• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.3
• /
• pp.220-237
• /
• 2021

Since the functional importance of marine phytoplankton was firstly advocated from early 1880s massive data on the species composition and abundance were produced by classical microscopic observation and the advanced auto-imaging technologies. Recently, pigment composition resulted from direct chemical analysis of phytoplankton samples or indirect remote sensing could be used for the group-specific quantification, which leads us to more diversified data production methods and for more improved spatiotemporal accessibilities to the target data-gathering points. In quite a few cases of many long-term marine ecosystem monitoring programs the phytoplankton species composition and abundance was included as a basic monitoring item. The phytoplankton data could be utilized as a crucial evidence for the long-term change in phytoplankton community structure and ecological functioning at the monitoring stations. Usability of the phytoplankton data sometimes is restricted by the differences in data producers throughout the whole monitoring period. Methods for sample treatments, analyses, and species identification of the phytoplankton species could be inconsistent among the different data producers and the monitoring years. In-depth study to determine the precise quantitative values of the phytoplankton species composition and abundance might be begun by Victor Hensen in late 1880s. International discussion on the quality assurance of the marine phytoplankton data began in 1969 by the SCOR Working Group 33 of ICSU. Final report of the Working group in 1974 (UNESCO Technical Papers in Marine Science 18) was later revised and published as the UNESCO Monographs on oceanographic methodology 6. The BEQUALM project, the former body of IPI (International Phytoplankton Intercomparison) for marine phytoplankton data QA/QC under ISO standard, was initiated in late 1990. The IPI is promoting international collaboration for all the participating countries to apply the QA/QC standard established from the 20 years long experience and practices. In Korea, however, such a QA/QC standard for marine phytoplankton species composition and abundance data is not well established by law, whereas that for marine chemical data from measurements and analysis has been already set up and managed. The first priority might be to establish a QA/QC standard system for species composition and abundance data of marine phytoplankton, then to be extended to other functional groups at the higher consumer level of marine food webs.

• (The) Research of the performance art and culture
• /
• no.32
• /
• pp.489-524
• /
• 2016

This study examines the birth of a genre, the $Sekky{\bar{o}}bushi$ Misemono Opera, focusing on how it accepted and modernized Katarimono $Sekky{\bar{o}}bushi$. Unlike earlier studies, it argues that Terayama was clearly different from other first-generation Angura artists, in that he rebirthed the medieval story $Sekky{\bar{o}}bushi$ as a modern Misemono Opera. Shintokumaru (1978) was directed by Terayama $Sh{\bar{u}}ji$, a member of the first generation of Japan's 1960s Angura Theatre Movement. It takes as its subject the Katarimono $Sekky{\bar{o}}bushi$ Shintokumaru, a story set to music that can be considered an example of the modern heritage of East Asian storytelling. $Sekky{\bar{o}}$ Shintokumaru is set in Tennoji, Japan. The title character Shintoku develops leprosy as a result of his stepmother's curse and is saved through his fiancee Otohime's devoted love and the spiritual power of the Bodhisattva Avalokitesvara. In this work, Terayama combined the narrative style of $Sekky{\bar{o}}bushi$ with J.A. Caesar's shamanistic rock music and gave it the subtitle 'Misemono Opera by $Sekky{\bar{o}}bushi$'. He transforms its underlying theme, the principle of goddesses and their offspring in a medieval religious world and the modori (return) instinct, into a world of mother-son-incest. Also, the pedestrian revenge scene from $Sekky{\bar{o}}bushi$ is altered to represent Shintokumaru as a drag queen, wearing his stepmother's clothes and mask, and he unites sexually with Sensaku, his stepbrother, and ends up killing him. The play follows the cause and effect structure of $Sekky{\bar{o}}bushi$. The appearance of katarite, a storyteller, propelling the narrative throughout and Dr. Yanagida Kunio is significant as an example of the modern use of self-introduction as a narrative device and chorus. Terayama $Sh{\bar{u}}ji^{\prime}s$ memories of desperate childhood, especially the absence of his father and the Aomori air raids, are depicted and deepened in structure. However, seventeen years after Terayama's death, the version of the play directed by Ninagawa Yukio-based on a revised edition by Kishida Rio, who had been Terayama's writing partner since the play's premier-is the today the better-known version. All the theatrical elements implied by Terayama's subtitle were removed, and as a result, the Rio production misses the essence of the diverse experimental theatre of Terayama's theatre company, $Tenj{\bar{o}}$ Sajiki. Shintokumaru has the narrative structure characteristic of aphorism. That is, each part of the story can stand alone, but it is possible to combine all the parts organically.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2014

