• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.25-33
• /
• 2000

In recent years, the subject of remaining life assessment has drawn considerable attention in power plants, where various structural components typically operate at high temperature and pressure. Thus a life prediction methodology accounting for high temperature creep fracture is increasingly needed for the components. Critical defects in such structures are generally found in the form of semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. On this background, we first develop an auto mesh generation program for detailed 3-D finite element analyses of axial and circumferential semi-elliptical surface cracks in a piping system. A high temperature creep fracture parameter $C^{\ast}$-integral is obtained from the finite element analyses of generated 3-D models. Post crack growth module is further appended here to calculate the amount of crack growth. Finally the remaining lives of surface cracked pipes for various analytical parameters are assessed using the developed life assessment program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2515-2521
• /
• 2010

The aim of this study is to analyze the mortality and potential years of life lost (PYLL) by malignant neoplasm of lung between OECD countries and Korea. Based on the result, we tried to point out a problem on mortality caused malignant neoplasm of lung to make the best strategy for policy and education on public health. Using the ANOVA analysis between Korean and OECD countries, the lung cancer-induced mortality and PYLL in total and gender-specific Korean population were greater after 21th century than before. In particular, the PYLL was sharply elevated than the mortality. Taken together, the present study indicated that the lung cancer-induced PYLL between Korean and OECD countries can be more important parameter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.721-728
• /
• 2017

High-grade gray cast iron (HCI350) was prepared by adding Cr, Mo and Cu to the gray cast iron (GC300). Their microstructure, mechanical properties and fatigue strength were studied. Cast iron was made from round bar and plate-type castings, and was cut and polished to measure the percentage of each microstructure. The size of flake graphite decreased due to additives, while the structure of high density pearlite increased in volume percentage improving the tensile strength and fatigue strength. Based on the fatigue life data obtained from the fatigue test results, the probability - stress - life (P-S-N) curve was calculated using the 2-parameter Weibull distribution to which the maximum likelihood method was applied. The P-S-N curve showed that the fatigue strength of HCI350 was significantly improved and the dispersion of life data was lower than that of GC300. However, the fatigue life according to fatigue stress alleviation increased further. Data for reliability life design was presented by quantitatively showing the allowable stress value for the required life cycle number using the calculated P-S-N curve.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.15-16
• /
• 2007

장기 송변전설비계획 수립 및 최적 계통운용을 위한 각종 검토업무를 위해서는 현재 운영중인 기설 전력계통 구성요소와 함께 향후 건설예정 설비의 전력계통 구성요소에 관한 제반자료가 필수적으로 소요되며, 이들 자료에 대한 정합성 및 통일성 유지가 매우 중요하다. 그러나 한국전력공사(이하 한전)에서는 이러한 자료가 활용목적 등의 차이로 인해 부서별로 관리대상이 다르며, 자료의 수집 및 관리업무가 전통적인 수작업 방식으로 이루어짐에 따라 업무 능률성, 자료갱신 적시성, 자료의 정확성 측면에서 개선해야할 과제로 여겨왔다. 본 논문에서는 최근 한전의 ERP(Enterprise Resource Planning, 전사적 자원관리) 구축과정에서 송변전설비 전력계통 구성요소 관리시스템을 구현함에 있어 단편적인 자료 관리기능이 아니라, 설비의 계획으로부터 건설, 운영, 폐기에 이르는 전 과정에 대해 PLM (Product Lifecycle Management, 수명주기관리)기법을 적용하여 해당분야에 획기적인 개선을 이룩한 사례를 기술하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.83-93
• /
• 1998

The twin aims of the present study are to develop a PC program for the statistical analysis of the measured cohesion data and to suggest a probabilistic corrosion rate estimation model for longitudinal members of tanker structures. A data analysis for the corrosion rate statistics(i.e., mean, standard deviation) as a function of the corrosion parameters is established for various structural member categories/locations of interest. Development of the computer program is focused on possible operation together with future addition of more corrosion data as they become available. To investigate the influence of the corrosion protection scheme a series of the corrosion analysis varying the life of coating are carried out and several different corrosion models as a function of time are suggested depending on the coating life.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.25-40
• /
• 2015

