• Title/Summary/Keyword: 자동 조정 제어기

Search Result 92, Processing Time 0.026 seconds

Design and Application of Gas Turbine Automatic Voltage Regulator for Jeju Gas Turbine Power Plant (제주화력 가스터빈 자동전압 조정기 설계 및 응용)

  • Ryu, Ho-Seon;Lee, Joo-Hyun
    • Proceedings of the KIPE Conference
    • /
    • 2008.06a
    • /
    • pp.565-567
    • /
    • 2008
  • 가스터빈용 자동전압조정기는 발전기 출력 전압을 측정하여 발전기 단자 전압과 계자 전류를 제어하며, 발전기 여자시스템 보호/제한 기능을 수행한다. 본 논문에서는 전력연구원이 개발한 가스터빈 자동전압조정기의 시작품에 대한 소프트웨어와 하드웨어에 설계 및 제주화력 가스터빈에 현장 적용한 결과를 상세히 기술하였다.

  • PDF

The effect of use of a lst order time delay in the MW control loop in a gas turbine generator and the simulation results (가스터빈 발전기의 자동 출력제어 회로와 출력신호 피이드백 회로의 필터 사용 효과에 관한 연구)

  • 김종안
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1999.10a
    • /
    • pp.170-175
    • /
    • 1999
  • 본 논문에서는 국내에서 운전 중인 한 가스터빈 출력제어 회로의 구성을 살펴보고 현장에서 취득한 자료를 근거로 하여 가스터빈의 모델과 제어기의 조정, 그리고 MW 신호 피이드백 회로에 필터의 사용효과를 시뮬레이션을 통해 살펴보았다. 전력계통의 주파수가 가스터빈 출력제어계의 시상수에 비해 상당히 빠르게 변하므로 자동 주파수 추종을 할 경우 제어계가 쉽게 불안정해진다. 이 출력제어계의 MW 피이드백 회로의 1차지연 요소를 사용하면 안정성 향상에 좋은 효과가 있으며, 이 지연요소의 시상수를 크게 할수록 안정도는 더 향상되며 Open Loop의 특성을 보이게 된다. 그러나, 주파수 추종운전이 아닌 운전원의 출력 증감발 요구에는 시간지연 없이 응답을 하여야 하므로 적절한 설정을 할 필요가 있다. 가스터빈의 연료제어 계통을 포함한 출력제어계에 순수 시간지연 요소가 없으면 피이드백 회로에 1차지연 요소를 사용하지 않는 것이 더 좋은 출력제어 응답을 나타낸다. 그러나 실제 모들 가스터빈에는 다소 시간지연 요소를 포함하고 있으므로 일반적으로 피이드백 회로에 시간지연 요소를 사용하므로써 안정성을 향상시킬 수 있다.

  • PDF

Automatic Tuning of Fuzzy Controller for Unknown Systems (미지 시스템에 대한 퍼지 제어기의 자동조정)

  • 이상구;추월영웅
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.7 no.3
    • /
    • pp.12-20
    • /
    • 1997
  • In this paper, the authors propose a method of stepwise tuning a controller with unknown process properties through! its step response. A fuzzy controller is chosen to achieve this aim. The main object of this paper is to give knowledge for the improvement of the response, under the limited prop erties obtained from the step response of the process. We obtained the adequate tuning method through simulations of many control objects. And the method of selecting optimal sampling period is also shown.

  • PDF

Design Polynomial Tuning of Multivariable Self Tuning Controllers (다변수 자기동조 제어기의 설계다항식 조정)

  • Cho, Won-Chul;Shim, Tae-Eun
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.11
    • /
    • pp.22-33
    • /
    • 1999
  • This paper presents the method for the automatic tuning of a design weighting polynomial parameters of a generalized minimum-variance stochastic ultivariable self-tuning controller which adapts to changes in the higher order nonminimum phase system parameters with time delays and noises. The self-tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing the design weighting polynomial parameters of the controller. The proposed multivariable self-tuning method is simple and effective compared with pole restriction method. The computer simulation results are presented to adapt the higher order multivariable system with nonminimum phase and with changeable system parameters.

  • PDF

Refrigerant Flow Controlling Technology of the Refrigeration and Air Conditioning System (냉동.공조 시스템의 냉매유량 제어기술)

  • 오후규;김재돌
    • Journal of the KSME
    • /
    • v.35 no.2
    • /
    • pp.154-166
    • /
    • 1995
  • 냉동\ulcorner공조기의 성능을 높이기 위해서는 정상상태 운전시는 물론 증발기 열부하 등 각종 작동 조건의 변화에 대응하여 운전의 평형점(balance point) 추이를 적절하게 조정함과 동시에 냉동 사이클 각부의 냉매 상태량을 과도적으로도 제어해야 한다. 이 글에서는 냉동\ulcorner공조기의 자동 제어에 있어서 가장 중요한 요소중의 하나인 냉매계통의 모델화와 냉동 사이클의 응답 및 제어 등에 관해서 서술하고자 한다.