A glomerular filtration rate (GFR) study is a test that uses radioactive materials or tracers (radiopharmaceuticals) and a computer to see how well the kidneys are working. Asan Medical Center analyzed and compared data between kidney depth, acquired from kidney donors' CT image and acquired from Gates method's GFR value that are calculated by Tonnesen equation. This study was able to confirm that kidney depth measured from CT image was higher than the Gates Method's GFR value, which was calculated by Tonnessen equation; the direct relationship among pathologic results is confirmed. Particularly, kidney donor whose kidney was at the pelvic area had direct relationship with other clinical results. During the GFR test, it is necessary to confirm the location of kidney has no change with reference of CT image. If kidney depth is manually corrected using CT image when we measures GFR of deformed or horse-shoe kidney, it would be possible to acquire the compatible value which is equivalent to clinical result. There would be a possible issue of appropriateness that whether the applied GFR using CT image's kidney depth has clinical validity. In case of a pediatric patient, the GFR derived from Tonnesen was quiet underestimated while manual method and Gordon stay in normal range. Which results may be correct among them? There have been many reports about kidney depth, to be an accurate index of GFR in children. As one of the study performers, we should contemplate what the best option for pediatric patients would be.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.105-127
• /
• 1989

Although poultry industry in Japan has been much developed in recent years, it still needs to be developed , compared with developed countries. Since the poultry market in Korea is expected to be opened in the near future it is necessary to maximize the Productivity to reduce the production costs and to develop the scientific, technologies and management organization systems for the improvement of the quality in poultry production. Followings ale the summary of poultry industry in Japan. 1. Poultry industry in Japan is almost specized and commercialized and its management system is ： integrated, cooperative and developed to industrialized intensive style. Therefore, they have competitive power in the international poultry markets. 2. Average egg weight is 48-50g per day (Max. 54g) and feed requirement is 2. 1-2. 3. 3. The management organization system is specialized and farmers in small scale form complex and farmers in large scale are integrated.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.205-211
• /
• 2015

We evaluated the effectiveness of TL (Time Limit) method by comparing with NTL (Non-time limit) method when it is used for examinations for abdomen Anterior Posterior (AP) in this paper. The evaluation was conducted based on the comparison of dose, and of signal to noise ratio (SNR) and contrast to ratio (CNR) on both methods. The experiments were conducted with XGEO GC 80 (Samsung, Korea), Unfors ThinX RAD (Unfors, Sweden) and Rando Phantom (Alderson research laboratories, USA) and shielding material with the size of $5.5{\times}9{\times}0.1cm^3$. It was set to activate only two upper ionization chambers in automatic exposure control(AEC) mode and the tube-voltage was set to 80kVp. When the exposure time was limited, it is limited to 51 msec. The images both by NTL AEC method and TL AEC method were acquired when with and without attachment of shielding material on the upper ionization chambers. The images were evaluated by SNR and CNR which are the image evaluation methods using 'Image J'. The NTL AEC method showed increases in dose as much as 130.7% at maximum and 80% at minimum than other methods. The TL AEC method showed decreases in mAs and exposure dose than the NTL AEC method as much as 43.8% and 44.4% respectively. There were no significant differences in SNR or CNR for the experiments (($p{\geq}0.05$). Therefore, it is suggested that the TLAEC mode is more effective when examining patients who have high BMI index or a patient with a metallic substance in the body after surgery.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.3-9
• /
• 2011

