• Journal of the Korean Magnetics Society
• /
• v.17 no.3
• /
• pp.137-140
• /
• 2007

The ordering of nanopores in AAO has been improved by using laser interference lithography. After growing Fe and Cu on this substrate in vacuum and removing AAO, Fe nanodots are fabricated. The nanopores in AAO and nanodots are ordered in one dimension following the prepatterning. It has been confirmed from the magnetic hysteresis loop that the Fe nanodots have vortex structure and the dipolar interaction is dominant among them.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.653-656
• /
• 2004

We report the magnetic properties, microstructures, and crystal orientations of the CrO$_2$ thin films on TiO$_2$ single crystals. CrO$_2$ thin films were deposited by thermal decompositions with CrO$_3$ source materials. The microstructure of (110) oriented CrO$_2$ thin films deposited on (110) TiO$_2$ single crystals were uniform. As the oxygen flow rates increased, the resistivity, coercive field, and remnant magnetization of the CrO$_2$ thin films on TiO$_2$ single crystals decreased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.205-210
• /
• 2008

Magnetic hysteresis loops of a nickel strip and a Fe-Co alloy strip, which have been used in magnetostrictive strip type guided wave transducers for long range ultrasonic testing of pipelines, were measured and then magnetic property effects of a strip on transducer sensitivity were analyzed. The sensitivity of an optimized Fe-Co strip transducer was superior to that of the nickel strip transducer by a factor of about 30. It was shown that this was mainly attributed to the differences in remanence magnetization and coercivity of the two magnetostrictive materials.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.46-50
• /
• 2002

Soft magnetic Mumetal thin film was fabricated under magnetic field at various substrate temperatures. High vacuum annealing was carried out at 200$\^{C}$ during 1 hr. The in-plane anisotropy of Mumetal thin film was determined from hysteresis loops measured by VSM when the sample axis varied from the field direction from 0°to 180°. As the substrate temperature increases, the coercivity in easy direction decreases, but uniaxial anisotropy deviates from the field direction. After vacuum annealing at 200$\^{C}$ for 1 hr, the uniaxial anisotropy is improved irrespective of substrate temperature. When the substrate temperature was 50$\^{C}$, the anisotropy field is 4.3 Oe. As the substrate temperature increases anisotropy field decreases. Uniaxial anisotropy of Mumetal thin film was formed best at 50$\^{C}$ before and after annealing.

• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.411-416
• /
• 1996

We have studied the effect of a spin-dependence interface electron scattering on the giant magnetoresistance by adding a Fe magnetic material to the Co/Cu interfaces. The $Fe(50\;{\AA})/[Co(17\;{\AA})/Fe(t\;{\AA})/Cu(24\;{\AA})]_{20}$ multilayers are deposited on the Corning glass 2948 and 7059 substrates in a dc magnetron sputtering system. The magnetoresistance ratio is 22 % in the only Co/Cu multilayer, while it is increased to 26 % with inserted ultra thin Fe interface layer and reduced with increasing thickness of the Fe interface layer. It was investigated to the dependence of the magnetoresistance behaviors on annealing temperature. The magnetic properties of the multilayers were measured by vibrating sample magnetometer. Also, the structures and the surface roughness of samples were characterized by X-ray diffraction and atomic force microscope, respectively. The magnetoresistance ratio was increased to annealing temperature $300^{\circ}C$, but reduced at the temperature higher than $300^{\circ}C$ due to the interfacial diffuse.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.224-232
• /
• 1983

The effects of ball-milling time on solid state reactions in the system $BaCO_3-Fe_2O_3$ and the magnetic properties of Ba-ferrite 4(BaFe_{12}O_{19})$ have been studied. $BaCO_3-Fe_2O_3 $mixtures were prepared by ball-milling for varying lengths of time; 5, 15, 30, 80 and 200 hours. Techniques employed were thermogravimetry, X-ray diffraction analysis, scanning electron microscopy and B-H curve tracer. It is shown that the aggregation states and superparamagnetic size fractions obtained by increasing ball-milling time have remarkable effects on solid state reactions and magnetic properties of Ba-ferrite.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.105-110
• /
• 1992

In order to measure fine rotation angles by magneto-optic effects of magneto-optical recording thin films, a polarization modulation method is used. In the experiment, the polarization of laser (He-Ne laser) beam is modulated by a Faraday rotator and the amplified modulated signals are selectively detected by phase sensitive detector. The magnetic Kerr rotation and Faraday rotation hysteresis loops are investigated by this method for thermally evaporated amorphous TbFeCo thin films and RF sputtered garnet thin films. Rotation angles about $0.25^{\circ}$ are measured easily from TaFeCo thin films. In the case of longitudinal Kerr rotation, very small rotation angle of $2.5\times10^{-3^\circ}$ is measured with good accuracy of the measurement (about $1\times10^{-3^\circ}$). And it is found that each thin films have the hysteresis curves of high coercivity and good squareness.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.315-321
• /
• 2003

The integrity of the turbine rotors can be assessed by measuring the material properties at service temperature. In order to evaluate the remanent life of turbine rotor steel nondestructively, a measurement system of reversible magnetic permeability using an alternating perturbing magnetic field was constructed. We present a new non-destructive method to evaluate the remanent life of 1Cr-1Mo-0.25V steel using the value of reversible magnetic permeability. This method is based on the existence of reversible magnetic permeability in the differential magnetization around the coercive field strength. We measured the first harmonics voltage induced in a coil using a lock-in amplifier tuned to an exciting frequency. The Results of reversible magnetic Permeability and Wickers hardness on the aged samples show that the peak interval of reversible magnetic permeability (PIRMP) and Vickers hardness decreases as aging time increases. A softening curve is obtained from the correlation between Vickers hardness and the PIRMP. This curve can be used as a non-destructive method to evaluate the remanent life of turbine rotor steel.

• Journal of the Korean Magnetics Society
• /
• v.6 no.3
• /
• pp.158-164
• /
• 1996

The magnetic and magneto-optical properties of the Tb/Co multilayers as a function of the layer thickness and the ratio of Tb/Co thicknesses were studied. When the thickness of Tb layer was $12{\AA}$, the maximum perpendicular anisotropy energy and the maximum thickness ratio which displays the perpendicular anisotropy were obtained. This result indicated that the Tb-Tb and Co-Co pairs as well as the Tb-Co pairs contribute to the perpendicular anisotropy. The Kerr rotation angle, $({\theta}_k)$ was proportional to the perpendicular anisotropy energy and was inversely proportional to the average spin dispersion angle, $(\alpha)$. The maximum $({\theta}_k)$ of $0.28^{\circ}$ was obtained in the film of $12{\AA}$ Tb and the thickness ratio of 1.55. The abnormal hysteresis loops were appeared during the aging treatment because the coercivity difference between the Co layer and the Tb layer was increased by the preferential oxidation of Tb.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.54-61
• /
• 2013

Ferromagnetic material's residual magnetization is remained because of the interaction between domains from external apply field, so the electrical and electronic industry and area of defense development request deperm protocol which makes the residual magnetization to 0. But the deperm protocols which are used theses days are developed by using only experience and experiment, so we have to develop deperm protocol considering hysteresis curve. In this paper, Anhysteretic Deperm, Deperm-ME, Flash-Deperm were analyzed using two dimensional finite element method and Preisach model that was formulated by property of magnetic materials. From that analysis, the relations between hysteresis curve and deperm variable are compared by analyzing the trace of Preisach plane. Also, an efficient current ratio of deperm protocol, is proposed.