• Journal of Korea Technology Innovation Society
• /
• v.13 no.1
• /
• pp.68-98
• /
• 2010

This study was conducted to analyze the results of the implementation of next-generation growth engine program that was promoted across all government agencies for five years from 2004 as part of a range of initiatives aimed at expanding the nation's economic growth potential. The results were analyzed in this study using five indices: program purpose and design; strategic planning; program management; program results; and pan-governmental agency cooperation and coordination. The results of the study include the following. First, regarding program purpose and design, it was found that consistent leadership in the promotion of the programs was insufficient as the relevant program promotion systems and financial resources were dispersed among governmental agencies, even though the objectives and validity of the programs were recognized. Second, with regard to strategic planning, it was found that although the program objectives and technical development strategy had been established at the beginning of the program, they were biased toward the technical objectives and mainly implemented by the technology suppliers. Third, regarding program management, it was found that the responsibility for general administration, ranging from task planning to policy improvement, was given to the appointed program director but that the system of cooperation among the agencies was insufficient to carry out the relevant tasks. Fourth, regarding the results of the program, it was difficult to understand the results consistently as the economic objectives were not clearly presented, even though the technical objectives were achieved despite the short implementation period of the program. Fifth, with regard to pan-governmental agency cooperation and coordination, it was found that the coordination organization whose remit was to implement the program was established pursuant to the Basic Law on Science and Technology, but that no detailed regulations or guidelines on the operation of the organization were drawn up. To efficiently plan and execute future pan-governmental agency R&D programs that are similar to the next-generation new growth engine program, various requirements should be met, namely, 1) joint planning and consistent program design among governmental agencies, 2) clarification of the program objectives and budget allocation system, 3) establishment of a pan-governmental agency program operation and assessment system, 4) formulation of a strategy for linking R&D with standardization, and 5) enactment of pan-governmental agency joint operation rules.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.4
• /
• pp.289-304
• /
• 1999

The purpose of this study was to examine the consumers' acceptance of irradiated foods according to sociodemographic characteristics and the factors to distinguish subjects with differential levels of their willingness to buy them. Data were collected from the 365 women living in Youngnam area by the self-administered questionnaire. The results from this study were as follows. First, consumers were concerned regarding food safety issues in general and particularly preservatives. Second, many subjects had not heard of the irradiated foods and showed wait-and-see attitude in the willingness to accept them. Consumers' willingness to purchase them were higher than any other cases if radiation would not remain in foods. Third, the results from the discriminant analyses showed that the concern toward food safety, perceived innovativeness, willingness to pay more for organic foods, and knowledge of irradiation were the factors to distinguish groups with differential levels of willingness to purchase the irradiated foods. The results from the study imply that accurate and scientific information about food irradiation should be given to the consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.578-589
• /
• 2018

Building Integrated Photovoltaic (BIPV) system is a typical integrated system that simultaneously performs both building function and solar power generation function. To maximize its potential advantage, however, the solar photovoltaic power generation function must be integrated from the early conceptual design stage, and maximum power generation must be designed. To cope with such requirements, preliminary research on BIPV design process based on architectural design model and computer simulation results for improving solar power generation performance have been published. However, the requirements of the BIPV system have not been clearly identified and systematically reflected in the subsequent design. Moreover, no model has verified the power generation design. To solve these problems, we systematically model the requirements of BIPV system and study power generation design based on the system requirements model. Through the study, we consistently use the standard system modeling language, SysML. Specifically, stakeholder requirements were first identified from stakeholders and related BIPV standards. Then, based on the domain model, the design requirements of the BIPV system were derived at the system level, and the functional and physical architectures of the target system were created based on the system requirements. Finally, the power generation performance of the BIPV system was evaluated through a simulated SysML model (Parametric diagram). If the SysML system model developed herein can be reinforced by reflecting the conditions resulting from building design, it will open an opportunity to study and optimize the power generation in the BIPV system in an integrated fashion.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.215-222
• /
• 2012

