• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.986-993
• /
• 2012

The objective of this study is to investigate performance characteristics of the thermal management system for passenger hydrogen fuel cell vehicle under various operating conditions. The thermal management systems comprised of a stack cooling system, an electric device cooling system and an air conditioning system for a passenger room were tested with driving conditions. As a result, in highway driving mode, the cooling performance of the stack cooling system with air conditioning on condition was 28.8 % lower than that of the air conditioning off condition. And cooling load of the electric cooling system in the city driving mode was 65.6% higher than that of the highway driving mode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5457-5463
• /
• 2011

The objective of this study is to investigate cooling performance characteristics of mobile air conditioning system using R744 as an alternative of R-134a. In order to analyze the cooling performance characteristics of the air conditioning system using R744 for a passenger vehicle, the developed air conditioning system using R744 was applied in a real passenger vehicle and tested under various operating conditions with the variation of gas-cooler inlet air conditions, evaporator inlet air temperatures and compressor speeds. As a result, cooling capacity and coefficient of performance (COP) of the tested air conditioning system decreased with the rise of the inlet air temperature of the gas cooler but increased with the rise of the inlet air temperature of the evaporator. In addition, cooling capacity and coefficient of performance (COP) increased by 42.2 % with the rise of the compressor speed from 900 rev/min to 1800 rev/min, but it decreased by 55.4%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5430-5437
• /
• 2011

The objective of this study is to investigate the cooling performances of the electrical air-conditioning system using electric driven scroll compressor for zero emission passenger vehicles. This air conditioner with air source was used R-134a as a refrigerant and installed in a real zero emission passenger vehicle for tests under various driving conditions. The cooling performance of the electrical air conditioner was affected by driving velocities and conditions of the tested vehicle. The condensing rate of the condenser during driving is better than that of the idle condition. The average cool down temperature in the cabin room decreased on average $5.2^{\circ}C$ with the increase of the outdoor temperature from $20.0^{\circ}C$ to $30.0^{\circ}C$. In addition, the cooling performances were sufficient for cooling loads of the tested passenger car under tested conditions.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.29 no.9
• /
• pp.75-78
• /
• 2000

환경친화적 자동차에 대한 관심이 커질수록 여러 분야에서 시스템 설계의 영향을 더욱 더 잘 이해하려는 노력이 진행되고 있다. 자동차용 냉방기의 경우 냉방시스템의 세밀한 분석과 환경에 미치는 영향을 최소화하기 위한 설계가 이루어지고 있다. 그 중에서도 냉매의 선택과 그 냉매의 환경적 영향에 대한 자세한 연구가 필요하다. 몬트리올 조약 이후 자동차 산업계는 대부분 R-134a를 채택하고 있는데 이는 R-134a가 오존층을 파괴하지 않을 뿐 아니라 적절한 사이클 효율을 가지면서 안전하고 비독성이며 불연성이기 때문이었다. 최근 지구온난화와 이산화탄소($CO_2$)의 발생원에 대한 관심은 산업계가 사용냉매를 재검토하게 하는 계기가 되었으며, R-134a도 교토 조약의 규제냉매에 속해 있어 자동차용 냉방기의 대체냉매에 대한 연구가 시급하다고 여겨지고 있다. R-134a와 관련된 주된 논점은 냉매 누설시의 영향이다. R-134a의 지구온난화지수(GWP)는 1,300인데, 이는 누출되었을 때 1,300배의 이산화탄소가 누출된 것과 동일하다는 것을 의미하다. 최근 자연냉매의 선호와 맞물려 냉매로서 이산화탄소의 평가에 많은 관심이 모아지고 있다. 본 글에서 자동차용 냉방기의 대체냉매로서 이산화탄소의 상대적인 장점과 R-134a와의 비교에 대해 수행된 연구결과를 나타내었다.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.681-686
• /
• 2006

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2's$ unique propel-ties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, dynamic models of a $CO_2$ air-conditioning system were developed by using experimental data. Control algorithms for a high-side pressure control and an indoor air temperature control were developed and analysed by using the dynamic simulation program of a $CO_2$ system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.419-425
• /
• 2019

