• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.147-155
• /
• 2024

Gallium-68-prostate-specific membrane antigen-11 (⁶⁸Ga-PSMA-11) is a positron emission tomography radiopharmaceutical that labels a Glu-urea-Lys-based ligand with ⁶⁸Ga, binding specifically to the PSMA. It is used widely for imaging recurrent prostate cancer and metastases. On the other hand, the preparation and quality control testing of ⁶⁸Ga-PSMA-11 in medical institutions takes over 60 minutes, limiting the daily capacity of ⁶⁸Ge/⁶⁸Ga generators. While the generator provides 1,110 MBq (30 mCi) nominally, its activity decreases over time, and the labeling yield declines irregularly. Consequently, additional preparations are needed, increasing radiation exposure for medical technicians, prolonging patient wait times, and necessitating production schedule adjustments. This study aimed to reduce the ⁶⁸Ga-PSMA-11 preparation time and optimize the automated synthesis system. By shortening the reaction time between ⁶⁸Ga and the PSMA-11 precursor and adjusting the number of purification steps, a faster and more cost-effective method was tested while maintaining quality. The final synthesis time was reduced from 30 to 20 minutes, meeting the standards for the HEPES content, residual solvent EtOH content, and radiochemical purity. This optimized procedure minimizes radiation exposure for medical technicians, reduces patient wait times, and maintains consistent production schedules, making it suitable for clinical application.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.257-264
• /
• 1999

The trickling system for automatic and individual watering were made with Bunchungto, Ongito and Backjato. The thickness of ceramics were 1.0, 1.5, 2.0, 2.5 and 3.0mm. And they were fired in a muffle furnace at five different temperatures between 500 and 900'E during 12 hours. The upper plastic parts of sensor consisted of five elements made by steel mold. With the photo fiber sensor attached to datalogger, an accumulated amount of drops for every 10 minutes were recorded. The porosity is higher in the order of Bunchungto, Backjato and Ongito; also, as the firing temperature is higher and the thickness is thicker, the porosity is higher. The ceramic sensors consisted of $SiO_2$ of 54.17~71.62wt.%, A1$_2$ $O_3$ of 15.42~33.79wt.% and the rest of 10wt.%, those were Fe$_2$ $O_3$, CaO, MgO, Na$_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$. The pattern of dropping were changed according to the variety, thickness and firing temperature of ceramics. As the ceramics were made thicker, the fluctuation of dropping became more rapid, but it did not regularly work at 1mm thickness. As the firing temperature of ceramics became higher, the fluctuation of dropped amount became more rapid.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.121-121
• /
• 2017

오늘날 시장에 유통되는 버섯은 대부분 환경이 조절되는 시설 내부에서 재배된다. 버섯은 다른 식물과 달리 버섯의 종류, 품종 등에 따라 요구되는 환경이 매우 다르다. 특히 대부분의 버섯은 버섯이 생육되는 공간의 온도, 수분, 이산화탄소, 조도 등의 관리가 필수적이다. 버섯의 단위면적당 생산량을 극대화하기 위해서는 이들 버섯이 필요로 하는 환경을 버섯의 생육특성에 따라 적합하게 유지해 주어야만 한다. 현재 대부분의 버섯재배사에는 이들 환경을 컨트롤하는 장치가 설치되어 있고, 이들 시스템의 환경 설정은 농업인이 현장에서 버섯의 상태를 확인 한 후 그때그때 경험에 의해 채득한 정보를 기반으로 환경설정을 하고 있는 실정이다. 이렇다 보니 버섯을 재배하는 기간에는 농업인이 재배사 내부의 환경을 관리하기 위해서 항상 버섯재배사에 머물러야 하고, 재배사의 환경관리 때문에 원거리 또는 장기 출타가 어려운 실정이다. 본 연구에서는 기존에 사람이 버섯재배 현장에서 컨트롤하던 환경관리를 원격에서 컴퓨터 또는 모바일로 구현할 수 있는 시스템을 개발하였다. 시스템에서 모니터링 및 제어하는 환경은 온도, 습도, 이산화탄소, 배기팬 및 입기팬의 가동 등 버섯재배 환경관리에 필요한 모든 요소를 모니터링 및 관리할 수 있도록 하였다. 이들 관리 요소는 인터넷이 연결된 컴퓨터에 접속하여 버섯재배사의 환경을 실시간으로 모니터링 하고 필요에 따라 제어를 할 수 있도록 하였다. 또한 컴퓨터에서 볼 수 있는 환경을 스마트폰을 통해서도 볼 수 있고 또한 제어할 수 있도록 하였다. 그리고 버섯배지를 입상 한 후부터 수확시기까지의 관리 환경을 데이터베이스로 만들어 농민이 버섯배지를 입상하고 데이터베이스와 연동한 제어가 되도록 설정하면 버섯재배사 내부의 환경은 데이터베이스의 정보를 읽어 들여 버섯의 생육단계에 따라 자동으로 내부환경이 제어되도록 하였다. 또한 농업인이 원격에서 버섯재배사 내부 버섯의 생육상황을 모니터링 할 수 있도록 재배사 상부에 CCD 카메라를 달아 실시간으로 버섯의 생육상활을 모니터링 할 수 있도록 구성하였다. 이와 같은 시스템을 사용하면 버섯재배 경험이 없는 농업인도 경험자와 같은 재배관리가 가능하고 원격에서 재배사 내부환경을 모니터링하고 제어 할 수 있기 때문에 농업인이 재배사에 매여 있지않아도 될 것으로 판단된다.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.479-485
• /
• 1990

