• 제목/요약/키워드: 자발화

검색결과 213건 처리시간 0.023초

초음파에 의해 무화된 케로신 분무연소에서의 OH 라디칼 및 CH 라디칼 자발광 특성 (OH-and CH-Radical Chemiluminescence Characteristics in the Spray Combustion of Ultransonically Atomized Kerosene)

  • 김민철;김정수
    • 한국추진공학회지
    • /
    • 제22권1호
    • /
    • pp.72-79
    • /
    • 2018
  • 초음파 진동자에 의해 미립화된 케로신 분무연소의 OH 라디칼과 CH 라디칼의 자발광 특성을 고찰하기 위한 실험이 수행되었다. ICCD 카메라를 이용하여 분무화염의 자발광 강도를 측정하였으며, 연소 시 소모된 연료량은 정밀유량측정법으로 계측하였다. 그 결과, 연료소모율은 수송기체인 공기 공급유량에 선형적으로 증가하였으며, 분무연소의 특징인 전형적인 그룹 연소가 관찰되었다. OH 라디칼과 CH 라디칼을 분석한 결과, 분사방향으로의 유량 증가에 따라 라디칼 방사강도의 최댓값은 감소하고 그 위치는 후류로 이동하여 반응대의 폭은 증가하였다.

정상 노인과 알츠하이머성 치매 환자의 자발화 산출에서의 언어적 특징 (Linguistic Features of Spontaneous Speech Production in Normal Aging, Alzheimer's Disease)

  • 김정완
    • 한국노년학
    • /
    • 제32권3호
    • /
    • pp.747-758
    • /
    • 2012
  • 본 연구는 임상 현장에서 정상 노인과 변별되는 알츠하이머성 치매 환자의 자발화 과제에서의 수행력을 알아보기 위해 실시되었다. 연구방법은 65세 이상의 정상노인 13명과 알츠하이머성 치매 환자 26명(치매 의심(questionable) 9명, 경도(mild) 치매 9명, 중도(moderate) 치매 8명)을 대상으로 대화하기 및 연속그림 설명하기 과제를 실시하였고, 전체 발화 템포, 주저시간(초단위), 조음 음운 오류, 그리고 문법적 오류를 포함한 네 가지 구어적 요소에 대해 분석, 비교하였다. 연구결과, 네 가지 요소 모두에서 집단 간 차이를 보였다. 특히, 전체 발화 템포는 정상노인과 세 치매 환자군 각각에서 유의한 차이를 보였는데, 주저시간은 중도 치매에서만, 그리고 조음 음운 오류는 경도, 중도 치매군에서만 증가되었다. 문법적 오류는 정상노인과 비교하여 치매의심군과 중도 치매군에서 유의하게 증가되었다. 상기 연구 결과를 통해, 다음과 같은 결론을 제시할 수 있다. 첫째, 정상노인과 세 치매 환자군을 가장 변별력있게 구분할 수 있는 구어적 요소는 전체 발화 템포이다. 둘째, 조음 음운능력은 치매의심군에서는 감소하지 않지만, 경도 및 중도치매군에서는 그 수행력이 떨어진다. 셋째, 문법적 오류는 중도 치매환자군에서부터 확연히 증가한다. 향후, 자발화 과제를 통해 의료기관 외의 장소에서도 치매 선별의 용이성을 더할 수 있으며, 담화 차원의 언어능력에 대한 관찰이 가능하므로 다양한 원인질환을 가진 치매 환자들의 정보를 얻을 수 있을 것으로 기대된다.

분사시기의 변화에 따른 제어자발화 가솔린기관의 배기특성 (An Emission Characteristics of a Controlled Auto-Ignition Gasoline Engine According to Variation of the Injection Timing)

  • 김홍성
    • 동력기계공학회지
    • /
    • 제8권3호
    • /
    • pp.5-10
    • /
    • 2004
  • This work deals with a controlled auto-ignition (CAI) single cylinder gasoline engine, focusing on the extension of operating conditions. In order to keep a homogeneous air-fuel mixing, the fuel injector is water-cooled by a specially designed coolant passage. Investigated are the engine emission characteristics under the wide range of operating conditions such as 40 in the air-fuel ratio, 1000 to 1800 rpm in the engine speed, $150\;to\;180^{\circ}C$ in the inlet-air temperature, and $80^{\circ}$ BTDC to $20^{\circ}$ ATDC in the injection timing. A controlled auto-ignition gasoline engine which has the ultra lean-burn with self-ignition of gasoline fuel can be achieved by heating inlet air. It can be achieved that the emission concentrations of carbon monoxide, hydrocarbons and nitrogen oxides had been significantly reduced by CAI combustion compared with conventional spark ignition engine.

  • PDF

공기연료비의 변화에 따른 제어자발화 가솔린기관의 배기 특성 (An Emission Characteristics of a Controlled Auto-Ignition Gasoline Engine according to Variation of the Air-Fuel Ratio)

  • 김홍성
    • 한국기계가공학회지
    • /
    • 제3권2호
    • /
    • pp.79-85
    • /
    • 2004
  • This work treats a controlled auto-ignition (CAI) single cylinder gasoline engine, focusing on the extension of operating conditions. Investigated are the engine emission characteristics under the wide range of operating conditions such as 32 to 63 in the air-fuel ratio, 1000 to 1800 rpm in the engine speed, and 150 to $180^{\circ}C$ in the inlet-air temperature. A controlled auto-ignition gasoline engine can be achieved the ultra lean-burn with self-ignition of gasoline fuel by heating inlet air. It can be achieved that the emission concentrations of carbon monoxide, hydrocarbons and nitrogen oxides had been significantly reduced by CAI combustion compared with conventional spark ignition engines.