Purpose: This study was performed to investigate the influence of indoor air qualities of an office environment on dry eye syndrome for wearing contact lens and non-wearing contact lens. Methods: To study the effects of indoor air qualities on dry eye syndrome for seventy-one subjects, $CO_2$, temperature, humidity, TSP, PM10, HCHO were measured. Each subject was tested by a McMonnie's dry eye syndrome questionnaire, a Schirmer Tear Test-I (S.T.T-I), a Schirmer Tear Test-II with anesthetics (S.T.T-II), and Tear film break-up time (T.B.U.T) in the their offices. Results: There was significant relation between the indoor air quality and dry eye syndrome for wearing contact lens and non-wearing when TSP was over $200{\mu}g/m^3$, PM10 was higher than $86.7{\mu}g/m^3$ and Formaldehyde was over $0.4{\sim}1.0{\mu}g/m^3$. However, there was no significant effect on dry eye syndrome with $CO_2$ (p=.0146), temperature (p=0.074) and humidity (p=0.053). Conclusions: It was indicated that $CO_2$, temperature and humidity were no effect on dry eye syndrome in the office environment. However TSP, PM10, formaldehyde, and wearing contact lens were effect on dry eye syndrome. Therefore, the entire management of wearing contact lens and the individual evaluation of the indoor air quality are required.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.25-30
• /
• 2010

Purpose: This study was conducted to estimate the changes of corrected diopter and corrected visual acuity with the change in vertex distance. Also we aimed to provide basic data for refraction test. Methods: Using the trial lens, we measured the corrected diopter and corrected visual acuity after performing binocular balance test. We measured the changes of corrected diopter and corrected visual acuity in change of vertex distance. We analyzed statistical significance and relations between vertex distance and corrected diopter and corrected visual acuity. Results: There was no difference in corrected diopter with the change of vertex distance within -1.00D, but the corrected diopter increased with it over - 1.25D. In particular, the change of diopter was largest when the vertex distance increased 15 mm. At over 11.00D, there was large changes of diopter with the changes of vertex distance at 5 mm, 10 mm and 15 mm. On correlation analysis between the vertex distance and the corrected diopter, there was strong correlation (r=0.999 at 5 mm increase of vertex distance, r=0.982 at 10 mm increase and r=0.957 at 15 mm increase) and also there was significant (p<0.01). At the change of visual acuity in increased of vertex distance, the range of a decrease in visual acuity was large when the changes of vertex distance was largest. On correlation analysis between the vertex distance and the corrected visual acuity, there was strong correlation (r=0.969 at 5 mm increase of vertex distance, r=0.985 at 10 mm increase and r=0.994 at 15 mm increase) and also there was significant (p<0.01). Conclusions: The vertex distance was very important at the refraction test and at wearing spectacle. On correlation analysis between the vertex distance and the corrected diopter, and the corrected visual acuity, there was strong correlation and statistically significant. Therefore, the vertex distance should be kept at the refraction using trial lens, and the best fitting was made not to slipping forward, and so we suggested regular refitting of spectacle and the managing method of spectacle were educated to the spectacle wearers.

• Clinical and Experimental Pediatrics
• /
• v.48 no.7
• /
• pp.706-710
• /
• 2005

