• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.93-98
• /
• 1998

Magnetic fluids have been used in the commercial area, e. g damping, sealing and hydrodynamic bearing. In this study, magnetic fluid was made for damping in loudspeaker. The magnetic fluids were snthesized by dispersing the magnetite powder which was obtained by precipitation method in Yubase oil. When the magnetic fluid was applied to a 6 cm tweeter, improvements of damping, centering and heat transger in a loudspeaker were noted. Also we compared the performance of the magnetic fluid with 20 % magnetite in the oil and the one of APG-815 (Niphon Ferrofluidic Co.)

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.25-28
• /
• 2004

The dependence of sensitivity, MR ratio, coercivity (Hc) and switching fields as a function of thickness of each magnetic layers(Co, NiFe and Cu) were investigated in pseudo spin valves with a structure of Ta/NiFe/Cu/Co. As measured results dependence of the thickness of each magnetic layer, we obtained MR ratio of 7.26% for Ta(4 nm)/NiFe(7.5 nm)/Cu(3 nm)/Co(5 nm) pseudo spin valves. Also, we could control properties of magnetoresistance for independent magnetization courses of each magnetic layer. Especially, we found that we could control coercivity as constant MR ratio dependence of Co thickness.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.196-201
• /
• 2001

The dependence of CoFe interfacial layer thickness and plasma oxidation condition on tunneling magnetoresistance (TMR) in Ta/NiFe/FeMn/NiFe/Al$_2$O$_3$/NiFe/Ta tunnel junctions was investigated. As the CoFe layer thickness increases, TMR ratio rapidly increases to 13.7 % and decreases with further increase of the CoFe layer thickness. The increase of TMR with the CoFe thickness up to 25 was thought to be due mails to the high spin-polarization of CoFe. The maximum MR of 15.3% was obtained in the Si(100)/Ta(50 )/NiFe(60 )/FeMn(250 )/NiFe(70 )/Al$_2$O$_3$/NiFe(150 )/Ta(50 ) magnetic tunnel junction with a 16 Al oxidized for 40 sec using a Ar/O$_2$ (1:4) mixture gas.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.190-190
• /
• 2010

본 연구에서는 Ti이 도핑된 ZnO의 성장 및 후처리 과정에 따른 구조적, 전기적, 자기적 특성에 관하여 보고한다. ZnTiO 박막은 Pt/SiO2/Si기판에 $500^{\circ}C$, 20 mTorr에서 RF 마그네트론 스퍼터법과 DC 마그네트론 스퍼터법으로 코스퍼터링을 통하여 증착 하였다. 그리고 박막 성장 후 질소분위기에서 $600{\sim}900^{\circ}C$($50^{\circ}$ step)에서 급속 열처리 공정(RTA)을 이용하여 후열처리에 따른 특성변화를 관찰하였다. 구조적 특성변화를 확인하기 위하여 XRD 측정을 하였으며, Ti이 Zn와 치환되어 성장 한 것을 관측하였다. 한편 자기적 특성 확인을 위한 SQUID 측정 결과, ZnTiO 박막에서 강자성 특성인 자기-이력곡선을 확인하였다. 또한 강유전 특성 분석을 위한 I-V 측정에서 ZnTiO 박막에서 강유전 특성인 전류-이력 현상을 관측하였다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.4
• /
• pp.123-128
• /
• 2015

The iron is an element having a high yield strength, mechanical hardness, good electrical conductivity, and also it has been used in various fields because of ease machining. In bridges have been used tendon made of a steel wire for large loads and light weight. Tension measurement of tendon employed in PreStressed Concrete (PSC) bridge is very important for the bridge safety check. NDT (Non-Destructive Testing) is essential for the safety check, however, magnetic NDT is difficult to apply due to the non-linear magnetization curve and hysteresis loop in the magnetic properties. In this work, for basic study of magnetic NDT application, we have constructed a B-H loop measuring system for 7-strand tendon of which diameter is 15.5 mm, and which can apply tensile stress up to 2.0 GPa. We have measured hysteresis loops of two kinds of tendons under different tensile stress. Amplitude permeability and maximum magnetic induction near knee show the most sensitive and high linearity depends on tensile stress. Relative amplitude permeability was decreased from 500 to 200 and maximum magnetic flux density changed 0.6 T.

