• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.146-146
• /
• 2003

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3376-3382
• /
• 2014

The system developed inspects automatically defects existing on an inner surface of anodically treated aluminum cylinder-tubes. This system consists of automatic inspection software, and electronic endoscope and a conveyor moving device. By applying the optimal brightness conditions to searching for various defects on the inner surface of cylinder tube, the recognition rate of major defects, such as scratch, oxide and weld line reached 99%. If the present visual inspection process is replaced with the automatic defects inspection system, the physical fatigue of the operator could be reduced and the productivity could be increased. The automatic inspection system developed could also improve the quality of the products.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.397-408
• /
• 2009

Image training is a very important yet difficult state for automated visual inspection using computers. Because the size of parts for the recently produced PCB (Printed Circuit Board) becomes smaller and circuit patterns gradually become more complex, a difficult and complex training process is becoming a big problem within an industry where development cycle for new products is short and various products must be inspected. This research produced a reference image by using CAD (Gerber) file which becomes a standard for PCB automatic visual inspection. Reference image from a Gerber file guarantees PCB patterns with no defects. Through system implementation and experimentation, Gerber file is used in order to propose a plan which allows an easy training process for PCB automatic visual inspection system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.371-377
• /
• 2004

As the turbine running duration in nuclear power plants increases, cracks have been found in the pin finger type blade root area. The nondestructive examination for the blade root area has been carried out by manual ultrasonic examination during the overhaul period, but because of necessity to improve the reliability, we developed an automatic ultrasonic examination system and technique. To demonstrate the performance of the developed automatic ultrasonic examination system, low pressure turbine blades in the 2nd and 3rd stages of nuclear power plants were examined using the developed system. Its applicability nuclear power plant turbine roots of various types was also confirmed.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.115-120
• /
• 2001

본 논문에서는 비닐 튜브의 결함검사에 이용하기 위한 이진화 임계치의 자동 결정방법과 패턴매칭에 이용되는 패턴 모델의 자동 친정방법에 대하여 기술한다. 256 Gray 영상을 받아 들여 이진화 임계치를 결성하기 위해서, 휘도치 분포 곡선에서 2개의 극대값을 찾고, 두 극대 위치의 중간위치를 이진화 임계치로 결정하는 방법을 이용하였다. 그리고 패턴 모델을 생성하기 위하여는 수직, 수평 방향의 누적함(Profile)을 이용하였다. 이 방법은 인쇄물 검사 시스템뿐 아니라 비슷한 휘도치 분포를 같는 반도체 자동 검사 시스템을 비롯한 일반적인 건사 시스템에 적용이 가능하다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.334-336
• /
• 2001

반도체 제조와 같은 대량 생산 시스템에서 제품 검사는 매우 중요란 단계 중의 하나이다. 반도체 제조 공정 내에서의 시각 검사는 현재 사람의 육안에 주로 의존하고 있으나, 회로가 점점 복잡해지고 작아지는 추세에 비추어 볼 때 사람에 의한 시각 검사는 한계에 이를 것으로 보인다. 본 연구에서는 웨이퍼상의 결함을 자동으로 검출하고 검출된 길함을 분류하는 자동시각검사 시스템을 설계 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.314-315
• /
• 2007

자동차용 부품인 밸브씰 비전 검사 시스템을 개발하였다. 구성부품은 8 대의 독립형 CCD 카메라, 검사를 위해 밸브씰을 공급해 주는 기구장치 및 검사 모니터링 시스템으로 구성되었다. 밸브씰의 대표적인 불량 유형 1가지에 대한 영상처리 알고리즘을 제안하고, 알고리즘의 효율성은 실험을 통하여 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1155-1160
• /
• 2017

This paper describes a system implementation for the automatic inspection on the ventilating electronic device based on the reliability improvement. To be enhancement, the inspection error is minimized by the automatic inspection system on the ventilating apparatuses against the manual inspecting system. The system consists of the control system, software structure and monitoring system to be scanning the inspection processing. The inspection system for reliability improvement is evaluated in Gage Repeatability and Reproducibility. The experimental results are improved about 2 times inspecting speed, measured error ${\pm}0.02V$, effectiveness of discriminating performance 15%, missing probability 17% and false alarm probability 12% respectively in comparing with the manual inspection based on the wind pressure sensor. The system will be also improved more by making database and product bar codes for the total quality control system to the effective reliability enhancement in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.331-338
• /
• 2008

Ultrasonic testing for welds is widely used to ensure the integrity of facilities in NPPs. Automated ultrasonic testing(AUT) is more consistent than the manual ultrasonic testing(MUT). It can scan welded parts, examines the scanned images, and saves the results as data files. AUT in NPPs is making use of commercial systems, and there has been some difficulties in calibration of the system. An AUT system is developed. It comprises of pulser/receiver, scanner and a control program(SonicWizard). The performance demonstration for piping welds in NPPs and the piping wall thickness measurement on site were conducted to verify this system. The test results of the ultrasonic testing system developed is satisfactory and effective.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.859-861
• /
• 2005

레이저 프린터의 드럼 자동시각 검사 시스템은 사람의 육안 검사를 자동화함으로써 정확하고 신속한 제품 검사가 가능하도록 한다. 또한 검사 결과를 데이터베이스화함으로써 지속적인 불량 발생 요인을 찾아 조치할 수 있어 불량률 감소와 제품 신뢰도 향상을 도모할 수 있다. 본 연구에서는 레이저 프린터 드럼의 표면에 발생하는 결항을 자동으로 검사하는 시각 검사 시스템을 구현하였고 이를 적용하여 신속하고 정확한 검사가 가능함을 보였다.