• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.5
• /
• pp.350-354
• /
• 2009

To optimize the performance of software programs, it is important to know certain hardware parameters such as the CPU speed, the cache size, the number of TLB entries, and the parameters of the memory subsystem. There exist several ways to obtain the values of various hardware parameters. Firstly. the values can be taken from the hardware manual. Secondly, the parameters can be obtained by calling functions provided by the operating systems. Finally, hardware detection programs can find the desired values. Such programs are usually executed on PC or server systems and report the CPU speed, the cache size, the number of TLB entries, and so on. However, they do not sufficiently detect the parameters of one of the most important parts of the computer concerning performance, namely the memory bank layout in the memory subsystem. In this paper, we present an algorithm to detect the memory bank parameters. We run an implementation of our algorithm on various embedded systems and compare the detected values with the real hardware parameters. The results show that the presented algorithm detects the cache size, the number of TLB entries, and the memory bank layout with high accuracy.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.405-413
• /
• 2000

This study was conducted to develop an on-line monitoring system for a forest hydrological environment and its meteorological condition, such as temperature, wind direction and speed, rainfall and water level on V-notch, electrical conductivity(EC), potential of hydrogen(PH) by the motor drive sensor unit and measurement with a single-chip microprocessor as controller. These results are summarized as follows ; 1. The monitoring system consists of a signal process unit, motor drive sensor unit, radio modem unit and power supply. 2. The motor drive sensor unit protects the sensor from swift current or freezing and can constantly maintain fixed water level during measurements. 3. This monitoring system can transfer the data by radio modem. Additionally, this system can monitor hydrological conditions in real time. 4. The hardware was made of several modules with an independent CPU. They can be mounted, removed, repaired and added to. Their function can be changed and expanded. 5. These are the result of an accuracy test, the values of temperature, EC and pH measured within an error range of ${\pm}0.2^{\circ}C$, ${\pm}1{\mu}S$ and ${\pm}0.1pH$ respectively. 6. This monitoring system proved to be able to measure various factors for a forest hydrological environment in various experimental stations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.340-347
• /
• 2008

Ubiquitous services are high quality and differentiated services which are provided for users by recognizing the context of users and environmental conditions actively. In this case, context-aware middleware is one of the most important technologies required to implement the ubiquitous services. In this paper, we propose a method for providing ubiquitous services in a specific user space effectively and monitoring human bio-sensors. That is, the design and implementation of intelligent home service middleware and monitoring bio-sensors based on context awareness is discussed here. Context information from various sensors is gathered, and suitable services are inferred and provided to users by the middleware system. In our approach, user services can be modelled easily by using facts and rules, and the system can be extended easily to support various ubiquitous services other than intelligent home services also. The system can be integrated with external applications and legacy systems effectively by using various protocols such as RMI, socket and HTTP, XML and etc. We have designed and evaluated various facts and rules for intelligent home services in real environments. Functionality evaluation with the system shows that ubiquitous services can be provided to users effectively in a home environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.453-453
• /
• 2023

상수관망의 수질사고와 이상상황 발생시 대응을 위해서는 급수구역에 설치되어 있는 자동수질측정기, 정밀여과장치, 재염소주입설비, 자동드레인 등의 계측·제어설비들 간의 유기적인 정보공유를 통한 제어를 필요로 한다. 스마트 상수관망 운영플랫폼은 이러한 인프라 시설의 운영방안을 고려하여 분산되어 있는 계측데이터를 통합감시 및 제어하는 시스템으로 개발되었다. 상수관망 운영플랫폼은 능동형 분석 제어기술을 도입하여, 스마트 상수관망 인프라 설비를 최적제어할 수 있도록 구현하였다. 통합운영 플랫폼은 PostgreSQL, PostGIS, GeoServer, OpenLayers 등의 기술을 활용하여 개발하였다. 플랫폼은 계측감시, 시설관리, 운영제어 등의 기능으로 구성되며, 상수도 업무지원을 위한 관망해석 및 네트워크 분석 기능을 지원한다. 본 시스템은 스마트 상수도 구축사업을 통해 구축한 유량·수질모니터링 장비와 수질관리를 위해 도입된 재염소, 자동드레인 설비의 운영상태를 실시간 조회하는 모니터링 프로그램과, 관망해석 프로그램 그리고 대상설비의 최적제어를 위한 운영관리 프로그램으로 구성되어 있다. 모니터링 프로그램은 현장에서 측정되고 있는 유량, 수압, 수질, 펌프운전 등의 상태를 실시간으로 감시하고 클라우드 데이터베이스에 저장·관리하는 기능을 수행한다. 관망해석 프로그램은 EPA_Net모형과 연계되어 관망수리·수질해석을 수행하는 부분으로 재염소설비의 염소 추가주입이나 자동드레인을 통한 배제시 나타나게되는 관의 수리·수질변화를 클라우드 컴퓨팅 환경에서 분석하고 결과를 가시화 하는 기능을 갖고 있다. 운영관리 프로그램은 재염소 주입이 필요할 경우 주입량의 산정하는 부분과 관망 파손이나 수질사고 발생시 최적 단수예상지역을 도출하는 기능을 보유하고 있다. 향후 스마트 상수관망의 능동형 수질관리를 추진하는 지자체에 도입하여 인프라운영관리 기술 확보 및 수질관리 능력 개선과 실시간 감시 및 위기 대응능력 향상에 기여할 것으로 기대된다.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.41-56
• /
• 2017

