• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.24-29
• /
• 2012

The sounds of exhaust emissions of automobiles are independent sound sources which are nothing to do with voices. We have no information for the sources of voices and exhaust sounds. Accordingly, Independent Component Analysis which is one of the Blind Source Separaton methods was used to segregate two source signals from each mixed signals. Maximum Likelyhood Estimation was applied to the signals came through the stereo microphone to segregate the two source signals toward the maximization of independence. Since there is no clue to find whether it is speech signal or not, the coefficients of the slope was calculated by the autocovariances of the signals in frequcency domain. Noise remover for speech signals was implemented by coupling the two algorithms.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.371-371
• /
• 2012

연속된 강우 관측 자료로부터 강우사상을 분리하는 것은 수문 분석에서 매우 기초적인 부분이다. 하지만 이를 분리하는 표준적인 방법은 아직 정해진 것이 없다. 보편적으로 강우사상의 분리에 강우사상간 (무강우)시간정의(IETD; Inter-event Time Definition)을 사용하고 있으며, 이는 강우사상간 최소 (무강우)시간(MIT; Minimum Inter-event Time, 이하 '강우사상간 최소 무강우 시간' 이라고 함.)이라고도 한다. 강우사상간 최소 무강우 시간을 결정하기 위해 사용되는 방법으로는 자기 상관계수를 이용하는 방법과 순위상관계수를 이용하는 방법, 강우사상간 무강우시간에 대한 변동계수를 이용하는 방법, 연간 호우 발생수를 이용하는 방법 등이 있다. 본 연구에서는 한강수계 강우의 강우사상간 최소 무강우 시간을 고찰하기 위해 한강수계 국토해양부에서 운영 중인 한강수계 강우관측소의 자료를 대상으로 앞서 제시한 4가지 방법을 적용하여 각 방법 간의 차이를 비교하여 보았으며, 더불어 개별 강우관측소의 자료와 티센망을 이용한 유역평균강우량을 사용했을 때 강우사상간 최소 무강우 시간의 차이를 비교하여 보았다.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.21-27
• /
• 2006

This paper is for the segmentation and volume calculation of the white matter and gray matter from brain MRI. We segment white matter, gray matter and CSF from the Brain image in the normal and abnormal person, and calculate the volume of segmented tissue. In this paper, we present a new method of extracting white matter, gray matter and CSF and calculation its volume from MR images for brain. And we have developed the determining method of threshold that can extract white matter and gray matter from MR image for brain through the analysis of gray values represented by ratio of each component. We proposed the calculation method of volume for white matter and gray matter by using number of extracted pixels in each slice. This algorithm input CSF/Head volume ratio and age of patient and calculates discriminant value through discriminant expression, classifies normal and abnormal using calculated discriminant value. As a result, we could blow that white matter and gray matter volume decrease and CSF volume increase as we grow gold.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.86-91
• /
• 2016

The cogging torque of a brushless dc (BLDC) motor results from the interaction between permanent magnets and iron core, and it causes noise and induce vibrations. During a manufacturing process, assembly tolerances lead to the change of the electromagnetic structure of a BLDC motor where permanent magnets are not properly glued to the surface of rotor core. In this paper, the effect of magnet separation from the surface of rotor core on the cogging torque is investigated due to assembly tolerance. The relationship with key design parameters is considered such as separation between magnets and rotor core, the number of magnets having separation, as well as the several types of arrangements among neighboring magnets. Finite element method (FEM) has been used to analyze a BLDC motor, and the allowable assembly tolerance is proposed to prevent generating noise and vibrations. Within proposed assembly tolerance, it is concluded that the cogging torque of a BLDC motor is decreased, and hence noise and vibrations.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.579-587
• /
• 2005

Phase separations of Poly(4-vinylphenol)(PVPh)/acetone and PVPh/methyl ethyl ketone solutions were measured using the thermal optical analysis (TOA) method. The phase separations of these system showed the behaviors of LCST-type (lower critical solution temperature). The measured cloud temperatures were lowered with increasing molecular weight of PVPh, and cloud temperatures of PVPh/MEK solutions shifted to higher temperature regions, compared to the PVPh/acetone solutions. Phase equilibria of PVPh/ketone solutions were described with taking account of self-associations of PVPh and cross-associations between PVPh and solvent, by using the PC-SAFT equation of state. PC-SAFT EoS parameters of PVPh and cross-association parameters were determined by simultaneously fitting liquid density data of PVPh and VLE data of the PVPh/acetone system. The estimated parameters of PVPh and cross-association parameters were utilized to calculations of the binodal and spinodal curves, and the calculated binodal curves were in good agreements with the experimental cloud temperatures.

