• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.888-894
• /
• 2015

A new method for the simulation of the vehicle's interior road noise is proposed in the present study. The road noise model can synthesize road noise of a vehicle for varying driving speed within a range. In the proposed method, interior road noise is considered as a stochastic time-series, and is modeled by a nonstationary parametric model via two steps. First, each interior road noise signal, obtained from constant speed driving tests performed within a range of speed, is modeled as an autoregressive model whose parameters are estimated by using a standard method. Finally, the parameters obtained for different driving speeds are interpolated based on the varying driving speed to yield a time-varying autoregressive model. To model a full band road noise, audible frequency range is divided into an octave band using a wavelet filter bank, and the road noise in each octave band is modeled.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1471-1477
• /
• 2006

Electrocorticogram (ECoG) was recorded in one young adult suffering from medically refractory partial seizures a few weeks before resection. ECoG of intractable focal epilepsy was analyzed usins AR model, wavelet analysis and cross-correlation analysis. The cross-correlation of the epileptic discharges was calculated between the electrodes in every unit of time, to get the phase shift. A contour map of the phase shift and the sequential two-dimensional phase shift maps were utilized to localize the epileptic foci and to study their propagation process. More than two epileptogenic foci were localized and two kinds of propagating process were shown. These investigations suggest that epileptic phenomena can be caused by at least two kinds of mechanisms in one patient.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.38-45
• /
• 1996

In recent years, ultrasonic has been widely applied in measurement and industrial fields and its application range has been expanded as a result of continuous research and development. Wire Bonding Machine, an instrument fabricating semi-conductor, makes use of ultrasonic bonding method. Specially, the method utilizes the longitudinal vibration of ultrasonic transducer composed of piezoelectric vibrator and horn. This work investigates the design conditions affecting the dynamic characteristics through the theretical and experimental analysis. It conducts separately the system identification of piezoelectric vibrator in time domain and the modal analysis of horn in frequency domain. The integrated modeling is conducted via a combbination of dynamic identification of piezoelectric vibrator and theroretical analysis of horn. Then comparison is made for theroretical and experimental results of the dynamic characteristics of the ultrasonic transducer comprised of piezoelectric vibrator and horn. Form the results of the comparison we develop the design technique of ultrasonic transducer using dynamic characteristics analysis and propose the possibility of ultrasonic bonding considering the optimal conditions for the longitudinal vibration of ultrasonic transducer and other conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.571-576
• /
• 1994

In recent years, ultrasonic has been widely applied in measurement and industrial fields and its application range has been expanded as a result of continuous research and development. Wire Bonding Machine, an instrument fabricating semi-conductor, makes use of ultrasonic bonding method. In order to improve the currently used wire bonding machine using ultrasonic energy, technical accumulation is needed steadily through development of exciting device of ultrasonic composed of piezoelectic vibrator and horn. This study investigates the design conditions affecting the dynamic characteristics through the theoretical and experimental analysis of piezoelectric vibrator and horn, The study conducts separately the system identification of piezoelectric vibrator in time domain and the modal analysis of horn in frequency domain. In theoretical model, the integrated modeling is conducted via a combination of dynamic identification of piezoelectric vibrator and theoretical analysis of horn. Hence comparison is made for theoretical and experimental results of the dynamic characteristics of the ultrasonic transducer composed of piezoelectric vibrator and horn. Form the results of this study we develop the design technique of ultrasonic transducer using dynamic characteristic analysis and propose the possibility of ultrasonic welding considering the optimal condition of the natural frequency and vibration mode of horn.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.12-25
• /
• 2009

The aim of this study is to analyze the periodical and spatial characteristics of urban crime and to find out the factors that affect the crime occurrence. For these, crime data of Masan City was examined and crime occurrence pattern is ploted on a map using crime density and criminal hotspot analysis. The spatial relationship of crime occurrence and factors affecting crime were also investigated using ESDA (Exploratory Spatial Data Analysis) and SAR (Spatial Auto-Regression) model. As a result, it was found that crimes had strong tendency of happening during a certain period of time and with spatial contiguity. Spatial contiguity of crimes was made clear through the spatial autocorrelation analysis on 5 major crimes. Especially, robbery revealed the highest spatial autocorrelation. However as a autocorrelation model, Spatial Error Model(SEM) had statistically the highest goodness of fit. Moreover, the model proved that old age population ratio, property tax, wholesale-retail shop number, and retail & wholesale number were statistically significant that affect crime occurrence of 5 most major crimes and theft crime. However population density affected negatively on assault crime. Lastly, the findings of this study are expected to provide meaningful ideas to make our cities safer with U-City strategies and services.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.646-652
• /
• 2017