  • PDF

The Design of a Pre-Compensator for the Model-Following Control in the I-PD Control System (I-PD 제어계에서 모델추종제어를 위한 전치보상기의 설계)

  • Ha, Hong-Gon
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.18 no.6
    • /
    • pp.84-90
    • /
    • 2004
  • Many control techniques have been proposed in order to improve the control performance in the control system. In the feedback control system the output of controller is generally used as the input of a plant But the undesired noise is included in the output of a controller. Therefore, there is a need to use a precompensator for rejecting the undesired noise and improving the response characteristic of a system. In this paper, the design method of a precompensator is proposed for the model following control in the I-PD control system. The proposed precompensator is implemented with a neural network. The games of a precompensator are adjusted automatically to obtain a desired response of a system when the response characteristic of a system is changed under a condition.

Output-Feedback Input-Output Linearizing Controller for Nonlinear System Using Backward-Difference State Estimator (후방차분 상태 추정기를 이용한 비선형 계통의 입출력 궤환 선형화 제어기)

  • Kim, Seong-Hwan;Park, Jang-Hyun
    • Journal of IKEEE
    • /
    • v.9 no.1 s.16
    • /
    • pp.72-78
    • /
    • 2005
  • This paper describes the design of a robust output-feedback controller for a single-input single-output nonlinear dynamical system with a full relative degree. While all the previous research works on the output-feedback control are based on dynamic observers, a new state estimator which uses the past values of the measurable system output is proposed. We name it backward-difference state estimator since the derivatives of the output are estimated simply by backward difference of the present and past values of the output. The disturbance generated due to the error between the estimated and real state variables is compensated using an additional robustifying control law whose gain is tuned adaptively. Overall control system guarantees that the tracking error is asymptotically convergent and that all signals involved are uniformly bounded. Theoretical results are illustrated through a simulation example of inverted pendulum.

  • PDF

The design of the expanded I-PD Controller with the Neuro-precompensator (신경망 전치보상기를 갖는 확대 I-PD제어기의 설계)

  • 하홍곤
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.3
    • /
    • pp.619-625
    • /
    • 2000
  • A many control techniques have been proposed in order to improve the control performance of the discrete-time domain control system. In the position control system, the output of a controller is generally used as the input of a plant but the undesired noise is included in the output of a controller. Therefore there is a need to used a precompensator for rejecting the undesired noise. In this paper, The expanded I-PD control system with a precompensator is constructed. The precompensator and I-PD controller are designed by a neural network and these coefficients are changed automatically to be a desired response of system when the response characteristic of system is changed under a condition.

  • PDF

Analysis and Improvement of Time Sampling effects on Singular Perturbation based Control Systems - Its Aplication to Design of Singular Pertubation based STT Missible Digital Autopilot (특이섭동 기법 기반 제어 시스템에 대한 샘플링 영향 분석 및 개선 - 특이섭동 기법 기반 STT 미사일 디지털 자동조정장치 설계에의 적용)

  • Jeong, Seon-Tae
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.37 no.3
    • /
    • pp.33-43
    • /
    • 2000
  • The guarantee of the fast dynamics stability is essential for successful application of singular Perturbation technique to control systems design. Even though the fast dynamics of the control systems is rendered stable by an analog controller, the fast dynamics stability of the control systems resulted from an digital implementation of the analog controller can be impaired severely. In this paper, we first investigate the time sampling effects on singular perturbation based control systems by centering on a design example of recently developed singular perturbation based STT missile autopilot with high performance. The investigation shows that the stability margin the fast dynamics of the STT misile autopilot system decreases rapidly as the sampling interval of discretizing the analog autopilot increases. Under this analysis, we propose a composite digital controller with compensation for the decreasing stability margin of the fast dynamics due to time sampling to achieve better performance with respect to sampling time. The improved performance of the proposed composite digital controller is verified by simulation. This result shows that one needs to investigate time sampling effects in the digital implementation of singular perturbation based controllder, and then can have benefit from the investigation.

  • PDF

Self -Tuning Scheme for Parameters of PID Controllers by Fuzzy Inference (퍼지추론에 의한 PID제어기의 파라미터 Tuning의 구성)

  • 이요섭;홍순일
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.4 no.4
    • /
    • pp.52-57
    • /
    • 2003
  • A PID parameter tuning method was presented by the fuzzy singleton inference, based on step response-shaping of plant and experience knowledge of expert. The parameter-tuning has tow levels. The higher level determines modified coefficients for the controller based on operator's tuning know-how for characteristics of plant which can not be modeled. The lower level determines specified coefficients based on characteristics of response by Ziegler-Nickel's bounded sensitivity method. The last level parameters tuning of a PID controller is adjusted which the modified and specified coefficients makes adjustment rule, and is adjusted the proper value to each parameters by fuzzy singleton inference. Moreover, proposed the tuning method can reflex exporter knowledge and operator's tuning know-how and fuzzy singleton inference is rapidly operated.

  • PDF