  • PDF

제어자발화 가솔린기관의 배기 특성 (An Emission Characteristics of a Controlled Auto-Ignition Gasoline Engine)

  • 김홍성
    • 동력기계공학회지
    • /
    • 제13권3호
    • /
    • pp.5-10
    • /
    • 2009
  • This work deals with a controlled auto-ignition (CAI) single cylinder gasoline engine, focusing on the extension of operating conditions. The fuel is injected indirectly into electrically heated inlet air flow. In order to keep a homogeneous air-fuel mixing, the fuel injector is cooled by the water of a specially designed coolant passage. The engine emission characteristics were investigated under the wide range of operating conditions such as 32 to 63 in the air-fuel ratio, 1000 to 1800 rpm in the engine speed, and 150 to $180^{\circ}C$ in the inlet air temperature. The ultra lean-burn can be achieved by the auto-ignition of gasoline fuel due to the heated inlet air in the compression ignition gasoline engine. It is confirmed that the emission concentrations of carbon monoxide, hydrocarbons and nitrogen oxide can be significantly reduced by CAI combustion compared with the combustion of a conventional spark ignition engine.

  • PDF

가솔린 엔진에서의 노킹 현상 해석 (Investigation of the Knocking Phenomenon in SI Engines)

  • 민경덕
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.17-23
    • /
    • 2000
  • Knock in SI engines causes physical damage to the piston and combustion chamber and lowers the thermal efficiency. The increase in compression ratio which can improve the thermal efficiency and engine performance has been limited by engine knock. So the need of making clear the knocking phenomenon has increased. This paper reviews the methods of knock detection, characterization and prediction of knock with the reduced chemical kinetic modeling.

  • PDF

축소 반응 메카니즘으로부터 예혼합 화염 및 자발화 계산 (Premixed Flames and Auto-ignition Computations with the Short Chemical Mechanism)

  • 이수각;이기용
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.279-281
    • /
    • 2012
  • A short chemical mechanism was developed with the chemical model reduction strategy based on the use of Simulation Error Minimization Connectivity Method(SEM-CM). We examined the accuracy resulting from using this mechanism, as compared with the full mechanism, for premixed flames and auto-ignition of methane-air mixture under high pressures. These comparisons are in good agreement, but it has a little divergence to predict the ignition delay time at high pressure conditions as compared with experiment results.

  • PDF

가솔린 엔진에서의 노킹 현상 해석 (Investigation of the Knocking Phenomenon in SI Engines)

  • 민경덕
    • 한국연소학회지
    • /
    • 제5권2호
    • /
    • pp.29-35
    • /
    • 2000
  • Knock in SI engines causes physical damage to the piston and combustion chamber and lowers the thermal efficiency. The increase in compression ratio which can improve the thermal efficiency and engine performance has been limited by engine knock. So the need of making clear the knocking phenomenon has increased. This paper reviews the methods of knock detection, characterization and prediction of knock with the reduced chemical kinetic modeling.

  • PDF

유화액적 배열에서의 자발화와 미소폭발의 특성 (Characteristics of Auto-ignition and Micro-explosion for Array of Emulsion Droplets)

  • 정인철;이경환;김재수
    • 에너지공학
    • /
    • 제16권3호
    • /
    • pp.113-119
    • /
    • 2007
  • 데칸에 물을 혼합하여 일정한 크기와 간격으로 유화액적배열을 형성하여 물과의 혼합비율, 액적의 수 그리고 액적 간격 등이 연소특성에 어떠한 영향을 주는가를 고온의 연소실에서 파악하였다. 각각 10%, 20%, 30%의 물을 혼합하여 유화액적을 만든 후 일정한 크기의 액적을 각각의 서스펜더에 매달아서 일정한 간격의 액적배열을 만들어 고온에서 자발화를 시켰을 때, 점화지연, 수명시간, 전연소기간 그리고 미소폭발 등의 연소특성을 비교하였다. 대기압에서 연소실의 온도를 920 K로 하고 서스펜더의 수를 3개와 5개로 하였으며 액적배열의 간격은 $3{\sim}7\;mm$ 범위에서 1 mm 간격으로 각각 실험을 수행하였다. 본 실험을 통하여 물의 혼합비율이 높을수록, 그리고 액적배열의 간격이 넓을수록 점화지연현상이 길게 나타났으며, 수명시간은 액적의 간격이 넓을수록 짧게 나타났으며 점화지연시간과 수명시간의 합인 전연소기간은 액적의 수량이 3개인 경우가 점화지연시간이 긴 관계로 5개에 비해 길게 나타남을 확인하였다.

터보과급 및 EGR을 사용하는 직접분사식 디젤엔진의 연소특성에 미치는 Ar과 He첨가의 영향 (Effects of Ar/He Dilution on Combustion Characteristics in DI Diesel Engine using Turbocharging and EGR)

  • 권영동;김용모;박신배;백현종;이동권
    • 한국자동차공학회논문집
    • /
    • 제5권5호
    • /
    • pp.140-156
    • /
    • 1997
  • The combustion characteristics of DI Diesel engine using turbocharging and EGR are numerically studied. Computations are carried out for the wide range of trubochyarged pressures, EGR ratios, and Ar/He dilution. Numerical results indicate that the Ar/He dilution in the intake gas significantly influence the engine performance, the spray combustion process, and the pollutant formation.

  • PDF