The objective of this study was to verify the longitudinal reciprocal causal relationship between depression and the somatic symptoms of depression among adolescents through an autoregressive cross-lagged model using data from the Korean Children & Youth Panel Survey. The subjects of this study included 1,968 adolescents, who participated in the second, fourth, and sixth Korean Children & Youth Panel Surveys. The results showed that both depression and the somatic symptoms of depression at a previous point in time affect depression and the somatic symptoms of depression at a later point in time. It was also found that depression at a previous point in time has a cross-lagged effect on the somatic symptoms of depression at a later point in time, implying that more severe depression at a previous point in time leads to increased severity of somatic symptoms at a later point in time. It was found that the somatic symptoms of depression at a previous point in time have a cross-lagged effect on depression at a later point in time, indicating that more severe somatic symptoms of depression at a previous point in time lead to increased severity of depression at a later point in time. This study is significant in that it provides baseline information about nursing interventions for adolescent mental health.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.671-683
• /
• 2018

The flood damage caused by heavy rains in urban watershed is increasing, and, as evidenced by many previous studies, urban flooding usually exceeds the water capacity of drainage networks. The flood on the area which considerably urbanized and densely populated cause serious social and economic damage. To solve this problem, deterministic and probabilistic studies have been conducted for the prediction flooding in urban areas. However, it is insufficient to obtain lead times and to derive the prediction results for the flood volume in a short period of time. In this study, IDNN, TDNN and NARX were compared for real-time flood prediction based on urban runoff analysis to present the optimal real-time urban flood prediction technique. As a result of the flood prediction with rainfall event of 2010 and 2011 in Gangnam area, the Nash efficiency coefficient of the input delay artificial neural network, the time delay neural network and nonlinear autoregressive network with exogenous inputs are 0.86, 0.92, 0.99 and 0.53, 0.41, 0.98 respectively. Comparing with the result of the error analysis on the predicted result, it is revealed that the use of nonlinear autoregressive network with exogenous inputs must be appropriate for the establishment of urban flood response system in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.468-479
• /
• 2022

To detect targets with active sonar system in the underwater environments, the targets are localized by receiving the echoes of the transmitted sounds reflected from the targets. In this case, reverberation from the scatterers is also generated, which prevents detection of the target echo. To detect the target effectively, reverberation suppression techniques such as pre-whitening based on autoregressive model and principal component inversion have been studied, and recently a Non-negative Matrix Factorization (NMF)-based technique has been also devised. The NMF-based reverberation suppression technique shows improved performance compared to the conventional methods, but the geometry of the transducer and receiver and attenuation by distance have not been considered. In this paper, the performance is improved through preprocessing such as the directionality of the receiver, Doppler related thereto, and attenuation for distance, in the case of using a continuous wave with a bistatic sonar. In order to evaluate the performance of the proposed system, simulation with a reverberation model was performed. The results show that the detection probability performance improved by 10 % to 40 % at a low false alarm probability of 1 % relative to the conventional non-negative matrix factorization.

• International Area Studies Review
• /
• v.20 no.2
• /
• pp.63-83
• /
• 2016

This paper examines the determinants of efficiency in a KOSDAQ-listed manufacturing firm. We use Data Envelopment Analysis (DEA) to estimate the efficiency of the export manufacturing firm. We employ two inputs (number of employees, equity) and one output (sales) in the DEA. The determinants of export manufacturing firm efficiency are estimated using the panel Tobit model. An analysis of 369 export manufacturing firms from 2013 to 2015 indicates the following results: First, the R&D intensity, the wage and salary intensity, total asset, and equity ratio each had a negative impact on both the CCR and BCC efficiency scores. However, export intensity had a negative impact on CCR efficiency scores in a KOSDAQ-listed total export manufacturing firm. Second, the R&D intensity had a positive impact on both the CCR and BCC efficiency scores, but export intensity, the wage and salary intensity, and equity ratio each had a negative impact on the CCR and BCC efficiency scores in a KOSDAQ-listed large export manufacturing firm. Third, the R&D intensity, the wage and salary intensity, total asset, and equity ratio each had a negative impact on both the CCR and BCC efficiency scores; respectively, in a KOSDAQ-listed small and medium export manufacturing firm.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.105-115
• /
• 2023

This study seeks to find a way to induce users to expand their direct participation in sports through the acceptance of digital technology. From July 1 to August 30, 2022, a survey was conducted targeting home training users who applied the Internet of Things (IoT). 129 people participated in the survey through non-face-to-face self-administration method. For data processing, frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis, and 3-step mediation regression analysis were conducted using IBM's SPSS 21.0 program. The results of the study are as follows. First, in the relationship between the home training PPM model and direct participation in sports, ease appeared to have a mediating effect. In the factors of push, simple functionality showed a complete mediating effect, and inefficiency showed a partial mediating effect. Among pull factors, enjoyment and possibility of experience showed a complete mediating effect. In the mooring factors, individual innovativeness showed a complete mediating effect. Second, in the relationship between home training PPM model and direct participation in sports, usefulness showed a mediating effect. In the factors of push, simple functionality showed a complete mediating effect, and inefficiency showed a partial mediating effect. Among pull factors, enjoyment and possibility of experience showed a complete mediating effect. Among the mooring factors, individual innovativeness showed a partial mediating effect. Through this research, it is expected that the sports industry will contribute to the expansion of consumption expenditure and economic growth through the expansion of digital technologies such as NFT, Metaverse, and virtual/augmented reality.