Purpose : Early diagnosis of congenital hearing loss through the neonatal hearing screening test minimizes language defect. This research intends to identify frequency of congenital hearing loss in infants through neonatal hearing screening test with the aim of communicating the importance of hearing test for infants. Methods : From May 20, 2003 to May 19, 2004, infants were subjected to Automated Auditory Brainstem Response test during one month of birth to conduct the test with 35 dB sound. Infants who passed the 1st round of hearing test, were classified into 'pass' group whereas those who did not were classified into 'refer' group. Infants who did not 'pass' in the hearing test conducted within one month of birth were subjected to re-test one month later, and if classified as 'refer' during the re-test, they were subjected to the diagnosis for validation of hearing loss by requesting test to the hearing loss clinic. Results : There was no difference among the 'pass' and 'refer' group in terms of form of childbirth, weight at birth and gestational age. In the 1st test, total of 45 infants were classified into 'refer' group. Six among 35 who were subjected to re-test(17%) did not pass the re-test, and all were diagnosed with congenital hearing loss. This corresponds to 0.35%(3.5 per 1,000) among total number of 1,718 subjects. Conclusion : In our study the congenital hearing loss tends to be considerably more frequently than congenital metabolic disorder. Accordingly, newly born infants are strongly recommended to undergo neonatal hearing screening test.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.421-435
• /
• 2017

Recently, due to the saturation of ground structures and the overpopulation of pipeline facilities requires to development of underground structures as an alternative to ground structures. Thus, mechanized tunnel construction of the shield TBM method has been increasing in order to prevent vibration and noise problems in construction of the NATM tunnel for the urban infrastructure construction. Tunnel construction plan for the tunnel line should be formed in a sharp curve to avoid building foundation and underground structures and it is inevitable to develop a shield TBM technology that suits the sharp curve tunnel construction. Therefore, this study is about the structural stability technology of the articulation jack, shield jack and skin plate for the shield TBM thrust in case of the mechanized tunnel construction that is a straight and sharp curve line. The construction case study and shield TBM operation principle are examined and analyzed by the theoretical approach. The torque of the cutter head, the thrust of the articulation jack and the shield jack, the amount of over cutting for curve is important respectively in shield TBM construction of straight and sharp curve line. In addition, it is very important to secure the stability of the skin plate structure to ensure the safety of the inside worker. This study examines the general structure and construction of the equipment, experimental simulation was carried out through numerical analysis to examine the main factors and structural stability of the skin plate structure. The structural stability of the skin plate was evaluated and optimizes the shape by comparing the loads of the articulation jack by selecting the virtual soil to be applied in a straight and sharp curve line construction. Since the present structure and operation method of the shield TBM type in domestic constructions are very similar, this study will help to develop the localized shield TBM technology for the new equipment and the vulnerability and stability review.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2010

The paper describes the objectives of Yellow Sea Large Marine Ecosystem (YSLME) project, focusing on procedural and practical aspects. YSLME is a highly productive sea yet possibly one of the most impacted large marine ecosystems, in terms of anthropogenic stressors, due the enormous coastal population. The aim of the YSLME project is the reduction of ecosystem stress through identification of the environmental problems in the Transboundary Diagnostic Analysis (TDA) that are then addressed in the Strategic Action Programme (SAP). One of the major problems found to be affecting biological diversity is habitat modification through wetland reclamation, conversion and degradation. Since the early 1900's more than 40% of intertidal wetlands have been reclaimed in Korea, and 60% of Chinese coastal wetlands have been converted or reclaimed. Damaging fishing practices, pollution and coastal eutrophication have further degraded the coastal environment reducing the biological diversity. To combat this loss, the YSLME project has mounted a public awareness campaign to raise environmental consciousness targeted at all different levels of society, from politicians at parliamentary workshops, local government officer training events, scientific conferences and involvement of scientists in the project research and reporting, to university and high school students in our visiting internship programmes and environmental camps. We have also built networks through the Yellow Sea Partnership and by liaising and working with other environmental organizations and NGOs. NGO's are recognised as important partners in the environmental conservation as they already have extensive local networks that can be lacking in international organisations. Effective links have been built with many of these NGOs through the small grants programme. Working with WWF's YSESP project and other academic and research institutions we have conducted our own biodiversity assessments that have contributed to the science-based development of the SAP for the YSLME. Our regional targets for biodiversity outlined in the SAP include: Improvements in the densities, distributions and genetic diversity of current populations of all living organisms including endangered and endemic species; Maintenance of habitats according to standards and regulations of 2007; and a reduction in the risk of introduced species. Endorsement of the SAP and its successful implementation, during the proposed second phase of the YSLEM project, will ensure that biological diversity is here to benefit future generations.