The objective of this study was to investigate the cooling performance characteristics of a hybrid refrigeration system in a heavy duty vehicle. The tested hybrid refrigeration system had additionally an electric compressor besides the present mechanical compressor for selective use according to the operating conditions. The applied electric compressor was a scroll type and with 18.0 cc displacement. In order to analyze the performance characteristics of the hybrid refrigeration system with respect to the cooling capacity and Coefficient of Performance (COP), other components, including two different types of compressors, were installed and tested under various operating conditions such as compressor speed and air flow rate of the evaporator. When the electric compressor was operated at 4,500 rev/min, the cooling capacity was about 4.0kW and COP was 3.5. When the mechanical compressor was operated, whereas the cooling capacity was higher than the electric controlled compressor, COP was lower due to the larger displacement and higher power consumption. To analyze the hybrid system operating characteristics due to reasonable cooling capacity with electric compressor operation, the mechanical compressor and electric compressor were operated by turns every 10 minutes under certain system operating conditions. Because surge pressure occurred when both compressors were switched on, the operating strategy required some time to balance the system pressure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.49-58
• /
• 2006

In the respect of the environmental protection viewpoint, $CO_2$ may be one of the most attractive alternative refrigerants for an automotive air-conditioning system. For the development of control algorithm of a $CO_2$ automotive air-conditioning system, characteristics of a $CO_2$ refrigerant should be considered. The high-side pressure of a $CO_2$ system should be controlled in order to improve the system efficiency. In this study, dynamic physical models of a $CO_2$ system were developed and dynamic behaviors of the system were predicted by using these models. Control algorithms of a $CO_2$ system were also developed and the effectiveness of these algorithm was verified by using dynamic models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2545-2552
• /
• 2014

This study is aiming to suggest the effective thermal management system design technologies for the high voltage and capacity battery system of the electricity driven vehicles and introduce the theoretical designing methods. In order to investigate the effective operation of the battery system for the electricity driven vehicles, the heat generation model for Li-ion battery system using the chemical reaction while charging and discharging was suggested and the thermal loads of the heat sources (air or liquid) for cooling and heating were calculated using energy balance. Especially, the design methods for the cooling and heating of the battery system for maintaining the optimum operation temperature were investigated under heating, cooling and generated heat (during charging and discharging) conditions. The battery thermal management system for the effective battery operation of the electricity driven vehicles was suggested reasonably depending on the variation of the season and operation conditions. In addition, at the same conditions under summer season, the cooling method using the liquid and active cooling technique showed a relatively high capacity, while cooling method using the passive cooling technique showed a relatively low capacity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.70-76
• /
• 2003

An experimental study was performed to understand the heat transfer and fluid dynamic characteristics of Sub-Cooled Hybrid Condenser (SCHC), which conventional condenser and receiver dryer are integrated into. SCHC also employs a sub-cooled refrigerant passages at the end of the condenser in order to supply perfect liquid refrigerant to the expansion unit. Throughout the present study, it was found that the developed SCHC increases in the degree of sub-cooling by 10~100% compared to conventional condenser. The excessive sub-cooling has improved the cooling performance by 10%, and that leads reduction in evaporator outlet air temperature by $1.5^{\circ}C$. Also found through the study is that the refrigerant pressure drop across SCHC is fairly increased due to insertion of the desiccant cartridge in the receiver tank which is composed of zeolite, filter and supporter plate.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1286-1287
• /
• 2011

최근 친환경 교통수단중 하나인 전기자동차 보급을 위한 정부정책이 강화되고, 관련연구개발 및 시범사업, 실증이 이루어지고 있다. 하지만 아직까지 국내에서는 본격적인 전기자동차 생산단계에 이르지 못하고 있고, 전기자동차 배터리에 전력을 공급하는 충전인프라 구축도 미흡한 실정이다. 전기자동차와 충전인프라는 마치 일반자동차와 주유소와의 관계와 비슷하여 전기자동차 운행을 위해 충전인프라 구축은 필수적이다. 그런데 보통 충전인프라는 전력계통, 충전기와 운영시스템 등으로 구분할 수 있다. 이 가운데 충전기는 전력을 계통으로부터 수전 받아 차량의 배터리에 공급하는 역할을 담당하며, 특히 급속 충전기의 경우 380V, 85의 교류전력을 수전하여 최대 110A, 450V 직류를 공급하는 관계로 충전 중 내부온도관리가 중요하다. 이를 관리하기 위해 적절한 냉방설비 확보, 충전전력 조정 혹은 발열원(부품) 개선 등의 방법이 있으며 이에 관해 상세히 논해보고자 한다.