• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.264-274
• /
• 2003

This paper presents a direct generalized minimum-variance self tuning controller with a PID structure using neural network which adapts to the changing parameters of the nonlinear system with nonminimum phase behavior, noises and time delays. The self-tuning controller with a PID structure is a combination of the simple structure of a PID controller and the characteristics of a self-tuning controller that can adapt to changes in the environment. The self-tuning control effect is achieved through the RLS (recursive least square) algorithm at the parameter estimation stage as well as through the Robbins-Monro algorithm at the stage of optimizing the design parameter of the controller. The neural network control effect which compensates for nonlinear factor is obtained from the learning algorithm which the learning error between the filtered reference and the auxiliary output of plant becomes zero. Computer simulation has shown that the proposed method works effectively on the nonlinear nonminimum phase system with time delays and changed system parameter.

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.441-449
• /
• 1998

A self-tuning control scheme, incorporated with the simplified 1st-order ARMAX(Auto-Regressive Moving Average eXogenous) model, for single rod hydraulic cylinder which has varying dynamic characteristics is presented here. An adaptive controller is developed for the system that uses feedforward and optimal feedback control for simultaneous parameter identification and tracking control. Through experimental results, the performance comparison of the self-tuning controller with a fixed gain proportional controller clearly shows its superior ability in handling load changes in quiescent states.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.1-8
• /
• 2002

This paper presents a generalized minimum-variance self-tuning controller with a PID structure using neural network which adapts to the changing parameters of the nonlinear system with nonminimum phase behavior and time delays. The neural network is used to estimate the controller parameters, and the control output is obtained through estimated controller parameter. In order to demonstrate the effectiveness of the proposed algorithm, the computer simulation is done to adapt the nonlinear nonminimum phase system with time delays and changed system parameter after a constant time. The proposed method compared with direct adaptive controller using neural network.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.399-401
• /
• 1989

Utilizing an interconnected set of neuron-like elements, the present study is to provide a method of parameter estimation for a second order linear time invariant system of self-tuning controller. The result from the proposed method is evaluated by comparing with those obtained by the recursive least square (RLS) identification algorithm and extended recursive least square (ERLS) algorithm, and it shows that, although the smoothness of system performance is still to be improved, the effectiveness of shorter computing time is demonstrated which may be of considerable value to real time computing.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.247-255
• /
• 1989

This paper proposes an error model with integral action and a pole-place-ment self-tuning controller for robot manipulators in task coordinates. The controller can reject the offset due to any load disturbance without a detailed description of the robot dynamics. The error model parameters are estimated by the recursive least square identification algorithms, and controller parameters are determined by the pole-placement method. A computer simulation study has been conducted to demonstrate the performance of the proposed control system in task coordinates for a 3-joint and 2-link spatial robot manipulator with payload.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.57-64
• /
• 2001

This study presents an self tuning regulator(STR) to improve the air-fuel ratio control of performance of gasoline engine. The STR is designed based on the nonlinear dynamic engine model, and the performance of the STR is evaluated through the simulation and experiments. The STR shows better performance than a conventional PI controller in terms of the response time and disturbance rejection. Since the STR has less calculation load than the complex nonlinear controller, this algorithm can be easily applied to on-board engine controller.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.17-23
• /
• 1985

This paper describes a method for the design of a self-tuning controller of single-input/single-output systems with system noises and obsrrvation noises. The method uses state-space techniques to assign the closed-loop system poles to desired locations, but the control law is made up of process input and output measurement values, so that state estimation is unnecessary. Also the difficulties of tracking of reference inputs in state.space pole-placing control are tackled by including the reference input in the cost function proposed by Beger.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1056-1059
• /
• 1996

In this paper, we analyzed the effect of the change of the rotor time constant on the performance of the indirect vector control system. By employing indirect field orientation technique, we have also suggested an optimal control algorithm that allows an induction motor to maintain the maximum torque under the changing environment of rotor time constant. A computer simulation on the transient response of the output torque was demonstrated. To verify the validity of the method that has been proposed in this paper, an experiment has been performed utilizing TMS32OC31(40MHz) DSP chip which is capable of performing floating-point arithmetic in real time.