• Journal of Animal Science and Technology
• /
• v.44 no.1
• /
• pp.123-134
• /
• 2002

An experiment was conducted to establish the most suitable ventilation system for the enclosed nursery pig house in Korea, comparing four different ventilation systems ; i) air enters through perforated ceiling and exhausts through chimney (NA), ii) air enters through perforated ceiling and exhausts through side walls (NB), iii) air enters through perforated ducts and exhausts through side walls (NC) and iv) air enters through perforated ducts and exhausts through chimney(ND). The experiment was carried out during winter and summer separately. The experimental pigs were weaned at fourteen days old in winter (December-February) and at twenty one days old in summer (June-August). The main results of the experiment are as follows : A preliminary experiment showed that in the NC system during summer, air can reach all the pig rooms in the house and the air flow rates of the upper, middle (1.2 m height of the room) and low (at the height of pig stature) parts of the room were measured at 7.0-8.08, over 0.5 and over 0.2 m/s, respectively, which flow rates were much higher(p$<$0.05) than those in other system. At the minimum ventilation efficiency during winter, air flow rates of upper, middle and low parts of the room equipped with the NC system were detected at over 1, less than 0.5 and around 0.07 m/s, respectively. It is concluded that the separated ventilation system air-entering through ducts is the most suitable for the ventilation system of the enclosed nursery pig house and the exhausting system through side walls is more efficient for ventilation than the system through roof. Furthermore, to sustain proper temperature and reduce energy waste as well as heat consumption, a future research should be carried out to develop the environmental control system in relation to developing a heat regulator.

• Journal of Distribution Science
• /
• v.10 no.3
• /
• pp.15-30
• /
• 2012

It has been 10 years since the facility modernization projects of traditional markets was rigorously undertaken. Although more than 835 traditional Korean markets nationwide have already completed these projects, there does not exist a specific set of standards of installation, future maintenance, and management. As a result, the complaints made by civil stakeholders in accordance of the actual facility installation caused problems and delays of related projects. In addition, while some local governments secured and implemented their own differing standards, others have not yet established their own separate standards for maintenance and management. Specifically, 694 traditional markets nationwide were supported for the cost of installing arcades by 2010. For the short period of time after the arcade-supported projects were deployed, the number of the traditional markets had been rapidly growing as a prime example of the facility modernization projects. The arcade facilities are being planned and installed merely for screening the rain or the sun. Without fundamental data for the newly landscaped environments or information on the actual conditions of usage and assessment, there is a lack of comprehensive approaches that could possibly organize the public environments. Furthermore, the amount of support needed for repairs, maintenance, and management from the central and local governments is gradually increasing. Thus, it becomes both crucial and necessary to complement the current set of standards. The purpose of this study is to examine the actual conditions of usage, maintenance, and management among those traditional market facilities that were installed with the supports of the facility-modernization projects, especially for arcades. This will be carried out through investigating the local problems, issues, and considering international case studies. The results of this study will provide measures for effective and efficient installation and management of traditional market arcades. Improvements in the use of public resources could be directed towards transforming public business, as well as public enhancement and functional maintenance and reinforcement. Under this condition, the arcade is not a simple area to avoid rain or sunlight; it becomes a public space. It is highlighted that the arcade should establish its public business not only to activate markets but also to refine street environments and revitalize local communities. A more specific way to improve is introduced through systematic supplementation. This is needed to attract effective participation from local residents and is done so by conducting a fair procedure from the first stage of business and by providing guidelines for establishing arcades as public facilities. The study points out to the problem of merchants-centered plans and street use. It presents the need to expand to involve residents and customers. Given that the arcade is a public facility and merchants' ability to maintain it is limited, manuals and systems for its maintenance needs to be introduced through multi-party agreement of merchants, government, residents and customers.