• Composites Research
• /
• 제25권4호
• /
• pp.126-132
• /
• 2012

상용프로그램을 사용하여 복합재료 실린더를 설계할 때는 적층 각과 적층 수에 따른 node 수의 증가로 해석하는데 오랜 시간이 걸리기 때문에 본 논문은 LabVIEW를 사용하여 재료의 물성치, 적층각, 적층 수 등을 입력하여 빠른 시간에 응력분포를 구할 수 있는 GUI 프로그램을 개발하여 초기설계시 설계가능영역을 빠른 시간 내에 살펴볼 수 있도록 하였다. 자긴가공된 특수강 실린더의 응력분포와 내압을 받는 특수강/복합재 실린더의 응력분포는 MSC Nastrsn/Patran v.2010 사용하여 값을 비교하였고, 복합재료 실린더의 응력분포는 선행 연구된 값과 비교하여 검증하였다. 또한 프로그램을 사용하여 내압을 받는 자긴가공된 특수강/복합재 실린더의 응력분포를 살펴봄으로써 설계초기단계에서 경향성 검토를 쉽게 할 수 있어 초기설계에 유용하게 사용될 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.296-309
• /
• 2009

Thick-walled cylinder with high pressure have had wide application in the armament industry. In the thick-walled cylinder, fatigue crack is generated at inner radius and developed toward the outer radius. To prevent generation of fatigue crack, the autofrettage process had been used. The compressive residual stress induced by the autofrettage process extends loading pressure and fatigue life of the thick-walled cylinder. In this study, the residual stress of single and compound cylinder by the autofrettage process was evaluated. The analytical compressive residual stress of single cylinder was good agreement with experimental result at inner radius. The analysis on the residual stress of compound cylinder was conducted. The compressive residual stress at inner radius was increased with the overstrain level. And fatigue life of the compound cylinder with initial crack was evaluated. The considered initial crack shape was straight and semi-elliptical. The fatigue life was extended with the overstrain level. The fatigue life of the compound cylinder with semi-elliptical crack was longer than straight crack. The suitable way to extend fatigue life of the compound cylinder was proposed.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.110-116
• /
• 2009

Thick-walled cylinders, such as a cannon or nuclear reactor, are autofrettaged to induce advantageous residual stresses into pressure vessels and to increase operating pressure and the fatigue lifetimes. As the autofrettage level increases, the magnitude of compressive residual stress at the bore also increases. However, the Bauschinger effect reduces the compressive residual stresses as a result of prior tensile plastic strain, and decreases the beneficial autofrettage effect. The purpose of the present paper is to predict the accurate residual stress of SNCM8 high strength steel using the Kendall model which was adopted by ASME Code. The uniaxial Bauschinger effect test was performed to decide BEF, then this constant was used in calculation. There were some differences between theoretical solution and modified solution.

• Composites Research
• /
• 제24권2호
• /
• pp.22-29
• /
• 2011

높은 내압을 받는 장축후육실린더의 성능향상을 위해 최근 그 길이가 길어짐에 따라 무게 또한 무시할 수 없는 변수로 떠오르게 되었다. 따라서 본 논문은 이러한 현상에 대처하기위한 대안으로 장축후육실린더의 무게를 줄이고 대신 복합재 테이프를 감아 무게감소와 더불어 벤딩 (bending)현상을 줄이기 위한 목적으로 복합재가 AISI4340 후육실린더에 미치는 영향을 살펴보았다. 우선 크기가 감소된 AISI4340 후육실린더에 높은 내압을 받는 압력용기 등에 주로 사용되는 자긴가공(autofrettage) 공법을 모사한 후 T300/S208, IM7/PETI5, IM7/8552 테이프를 적용하여 각각의 복합재가 AISI4340 후육실린더에 감을 때 발생되는 응력분포를 살펴봄으로써 탄성계수 및 적층각에 따른 영향을 고찰하였다. 또한 복합재IAISI4340 이중구조 후육실린더의 적층각 도출을 위한 다양한 적층각 조합용 통해 적층각 도출을 위한 전초를 마련하였다. 본 논문을 위한 해석에는 MSC.Nastran/Patran v.2005가 사용되었다.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.488-495
• /
• 2008