For the automation of a evaporation process, computer based evaporation system was built and applied to acquisition of the process variables with an centrifugal thin film evaporator(Centri-Therm, CT-1B). Controls of the process conditions were performed by computer system for pressure, feeding rate, steam, evaporation temperature and flow rate of cooling water. The data acquisitions were also performed by computer system for the changes in the concentration and temperature readings for steam, evaporation and cooling water at the both inlet and outlet. The control and the acquisition variables were collected through the interface device and analyzed by programs using the PASCAL language. To control the feeding rate during the concentration process, inverter was used. The cooling water for the vapor condensation was controlled by the valve controller and should be supplied with the flow rate of 125 kg/h. The maximum vapor condensation rate was 41.7kg/h at the feeding rate of 125 kg/h.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.526-534
• /
• 2010

This paper describes an algorithm which merges two HDR pictures taken under different exposure time to display on the LDR devices such as LCD or CRT. The proposed method does not generate the radiance map, but directly merges using the weights computed from the input images. The weights are firstly produced on the pixel basis, and then blended with a Gaussian function. This process prevents some possible sparkle noises caused by radical change of the weights and contributes to smooth connection between 2 image informations. The chrominance informations of the images are merged on the weighted averaging scheme using the deviations of RGB average and their differences. The algorithm is characterized by the feature that it represents well the unsaturated area of 2 original images and the connection of the image information is smooth. The proposed method uses only 2 input images and automatically tunes the whole internal process according to them, thus autonomous operation is possible when it is included in HDR cameras which use double shuttering scheme or double sensor cells.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.50-59
• /
• 2006

In this paper, We are going to propose the fire protection system using CAN(Controller Area Network). The larger, higher and deeper buildings an, the more dangerous people are when fire happens. We should be aware of the problems of prior fire protection system. Therefore, we construct the embedded system based on CAN communication that is capable of N to N communication, and build independent fire protection system. If the fire is occurred on the building, the problem is that how fast we can detect the fire and put it on by using available system, this is major factor that reduces damage of our wealth. Therefore in this studies, We would like to design more stable system than current system. This system is based on CAN communication which is available N to N communication constructs and designed to compensate for each fault, so that our aim is to reduce the wires of system, cost of installation and to suppose future type fire protection system.

• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.323-329
• /
• 2020

The purpose of this study is to investigate the effect of radiation shielding on the thyroid organ dose and image quality during Chest PA examination using automatic exposure control system. This study was conducted in the patient posture and examination conditions such as Chest PA using human model phantom. An experiment without shielding was set as a control group (non) and the cases of using paper coated with a contrast agent (contrast) and bismuth (bismuth) were used as experimental groups. Compared to non-shielded(non), the dose at bismuth increased about 7% in C(cervical vertebrae)5 and C6 and 14% in C7 and contrast showed dose increases of about 17 to 19% in C5 and C6 and about 21% in C7. As a result of the image quality comparison, when measured in the center of the cervical vertebrae, both SNR and CNR in bismuth increased about 40% higher than non, and contrast showed about 8 to 9% improvement. Compared with soft tissues of the cervix, bismuth reduced SNR by about 15% and CNR by about 13%, in contrast, SNR decreased by 11%, and CNR decreased by about 10%. In the Chest PA using AEC, the method of using the shield in front of the collimator has the advantage to observe the anatomical structure of the neck area well compared to the method using the lead. However, the dose at the neck can be increased by 7-21% depending on shielding materials.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.97-113
• /
• 1984