• Journal of the Korean Magnetics Society
• /
• v.22 no.4
• /
• pp.121-124
• /
• 2012

We have studied electronic and magnetic structure of cubane-type Mn4 cluster using OpenMX method based on density functional method. The calculated density of states shows that the octahedron of O atoms split $e_g$ and $t_{2g}$ energy levels like bulk MnO with cubic structure. Total energy with antiferromagnetic spin configuration is lower than those of other spin configurations because of super exchange interaction. Calculated exchange interaction J between Mn atoms with anti-parallel spin is larger than between Mn atoms with parallel spin.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2011

Purpose : A new inhomogeneity correction method based on two-point Dixon sequence is proposed to obtain water and fat images at 0.35T, low field magnetic resonance imaging (MRI) system. Materials and Methods : Joint phase-magnitude density function (JPMF) is obtained from the in-phase and out-of-phase images by the two-point Dixon method. The range of the water signal is adjusted from the JPMF, and 3D inhomogeneity map is obtained from the phase of corresponding water volume. The 3D inhomogeneity map is used to correct the inhomogeneity field iteratively. Results : The proposed water-fat imaging method was successfully applied to various organs. The proposed 3D inhomogeneity correction algorithm provides good performances in overall multi-slice images. Conclusion : The proposed water-fat separation method using JPMF is robust to field inhomogeneity. Three dimensional inhomogeneity map and the iterative inhomogeneity correction algorithm improve water and fat imaging substantially.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.341-344
• /
• 2008

Lightweight concrete is known for its advantage of reducing the self-weight of the structures, reducing the areas of sectional members as well as making the construction convenient. Thus the construction cost can be saved when applied to structures such as long-span bridge and high rise building. However, the lightweight concrete requires specific mix design method that is quite different from the typical concrete, since using the typical mix method would give rise the material segregation as well as lower the strength by the reduced weight of the aggregate. In order to avoid such problems, it is recommended to apply the mix design method of self-consolidating concrete for the lightweight concrete. Therefore experimental tests were performed as such mechanical properties(compressive strength, dry density and structural efficiency) of concrete and dry shrinkage according to ACI committee 209.

• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.251-267
• /
• 1999

This study examines that pricing multiple on and incremental explanatory power of equity book value(earnings) increase(decrease) as financial health decrease. Test using a sample of 75 bankrupt firms and test using a cross-sectional, pooled sample both yield inference consistent with predictions. It is thus hypothesized that the more bankrupt time are, the higher(lower) pricing multiple book value of equity(earnings) obtained. Findings are robust to inclusion of controls for debt/assets ratio, ROA, and ROIC. Overall, the results is the hypothesis.

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.305-309
• /
• 1993

Thermal stability of Co/Cu artificial superlattice (AS) prepared by RF-magnetron sputtering and the effect of low temperature annealing on the magnetoresistance of the AS have been investigated in this work. Dependence of annealing behavior on the Cu spacer thickness, Fe underlayer thickness, and kind of the underlayer was examined and the relationship between the interfacial reaction and magnetoresistance was studied. It turned out that when Co/Cu AS was annealed at low temperature ($<450^{\circ}C$), the magnetoresistance could increase in the case of AS with thick spacer Cu ($20~25\AA$) layer, whereas it decreased in the case of AS with thin spacer Cu ($7\AA$) layer, which of the former is in contrast with previous reports and the latter in consistent with them. The increase of magnetoresistance is due to increase of interfacial atomic sharpness, which is supported by low angle X-ray diffraction analysis. The thermal stability of Co/Cu AS was better in the case of thick Fe underlayered AS. Interfacial reaction (separation of intermixed Co and Cu) could be observed at lower temperature for (200)-textured samples than for (111)-textured samples, which can be interpreted in terms of interdiffusion kinetics depending on the crystallographic orientation.