Purpose: Generally dual energy X-ray absorptiometry has been used for the purpose of evaluation of osteoporosis and treatment. Recently the interest of obesity came to be high and body percent fat test is increasing. Existing measure of body fat have to scan the whole body can be evaluated, but only lumbar spine and hip measurements was assumed to be whole body fat as well as improving the software. It tries to check whether the part measured value not being whole body measurement has the validity or not compared with the value calculated with the method that it is different, it forgives through a correlation with a (BIA) and (BMI). Materials and Methods: In 2010, the body percent fat was measured among the examinee coming to the Asan Medical Center public health care center from March till August against 90 females more than 40 years old through (DXA) and BIA. BMI utilized the value which wrote an hight and weight measured through the body measuring instrument in the examinee information and is automatically calculated. In addition, it classified as the low weight ($13-18.5kg/m^2$), normal ($18.5-25kg/m^2$), and corpulence ($25-30kg/m^2$) based on BMI and so that it could check whether there was the difference according to the weight or not BMI and BIA and correlation between DXA were analyzed in each group. The statistical program for the analysis used SPSS 12.0. Results: The comparison of DXA at 3 which it divides into the low weight and normal and corpulence groups and BIA did not show the difference noted statistically in all groups and the between group comparison was exposed to do not have a meaning. The body percent fat measured by the correlation analysis result DXA at the state that it doesn't divide into the group showed the high correlation (r=0.908, p0.01) noted statistically compared with BMI and showed the high correlation noted statistically in a comparison with BIA (r=0.927, p0.01). Conclusion: It confirmed that the whole body percent fat presumed from the part bone density measurement showed the excel correlation compared with BIA and BMI and information is high. There is still no clear standard about the presumed whole body percent fat and it is difficult to evaluate the fat evaluation by the bone mineral density measurement. However, it is determined that the information offering which is more objective through the comparative study with the body percent fat which is very efficient and in that it can obtain till the information about a fat as well as diagnosis of the osteoporosis through the bone density checkup is measured by the afterward telegraph bone density checkup and is clinically useful is possible.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.99-106
• /
• 2020

Changam, Lee Samman(1770~1845), who created his own handwriiting to be referred to as the three great writers of the late Joseon Dynasty, invented as the original 'Haengunyusu Typeface' and developed Calligraphy spirit of DonggugJinche in Honam province. He ultimately pursued the state of tonglyeong by raising the personality of 'writing is the person's personality' and the attitude of learning the old. Through the book chang-amseogyeol, he basically polished Haeseo of Han Dynasty and Wi Dynasty and emphasized that Haengseo and Choseo are done automatically when muscle strength and bone strength are established. And since calligraphy originated from 'nature', it goes through the 'Beobcheongwijin' spirit. After doing so, expressed the state of tonglyeong of " mubeob-ibeob ", the stage of reaching. In addition, Changam showed the aesthetic that you can get the novelty by pursuing the philosophy of 'Wu' and the 'beauty of Stupid and Lacking' based on LaoTzu and ChuangTzu. This is a philosophy that follows nature's logic to reveal nature's nature. And it is an aesthetic that protects his 'True Wu' without knowing and greedy. On the other hand, Changam promoted natural and vital beauty through force in the method of using the brush. He suggested the 'Push and Hard' of the Han dynasty, pushing it with force using this power properly. In particular, the feeling of an IlunMujeog brush in 『Changam Calligraphy-The cloud stays Poem』 overflows with the vitality and bizarre and strange dynamism of the spirit and typeface as eum-yang harmonizes with each other. In addition, the beauty of Push and Hard containing polyeoghamse is misaligned, but it has achieved a natural aesthetic without invading. This work demonstrates the real look of Changam choseo. In addition, the beauty of Push and Hard containing polyeoghamse is misaligned, but it has achieved a natural aesthetic without invading. Changam proves the real look of "Haedong's best Chose Maestro".