날씨가 더운지방에 소규모(小規模) 목장(牧場)들이 먼거리를 두고 산재(散在)되어 있는 경우, 각목장(各牧場)에서 생산(生産)된 우유(牛乳)를 수집(收集)해서 처리공장(處理工場)까지 수송하는 데는 많은 어려움이 있다. 현대화(現代化)된 우유처리공장(牛乳處理工場)이나 저온저장시설이 충분(充分)하지 못한 아열대지방(亞熱帶地方)에 위치(位置)한 발전도상국에서는 우유(牛乳)를 장시간(長時間) 수집(收集)하여 먼거리를 수송하는 동안 많은 양(量)의 우유(牛乳)가 부패 손실(損失)되고 있다. 이 문제를 해결(解決)하기 위하여, 그곳 현지목장(現地牧場)에 강하게 쪼이는 태양열(太陽熱)을 이용(利用)하는 것은 대단히 바람직 하다. 에너지 절약이나, 우유(牛乳)의 부패손실(腐敗損失) 막기 위하여, 태양열(太陽熱)을 이용(利用)한 소규모우유처리기(小規模牛乳處理機)를 개발하여 현지목장(現地牧場)에서 직접(直接) 우유를 처리(處理)하여 인근주민에게 공급하는 것이 가장좋은 해결방법이라 판단하고, 그 실현가능성을 확인(確認)하기 위하여 실제로 태양열(太陽熱)우유처리기(處理機) 개발(開發)을 위한 그 모형(模型)의 회로구성(回路構成)을 고찰(考察)한 결과(結果) 다음과 같다. 1. 태양열(太陽熱) 우유처리기(牛乳處理機)의 모형(模型)은 다음 4개(個)의 회로(回路)로 구성(構成)되었다. 가. 우유(牛乳)순환 회로(回路) 나. 가열회로(加熱回路) 다. 예냉회로(豫冷回路) 라. 냉각회로(冷却回路) 2. 우유가열회로(牛乳加熱回路)는 태양열(太陽熱)을 이용(利用)하였으며 냉각회로(冷却回路)는 압축식 냉각기(冷却機)를 이용(利用)하였다. 3. 자동제어(自動制御)시스템을 장치(裝置)하여 태양강도변화(太陽强度變化)에 따른 우유처리량(牛乳處理量) 조절(調節)을 자동화(自動化)할 수 있도록 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.732-736
• /
• 2016

Air conditioning part designs are moving towards higher efficiency and productivity. The expansion device is one of the core parts of an air conditioning system and controls the refrigerant quantity, evaporation load, compression capacity, and condensation capacity. In this study, an electronic expansion valve for two working fluids ($CO_2$ and R134a) was developed for air conditioning systems in vehicles. The valve uses an eccentric cam driving structure instead of a lead screw to decrease manufacturing costs and increase productivity. The pressure resistance and flow rate performance was evaluated using numerical analysis. At maximum operation conditions and burst pressure conditions with $CO_2$, the maximum stresses on the valve model were about 98 MPa and 223 MPa, respectively. The maximum flow rates of $CO_2$ and R134a with different orifice openings were about 550 kg/h and 386 kg/h, respectively. The performance with R134a was verified by experiments.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.271-277
• /
• 2019

CareDose 4D which is the Siemens's Automatic Exposure Control (AEC) can adjust the level of radiation dose distribution which is based on organ characteristic unlike other manufacturer's AEC. Currently, a wide scan range containing different organs is sometimes examined at once (defined as one scan). The purpose of this study was to figure out which organ characteristic option is suitable when one scan method is utilized. Two types of anthropomorphic phantoms were scanned in the same range which were from frontal bone to carina level according to three different organ characteristics such as Thorax, Abdomen, and Neck. All scans and image reconstruction parameters were equally applied and radiation dose were compared. Radiation dose with Thorax organ characteristic was lower than that with Neck. Also, that with Abdomen oran characteristic was lower than Thorax. There were significant differences in radiation dose according to different organ characteristics at the same parameters (P<0.05). Usage of Neck organ characteristic had a result of the highest radiation dose to all phantom. On the other hand, utilization of Abdomen organ characteristic showed the lowest radiation dose. As a result, it is desirable to set appropriate organ characteristic according to examined body part when you checkup patients. Also, when you implement one scan method, selection of Abdomen-based organ characteristic has reduced more radiation dose compared with two different organ characteristic.