• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.128-130
• /
• 2008

This paper presents an algorithm to design a self-tuning proportional-integral(PI) speed controller for servo systems. The control gains are calculated with estimated system parameters, i.e. inertia and viscous damping which are estimated by initial operation. The simulation and experimental results show the feasibility and performance of the proposed algorithm.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.80-84
• /
• 1996

A Switched Reluctance Motor(SRM) has a torque pulsating inherently due to characteristics of pulse driving. A torque pulsating causes noise and sound vibration. To reduce a noise, a torque pulsating shall be controlled. Many efforts to make flat-topped current has been proposed to minimize a torque pulsating up to now. This paper proposed a control scheme to minimize the vibration of SRM by controlling the vibration directly by using of self-turning technique. The experimental results show that the proposed control scheme is effective in reducing the torque ripple and noise.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 춘계학술발표논문집
• /
• pp.147-149
• /
• 2007

"Dynamic Neural Unit"(DNU) based upon the topology of a reverberating circuit in a neuronal pool of the central nervous system. In this thesis, we present a genetic DNU-control scheme for unknown nonlinear systems. Our methodis different from those using supervised learning algorithms, such as the backpropagation (BP) algorithm, that needs training information in each step. The contributions of this thesis are the new approach to constructing neural network architecture and its trainin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1264-1267
• /
• 1987

In this study, a new implementation of an adaptive noise filter is proposed to eliminate timevarying 60Hz noise and its harmonics in ECG signal. The new technique was applied to the ECG and it was found in the experiment that it showed much better characteristics than conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.360-364
• /
• 1989

In this paper, the robustness of self tuning controller for continuous time system is investigated. The continuous time least square algorithm is used in estimating parameters. The main control algorithm is the pole-zero placement control. The effects of unmodeled dynamics on continuous time approach and discrete-time approach are compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2501-2503
• /
• 2004

In this paper, we propose an auto-tuning control algorithm for a mobile robot. This controller consists of a three layer neural networks and a PID controller. In order to compensate for uncertainties from unknown dynamics and ignored dynamic effects such as slip conditions, neural network based position schemes are proposed. The results of simulations show the validity of proposed method. This controller learns quickly the model and has good position control performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.476-481
• /
• 1988

In this paper a pH process of a weak acid with a strong base is modeled into a bilinear form, and a self-tuning pH control algorithm which is robust against initial values of solution and disturbances is presented. The control algorithm employs the recursive least square method for the parameter estimation and the generalised minimum variance criterion as the objective function. The computer simulation shows that the tracking of desired pH values is obtained in satisfactory manner regardless of the initial values chosen for the process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.246-249
• /
• 1988

In this paper, a new design technique which uses weighted least-sqare approach for the solution of the pole assignment problem is represented. This technique maybe used to assign some closed loop poles to places which reduce the large system input and output variance due to near pole-zero condition. The least-square approach is also applied to the design of servo self-tuning controller with integrator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.194-199
• /
• 1989

In this paper, using the direct drive arm for plant, the controller is developed to track the desired trajectory in high speed and precision. For the purpose of this, through extending self-tuning pole-placement algorithm, we developed self-tuning pole-shift algorithm which is fast in response and good tracking for the reference tracking change. Developed controller is applied a three-link direct drive arm with the varing payload to track the desired tracking. And, through the computer simulation, the performance of developed controller is compared with the performance of the computed torque method and the self-tuning pole placement algorith.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.50-53
• /
• 1988

This paper presents an approach to the position control of a robot manipulator by using a self-tuning pole-placement controller with an inverse model. The linearized independent difference equations of manipulator motion are obtained, and the parameters of these models are estimated on line. The controller is composed of two parts, the primary controller obtains desired torques by using an inverse model and the secondary controller computes variational torques on the basis of induced perturbation equations by minimizing a quadratic criterion with a closed-loop pole-placement. Simulation is performed to demonstrate the effectiveness of this approach.