• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.523-529
• /
• 2021

This paper shows the design and fabrication of antenna embedded in marine buoy for marine IoT service, especially automatic identification system of fishing gears. Frequency band of proposed antenna has dual band of 433 MHz and 920 MHz considering marine IoT extension. Dual pattern monopole type for 920 MHz and meander type for 433 MHz are adopted in the proposed antenna. Voltage standing wave ratio is obtained 1.548 at 433 MHz and obtained 1.5 of mean value at 920 MHz band by measuring the fabricated antenna. The maximum antenna gain of 3.83 dBi is measured at 902 MHz among 920 MHz band, while antenna gain of 433 MHz is obtained 1.18 dBi. Although antenna gain of 433 MHz is low than 920 MHz band, this gain is larger than desired value of -5 dBi. And, it is confirmed that other measured values meet the performance criteria for archiving communication distance of 10 km between marine buoy and fishing ship in automatic identification system of fishing gears.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.177-183
• /
• 2006

IMO and ITU-R have done an intensive study to develop performance standards and technical standards of maritime digital communication systems, respectively. In particular, each administration strives to develop new agenda items of adopting digital new technologies. IMO COMSAR submitted draft performance standard of LRIT to IMO MSC, so that IMO mandates carriage requirement of LRIT In addition to that, COMSAR is preparing performance standard of AIS-SART, and approved the utilization of mobile phones for SAR activities. On the other hand, a new agenda item concerning E-navigation strategy was submitted to MSC 81th meeting. These challenges toward enhanced maritime radio communication systems would make it change largely the concepts of traditional navigation We suggest future directions of maritime information communication systems, investigating the study results of IMO and ITU-R.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.163-172
• /
• 2010

The free viewpoint video delivers an active contents where users can see the images rendered from the viewpoints chosen by them. Its applications are found in broad areas, especially museum tour, entertainment and so forth. As a new free-viewpoint application, this paper presents a stereoscopic free-viewpoint TIP (Tour Into Picture) where users can navigate the inside of a single image controlling a virtual camera and utilizing depth data. Unlike conventional TIP methods providing 2D image or video, our proposed method can provide users with 3D stereoscopic and free-viewpoint contents. Navigating a picture with stereoscopic viewing can deliver more realistic and immersive perception. The method uses semi-automatic processing to make foreground mask, background image, and depth map. The second step is to navigate the single picture and to obtain rendered images by perspective projection. For the free-viewpoint viewing, a virtual camera whose operations include translation, rotation, look-around, and zooming is operated. In experiments, the proposed method was tested eth 'Danopungjun' that is one of famous paintings made in Chosun Dynasty. The free-viewpoint software is developed based on MFC Visual C++ and OpenGL libraries.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.496-503
• /
• 2022

In the reality that the fishing population is decreasing and the single-man fishing vessels is increasing, mandatory equipment for navigation and radio equipments for the safety of fishing boats has continued to be added. Therefore, many equipment such as navigation, communication and fishing are installed in the narrow steering room, so it is very confusing and a number of monitors are placed in the front, which is a factor that degrades the function of maritime observation. To solve this problem, we studied an interface that integrates and operates to major radio facilities such as very high frequency-digital selective calling equipment (VHF-DSC), automatic identification system (AIS) and fishing boat location transmission device (V-pass) into one multi function display (MFD) based on LAN. In addition, IEC61162-450 UDP packets and IEC61162 sentence were applied to exchange data through link between MFD and radio equipments, and additional messages needed for each equipment and function were defined. The integrated MFD monitor is easily operated by the menu method, and the performance of the interface was evaluated by checking the distress and emergency communication functions related to maritime safety and the message transmission status by equipment.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.433-440
• /
• 2021

The problem of maritime accidents due to the carelessness of fishing vessels, which is affected by the aging of fishing vessel operators. And there is navigation, communication and fish finder that is installed inside the narrow bridge of a fishing vessel. Therefore these system are monitors as many as of each terminal, which is bad influence on obscuring view of front sea from a fishing vessel bridge. In addition a large problem, it is occurs to reduce of the information recognition ability due to the confusion, which is can not check the display information each of screen equipments. Therefore, there has been demand to simply integrated the equipment, and it has wanted the integrated support system of these equipment. The display must be provided on a fishing vessels such as electronic charts, communications equipments and fish detection into one case. In this paper, the integrated system will be installed the GPS plotter, AIS, VHF-DSC, V-pass, fish finder and power supply in the narrow wheelhouse on a fishing vessel, which is configured in one case and operated by multi function display (MFD). The MFD is integrated to simplify for several multi terminals and provided necessary information on a single screen. This integration fishery support system will has improved in sea safety operation and fishery environment of fishing vessels by this implementation.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.137-145
• /
• 2024

Recently, there has been an increase in the use of Automatic Identification Systems. Class A AIS is used for ships engaged in international voyages, while Class B AIS is utilized for smaller vessels navigating domestic coastlines. AtoN AIS is used for aids to navigation, AIS is employed for search and rescue aircraft, and AIS-SART is widely used worldwide. Accordingly, in 2022, the Maritime Safety Committee(MSC) of the International Maritime Organization(IMO) revised the performance standards for the satellite emergency positioning radio beacon(EP IRB) to include AIS signals along with 121.5 MHz for aircraft, which has been used as a homing signal. It was recommended to use together as a homing signal, and from July 1, 2022, it was decided that AIS-EP IRB that satisfies the revised performance standards will replace the existing EP IRB. Consequently, starting from July 1, 2022, it was decided that AIS-EPIRB, which meets the revised performance standards, will replace the existing EP IRB. This paper aims to verify the feasibility of implementing AIS-EPIRB, which has not yet been developed domestically. To achieve this, a dedicated chipset for AIS was used to additionally implement frequency generation of 161.975 MHz and 162.025 MHz and GMSK modulation to satisfy the requirements.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.321-329
• /
• 2000

Welding is essential for the manufacture of a range of engineering components which may vary from very large structures such as ships and bridges to very complex structures such as aircraft engines, or miniature components for microelectronic applications. Especially, a domestic situation of the welding automation is still depend on the arc sensing system in comparison to the vision sensing system. Specially, the gap-detecting of workpiece using conventional arc sensor is proposed in this study. As a same principle, a welding current varies with the size of a welding gap. This study introduce to the fuzzy membership filter to cancel a high frequency noise of welding current, and ART2 which has the competitive learning network classifies the signal patterns the filtered welding signal. A welding current possesses a specific pattern according to the existence or the size of a welding gap. These specific patterns result in different classification in comparison with an occasion for no welding gap. The patterns in each case of 1mm, 2mm, 3mm and no welding gap are identified by the artificial neural network.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.59-64
• /
• 2005

The AIS(Automatic Identification System) is the useful equipment in order to promote the maritime safety and real time monitoring at the sea. In this study, the plan to construct the ubiquitous Aids to navigation is proposed In order to verify the construction of ubiquitous Aids to navigation, the experiment on the sea was carried out and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.835-840
• /
• 2004

Using of small Radar device can not supply the real exercise information of ellipse circumference or CPA, TCPA and the changing of surroundings fur various target information. Therefore, for the above problem, we develop RTE that is able to and of for each information from ARPA Radar which supply analog video signal, trigger bearing and heading pulse from low-cost small Radar device is equiped with general small fishing boat. The small fishing is equipped with small Radar device, so it is able to collect and apply sailing information such as real exercise information and TCPA.