This study is an intensive study on Tae Rin Lee's research results. A linear system for Estimating the Strength of Super Personal Conflict (ESSPC) in animations is proposed. Tae Rin Lee has extracted the Super Personal Conflict (SPC) shots of animations, and obtained the strength through the experts' psychological test experiment. The purpose of this study is to find a model that automatically computes the superpersonal conflict intensity value (ESSPC). By utilizing these results, 1) 20 image feature vectors are suggested for analyzing the SPC, and 2) a linear system is found for auto-calculating ESSPC by using the pseudo inverse matrix. The proposed system shows 9.25% root mean square error and the effectiveness is proven.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.2
• /
• pp.104-115
• /
• 2002

Core is the main component of inductor. This core should be classified into around 10 classes according to the value of inductance and Q. The coil should be winded with the outer-boundary of this core by different number of turns. Theses kind of precise inductors would be required in the future environment which PCs and communication devices demand more high speed and lower voltage level. It would be quite unefficient that only one core is classified once a time. There, it will be developed so that 10 cores are classified simultaneously. For the operation of classifying 10 cores once in a time, suppose 10 test instruments could be used. In this case, it would take much cost since a test instrument Is expensive. So, by using only one test instrument, it is really more desirable that this system is developed. Each core classified by 10 different classes is to be stored into the corresponding box through the corresponding rubber hose. 10 cores are passed on a serial line and are placed on each testing slot. Here, each core located at each slot is tested, and then the bowl located on the top of a step motor is moved into the corresponding spot by rotating step motor with some angles. Each bowl connected with the corresponding box through rubber hose. Actually 100 hoses are connected, 10 step motors are rotated at 10 different angles, so the size is really so big, the shape of connecting 100 hoses is so complicated. Therefore it is anticipated that the system would be going to be easily out of ordered. In this paper the main purpose is to make several suggestions to be able to work well in these kinds of being affected by the abnormal operation of motors and the flow of cores.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.434-440
• /
• 1993

국제경쟁력 향상을 위한 주요채택전략으로 유연자동화제조시스템의 보급이 급격히 확대되고 있다. 그러나 시스템의 개발.제작과 운영을 담당할 기술자,기술관리자 및 고급기능인의 확보가 전제되지 않는한 성공적인 투자를 기대할 수가 없다. 본 논문에서는 이러한 담당자 양성시 필수과정인 연구개발실험 및 운영실습에 사용될 적정한 유연자동화제조시스템의 개발과정중 일부인 개념설계 및 Layout내용을 정리하여 보고한다. 기본적으로 적정비용으로 일반산업용과 동일한 기능 (Hardware는 경절삭산업용, 소프트웨어는 일반산업용)을 갖춘 시스템으로서 실험 침 실습에 들어가는 비용도 최소화할 수 있도록 설계한다. 또한 System Controller는 시스템 성능향상과 무인가동시간확장에 필요한 소프트웨어 (공구상태감시, 자동측정 및 보정,Dynamic Scheduling등) 의 개발과 실험이 용이하도록 구성하고,산학연 공동연구체제를 구축하여 지속적인 개발이 가능케 한다. 필요시 모든 Source Program도 공개할 예정이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.283-283
• /
• 2004

공장자동화는 국제사회 속에서 살아 남기 위한 필수 요건이 되었다. 값싼 인건비를 무기로 제품 경쟁에 뛰어 들고 있는 주변국가와 경쟁하기 위해서는 인건비 절감과 품질 향상이 필수적이다. 본 논문은 POS용 키보드의 생산공정 중에서 조립된 키보드 칼라 라벨을 자동 검사하는 시스템 개발을 최종목표로 하였다. 현재, 산업용으로 폭 넓게 사용되고 있는 머신 비전 측정시스템은 흑백의 영상과 비교적 간단한 물체에 초점을 맞추고 있다. 그러나, Fig.1의 POS용 키보드는 일반 컴퓨터용 키보드와는 달리 각각의 키가 칼라 라벨로 되어있기 때문에 기존의 흑백 머신 비전 시스템으로 자동화를 구축하기는 힘들다.(중략)

• Annual Conference of KIPS
• /
• 2013.05a
• /
• pp.842-845
• /
• 2013

본 연구에서는 골프 피팅 장비인 스윙 피팅 장비, 바디 피팅 장비, 클럽 피팅 장비 같은 다양한 골프 피팅 장비들의 데이터를 컨트롤러로 연동한다. 이 과정에서 RS-232C통신을 통해 클럽 마스터 프로그램 서버와 통신하는 시스템을 설계한다. 클럽마스터 서버는 자동으로 데이터를 수집, 저장, 분석하여 알맞은 결과를 표출하기 위한 시스템이다. 측정된 데이터를 클럽 마스터 서버에 제공하기 위해 피팅 장비 복합기 연동시스템의 새로운 클럽 피팅 마스터 시스템 모델 설계를 제안한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.