In order to achieve long fatigue lifetimes for cyclically pressurized thick cylinders, multi-layered compound cylinder has been proposed. Such compound cylinder involves a shrink-fit procedure incorporating a monobloc tube which has previously undergone autofrettage. The basic autofrettage theory assumes elastic-perfectly plastic behaviour. Because of the Bauschinger effect and strain-hardening, most materials do not display elastic-perfectly plastic properties and consequently various autofrettage mo dels are based on different simplified material strain-hardening models, which is assumed that combination of linear strain-hardenig and power strain-hardening model. This approach gives a more accurate prediction than the elastic-perfectly plastic model and is suitable for different strain-hardening materials. In this paper, a general autofrettage model that incorporates the material strain-hardening relationship and the Bauschinger effect, based upon the actual tensile-compressive stress-strain curve of a material was proposed. The model was obtained using the von Mises yield criterion and plane strain condition. The tensile-compressive stress-strain curve was obtained by experiment. The parameters needed in the model were determined by fitting the actual tensile-compressive curve of the material. Finally, strain- hardening model was compared with elastic-perfectly plastic model.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.269-277
• /
• 2015

Compressed natural gas (CNG) composite vessels for vehicles have been generally made of 34CrMo4 for a inner liner part and E-glass/epoxy for a composite layer part. But, there is a problem of material loss of CNG composite vessels used in vehicles due to the design of excessive thickness of the liner. And, light weight of the CNG composite vessel is required for improving fuel efficiency. In this study, optimal design for CNG composite pressure vessel was performed by using basalt fiber, which is the environment-friendly material having a good mechanical strength. The optimal thickness of each part (inner liner and composite layer) was determined by theoretical analysis and FEA for satisfying structural safety and lightweight of the vessel. Also, for improving fatigue life, optimal autofrettage pressure was derived from FEA results.

• 대한기계학회논문집A
• /
• 제37권8호
• /
• pp.991-998
• /
• 2013

클린디젤 차량용 커먼레일 시스템의 연료분사관은 연료레일로부터 각각의 엔진 실린더에 연결된 인젝터로 연료를 공급하는 역할을 하며 반복 내압을 받게 된다. EURO 배기가스 배출규정 만족 및 연비향상을 위하여 요구되는 연료의 압력은 200MPa 이상으로 증가하고 있으며, 성형결함이 발생하지 않는 헤딩공정과 내압 피로수명 향상을 위한 자긴처리 기술이 요구되고 있다. 본 논문에서는 250MPa 급 반복내압을 만족할 수 있는 파이프 소재의 유동응력와 고주기 피로 데이터를 각각의 실험을 통하여 확보하였고, 연료분사관 앞 끝의 성형결함 여부를 판단하기 위하여 헤딩공정에 대한 유한요소해석을 수행하였다. 반복내압에 대한 내구수명 향상 및 신뢰성 확보를 위해 자긴공정에 대한 유한요소해석을 통하여 외경부의 인장잔류응력까지 고려한 최적 공정설계 수행 및 피로해석을 통한 설계의 타당성을 검증하였다.

• 소성∙가공
• /
• 제17권4호
• /
• pp.292-301
• /
• 2008

Type 2 compressed natural gas(CNG) storage vessels for automobiles are becoming widely used. They are not only supplied to automakers in Korea, such as Hyundai Motors, but increasingly, they are being exported overseas. Autofrettage is a process that produces beneficial residual stresses in a vessel by subjecting it to excessive internal pressure. This strengthens the vessel and improves its fatigue resistance. This paper presents research investigating the autoftettage process and residual stresses it produces in type 2 CNG storage vessels. A finite element analysis technique and a closed form equation are used. Then, fatigue resistance is analyzed through a fatigue evaluation performed according to ASME section VIII.