• The Journal of Korean Association of Computer Education
• /
• v.22 no.5
• /
• pp.51-65
• /
• 2019

This study aims to provide educational implications for more strategic online software education by the types of online learning according to learners' self-regulated learning characteristics in the online software education environment and examining the characteristics of each type. For this, variables related to self-regulated learning characteristic were extracted from the log data of 809 students participating in the online software learning program of K University, and then analyzed using hierarchical cluster analysis. Based on hierarchical cluster analysis learner clusters according to the characteristics of self-regulated learning were derived and the differences between learners' learning characteristics and learning results according to cluster types were examined. As a result, the types of self-regulated learning of online software learners were classified as 'high level self-regulated learning type (group 1)', 'medium level self-regulated learning type (group 2)', and 'low level self-regulated learning type (group 3)'. The achievement level was found to be highest in 'high-level self-regulated learning type (group 1)' and 'low-level self-regulated learning type (group 3)' was the lowest. Based on these results, the implications for effective online software education were suggested.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2002

In order to increase the magnetic properties of a Nd-Fe-B sintered magnet, the general factors including particle size and its distribution, volume fraction of Nd$_2$Fe$_{14}$B phase, degree of alignment of Nd$_2$Fe$_{14}$B grain, oxygen content and grain size etc. should be optimized by controlling the composition of Nd-Fe-B alloy as well as the manufacturing process. In this study, fabrication of the Nd-Fe-B sintered magnet was carried out in a laboratory scale by controlling the composition of Nd-Fe-B alloy and the manufacturing process. The optimum milling condition was found by investigating the milling media, milling time and ball size. The addition of FeGa was effective to increase the coercivity of the Nd-Fe-B sintered magnet. A remanence of 14.4 kG, a coercivity of 9.4 kOe and a maximum energy product of 47 MGOe were obtained from the sintered magnet.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.218-224
• /
• 1996

The magnetic properties and crystallization behaviors of $Fe_{83-x}Al_{x}Nb_{5}B_{12}(X=1~5at%)$ alloys were investigated. The $Fe_{80}Al_{3}Nb_{5}B_{12}$ alloy was developed a very good soft magnetic material with ultra-fine grain structure in Fe-Al-Nb-B system alloys. When 1 at% of Cu was added in Fe-Al-Nb-B alloy, the soft magnetic properties were found to improve significantly through the reduction of the grain size upto about 6~7 nm at $450^{\circ}C$. The magnetic properties of the $Fe_{79}Al_{3}Nb_{5}B_{12}Cu_{1}$ alloy were as follows : ${\mu}_{eff}(1\;kHz)=26,000,\;B_{10}=1.45\;T,\;H_{c}=25\;mOe,\;P_{c}(100\;kHz,\;0.2\;T)=55\;W/kg$, respectively.

• The Journal of Korean Academy of Sensory Integration
• /
• v.13 no.2
• /
• pp.43-51
• /
• 2015

Objective : The purpose of this study was to investigate the correlation between smartphone addiction, sensory processing features and self-efficacy in college students. Methods : From June to August in 2015, a hundred eighty three healthy college students were completed the questionnaire for smartphone addiction (S-scale), sensory processing feature (Adolescent/ Adult Sensory Profile), and self-efficacy (Self-Efficacy Scale) and correlation analyses were applied. Results : There were significant differences on sensory registration and sensory sensitivity in sensory processing features between the addiction group and the non-addiction group. Significant correlations were found between smartphone addiction and sensory seeking, and smartphone addiction and self-efficacy. Conclusion : This study showed smartphone addiction had relationships with high sensory seeking and low self-efficacy. Thus, more studies and interventions focused on preventing smartphone addiction are required for college students.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.217-221
• /
• 2001

We made magnetite which was prepared with mixed liquids of Fe$\^$2+/and Fe$\^$3+/ added to the 3N-NaOH by coprecipitation reaction. Ahead of making magnetite, we investigated variation of physical properties for changing Fe$\^$2+/ : Fe$\^$3+/. Through the variation of the process temperature, we examined physical properties of magnetite. Also, to examine possibility of magnetic fluids, from magnetite manufactured in this way, we examined the crystal structure by X-ray diffraction pattern. The saturated magnetization $\sigma$$\_$s/, value has 60.8 emu/g, when Fe$\^$2+/ to Fe$\^$3+/ ratio is 0.46 : 0.54 in the synthetic magnetite. Keeping the condition, when the synthetic temperature is kept at 80$\^{C}$ for 30 minutes, we get $\sigma$$\_$s/, value 63.51 emu/g. It shows that $\sigma$$\_$s/, value is bigger as the synthetic temperature is higher.