Korean tourist areas are designated/managed in accordance with the Tourism Promotion Act. Since Taejongdae was designated as a tourist area in 1969, a total of 230 tourist areas have been designated/built/operated. It has been 46 years since the first tourist area was designated. According to the Tourism Area Life Cycle by Butler, it is estimated that the flow of the life cycle will be reflected in ups and downs over time. Thus, this study aimed to provide basic data for suggesting the direction of changes and development of the future tourist areas after analyzing the life cycle stage of domestic tourist areas, by applying the Tourism Area Life Cycle by Butler. The research method was based on the tourist areas by year, the number of visitors, and data of the target to derive the change transition curve, obtained by dividing the life cycle stages of the tourist areas based on the visitor rate of change. In the analysis results, more than 1/3 of domestic tourist areas are reaching the stagnation/decline stage, and tourist areas such as hot springs and seaside/beach resources show a particularly high ratio of stagnation/decline. The tourist areas that already have reached the stagnation/decline stage will need to analyze the causes for the decline, seek for resolution measures, and introduce new innovative elements. Even though the results of this study are not sufficient to be used as an absolute standard to decide the life cycle stage of domestic tourist areas, it is considered to be adequate for phenomenologically understanding the life cycle stage of Korean tourist areas. Based on this study, the causes for the stagnation/decline of tourist areas can be revealed while it can be also used as basic research to establish revitalization measures for tourist areas by introducing new innovation.

• Smart Media Journal
• /
• v.12 no.5
• /
• pp.111-121
• /
• 2023

The purpose of this study is to find methods for logo renewal design according to the brand life cycle, considering the logo as an important visual tool that represents the brand identity in terms of brand management. This study was conducted through literature study on brand life cycle and brand renewal strategy, an expert survey on logo renewal design, and logo analysis of 35 food and beverage brands with statistical data to determine brand life cycle. The results of the study are three. First, the four stages(introduction, growth, maturity, and decline) of brand life cycle characteristics and renewal strategies were derived. Second, four brand renewal strategies(partial change, total change, repositioning, new image creation) and methods for logo renewal design were proposed based on the life cycle of the brand. Based on this, renewal characteristics for each life cycle were proposed. Third, visual elements of identity that are important depending on the brand life cycle and brand renewal strategy were found. It was found that the addition and subtraction of graphic elements and change of color tone are important in the partial change strategy of the growth period and maturity period, and that the change of signature color is important in the repositioning strategy and the creation of the new image.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.332-339
• /
• 2020

This study was a prior study to establish the shelf life of bulletproof helmets, considered the aging factor of bulletproof helmets. To estimate the aging factor of bulletproof helmets, we established a hypothesis that the 'temperature' factor would have the greatest impact on the shelf life of the bulletproof helmet, considering the environmental treatment of the American army's bulletproof helmet's materials. To verify the hypothesis, high temperature acceleration environmental treatment of bulletproof helmets was performed, and the Arrhenius formula was applied to calculate the shelf life. The study result confirmed the negative correlation between bulletproof performance and high temperature, and the influence of temperature as an aging factor was not significant by deriving life by using the Arrhenius model. The limitation of this study is that we couldn't obtain enough samples due to the specificity (miliary supplies) of the test subjects. However, given that the life-related research on bulletproof helmets has not been carried out, this research has great implications and could be used as a reference for improving the Korean Army's bulletproof helmet specifications.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1245-1256
• /
• 2014

The physical nature of fatigue shows the considerable amount of scatter from intrinsic and extrinsic factors. In this study, some degradation models, such as the gamma process model, were reviewed in terms of uncertainties associated with the continuous, gradual, and monotonic nature of fatigue crack growth. Statistically varying fatigue crack growth data obtained from Lu and Meeker were used as an example to demonstrate the use of the gamma process model. This model can describe the condition and lifetime as statistical distribution curves whose shapes vary with cycles. From the skewness of the statistical distribution curves, it was confirmed that the median is suitable for being considered as the expected life. The use of the gamma process model enables the optimum replacement period and percentile life to be employed as criteria for preventive maintenance policy.

• Land and Housing Review
• /
• v.6 no.4
• /
• pp.165-175
• /
• 2015

This study is focusing on the needs to introduce policy decision making based on identification of the definition for 'business life cycle' and 'public enterprises' for proper public enterprises management. For this purpose, the study is planning to define categorical variables for enterprise life cycle and provide basic data for public enterprises management policy. This study explored 'Korea Expressway Corporation', 'K-water', 'Korea Railroad', 'Korea Land and Housing Corporations', because of they are the public institutions recently underwent 'management normalization policy' due to rapidly increasing debt. First, there follows the analysis on priority and standard of categorical variables for quasi-market oriented SOC public enterprise life cycle by using AHP and frequency study on expert survey. Next, this study investigated and analyzed the enterprises management plan for expected 'declining period' through forecasting 'declining period' by conducting 2nd expert survey.