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.643-656
• /
• 2005

The East Sea, a marginal sea or back-arc basin, consists of Japan Basin, Yamato Basin, and Ulleung Basin and is surrounded by the Pacific Plate and Philippine Sea Plate. Ulleung Basin locates in the southwestern part of the East Sea and shows the depth of 1,500 m in average and 2,500 m in maximum, connecting to the Japan Basin along 2,000 m contour. The slope of the seafloor is greater in the western side of the basin than in the southern and the eastern side. The crustal thickness of the Ulleung Basin from the OBS tends to get thicker toward the north and the west side and the sediment thickness of the Ulleung Basin is getting thicker toward the southeast side and reaches up to 12 km. The crustal type of the Ulleung Basin was variously suggested as like as a rifted continental crust, an extended continental crust, and an incipient oceanic trust. The origin of the crustal formation and the Ulleung Basin, however, is still controversial. Based on the bathymetry and gravtiy anomaly data for this study, the axis of the Ulleung Basin shows that the basin develops along the axis trending NW-SE direction and reveals a general symmetry of the bathymetry. And also the free-air gravity anomalies show a very similar pattern to the bathymetry of the basin. The sediment thickness is relatively thicker in the southeastern side of the basin than in the northwestern side. Although the crustal age of the Ulleung Basin is supposed to be younger than them of the Japan Basin and the Yamato Basin, the free-air gravity anomalies of the Ulleung Basin ranging -40 to 50 mGals are lower than the other basins, which suggests that the densities of crust and sediment of the Ulleng Basin are lower than the Japan Basin and the Yamato Basin.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.85-109
• /
• 2018

Recommender system recommends the items expected to be purchased by a customer in the future according to his or her previous purchase behaviors. It has been served as a tool for realizing one-to-one personalization for an e-commerce service company. Traditional recommender systems, especially the recommender systems based on collaborative filtering (CF), which is the most popular recommendation algorithm in both academy and industry, are designed to generate the items list for recommendation by using 'overall rating' - a single criterion. However, it has critical limitations in understanding the customers' preferences in detail. Recently, to mitigate these limitations, some leading e-commerce companies have begun to get feedback from their customers in a form of 'multicritera ratings'. Multicriteria ratings enable the companies to understand their customers' preferences from the multidimensional viewpoints. Moreover, it is easy to handle and analyze the multidimensional ratings because they are quantitative. But, the recommendation using multicritera ratings also has limitation that it may omit detail information on a user's preference because it only considers three-to-five predetermined criteria in most cases. Under this background, this study proposes a novel hybrid recommendation system, which selectively uses the results from 'traditional CF' and 'CF using multicriteria ratings'. Our proposed system is based on the premise that some people have holistic preference scheme, whereas others have composite preference scheme. Thus, our system is designed to use traditional CF using overall rating for the users with holistic preference, and to use CF using multicriteria ratings for the users with composite preference. To validate the usefulness of the proposed system, we applied it to a real-world dataset regarding the recommendation for POI (point-of-interests). Providing personalized POI recommendation is getting more attentions as the popularity of the location-based services such as Yelp and Foursquare increases. The dataset was collected from university students via a Web-based online survey system. Using the survey system, we collected the overall ratings as well as the ratings for each criterion for 48 POIs that are located near K university in Seoul, South Korea. The criteria include 'food or taste', 'price' and 'service or mood'. As a result, we obtain 2,878 valid ratings from 112 users. Among 48 items, 38 items (80%) are used as training dataset, and the remaining 10 items (20%) are used as validation dataset. To examine the effectiveness of the proposed system (i.e. hybrid selective model), we compared its performance to the performances of two comparison models - the traditional CF and the CF with multicriteria ratings. The performances of recommender systems were evaluated by using two metrics - average MAE(mean absolute error) and precision-in-top-N. Precision-in-top-N represents the percentage of truly high overall ratings among those that the model predicted would be the N most relevant items for each user. The experimental system was developed using Microsoft Visual Basic for Applications (VBA). The experimental results showed that our proposed system (avg. MAE = 0.584) outperformed traditional CF (avg. MAE = 0.591) as well as multicriteria CF (avg. AVE = 0.608). We also found that multicriteria CF showed worse performance compared to traditional CF in our data set, which is contradictory to the results in the most previous studies. This result supports the premise of our study that people have two different types of preference schemes - holistic and composite. Besides MAE, the proposed system outperformed all the comparison models in precision-in-top-3, precision-in-top-5, and precision-in-top-7. The results from the paired samples t-test presented that our proposed system outperformed traditional CF with 10% statistical significance level, and multicriteria CF with 1% statistical significance level from the perspective of average MAE. The proposed system sheds light on how to understand and utilize user's preference schemes in recommender systems domain.