으며, 실제 제작 및 실험을 하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.245-251
• /
• 2015

We have applied mechanical alloying (MA) to produce soft magnetic composite material using a mixture of elemental $Fe_2O_3$-Mg powders. An optimal milling and heat treatment conditions to obtain soft magnetic ${\alpha}$-Fe/MgO composite with fine microstructure were investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that ${\alpha}$-Fe/MgO composite powders in which MgO is dispersed in ${\alpha}$-Fe matrix are obtained by MA of $Fe_2O_3$ with Mg for 30 min. The saturation magnetization of ball-milled powders increases with increasing milling time and reaches to a maximum value of 69.5 emu/g after 5 h MA. The magnetic hardening due to the reduction of the ${\alpha}$-Fe grain size by MA was also observed. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine at $800{\sim}1000^{\circ}C$ under 60 MPa. X-ray diffraction result shows that the average grain size of ${\alpha}$-Fe in ${\alpha}$-Fe/MgO nanocomposite sintered at $800^{\circ}C$ is in the range of 110 nm.

• Journal of the Korean Magnetics Society
• /
• v.21 no.3
• /
• pp.83-87
• /
• 2011

We have analyzed the torque signals measured in synthetic antiferromagnetic (SAF) coupled CoFeB/Ru/CoFeB thin film, which signals were drastically changed at flopping field ($H_F$) and saturation field ($H_s$). The minimum value of negative uniaxial anisotropy constant ($-\;K_1$) was appeared at HF. The $-\;K_1$ was due to the zero net magnetization by the antiferromagnetic coupling between two ferromagnetic layers. Whereas, the biaxial anisotropy constant (K2) was induced in the field range of $H_F$ < H < $H_s$. The induced $K_2$ was originated from deviation angles between magnetization directions of two ferromagnetic layers. And at H > $H_s$, intrinsic uniaxial anisotropy constant of CoFeB layer was observed. These change of the anisotropy constant with magnetic field was explained by the magnetization process of two ferromagnetic layers based on Stoner-Wohlfarth model calculation for SAF thin film.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.701-706
• /
• 1999

The crystal structure and magnetic properties of magnetic oxide system (F $e_2$ $O_3$)$_{5}$(A $l_2$ $O_3$)$_{4-x}$(G $a_2$ $O_3$)$_{x}$)SiO has been studied using X-ray diffraction and Mossbauer spectroscopy The changes of magnetic structure by the Ga ion substitution and the temperature variation have been investigated using Mossbauer spectroscopy, and the results are compared with those of the SQUIB measurements. Results of X-ray diffraction indicated that the crystal structures of the system change from a cubic spinel type to an orthorhombic via the intermediate region. This magnetic oxide system seems to be new kind of spinel type ferrites containing high concentration of cation vacancies. Various and complicated Mossbauer spectra were observed in the samples (x>0.2) at temperatures lower than room temperature. This result could be explained by freezing of the superparamagnetic dusters. On cooling and substitution, magnetic states of the system show various and multicritical properties. Unexpected dip in magnetization curves below 50K was observed in SQUID measurements. It was interpreted as an effect of spin canting including spin freezing or collective spin behavior.ior.r.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.240-242
• /
• 2000

This study was investigated absorption properties of electromagnetic wave in thermal sprayed Sr-ferrite coatings. The experiment of this study was ; manufactured thermal spraying powder for improving absorption-efficiency, processed for increasing strength of thermal spray coatings, and measured the electromagnetic wave shielding efficiency. This study was obtained excellent absorption-efficiency by thermal sprayed Sr-ferrite coatings.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.117-118
• /
• 2009