• Title/Summary/Keyword: 자가 발진

Search Result 69, Processing Time 0.022 seconds

Design of the Self-Oscillation UV Flash Lamp Power Supply and the Characteristic of its Operation Using Self-resonance of the Transformer (트랜스포머의 자가 공진(Self-Resonance) 특성을 이용한 자가 발진(Self-Oscillation) UV 발생 플래시램프 전원장치설계 및 그 동작 특성)

  • Kim, Shin-Hyo;Cho, Dae-Kweon
    • Journal of Korea Ship Safrty Technology Authority
    • /
    • s.37
    • /
    • pp.35-44
    • /
    • 2014
  • 해상 및 육상용 살균방식으로 UV를 사용하는 시스템이 주종을 이루고 있으며, 의료, 생활, 산업용 시스템에 널리 적용되고 있으며, 근래에는 평형수 처리 방식으로 UV를 적용하는 사례가 등장하고 있다. UV 광원으로는 다양한 램프가 있으며 그 중 제논플레시 램프는 강한 섬광형 방전과 함께 다량의 UV를 방출하는 특성이 있어 매우 효과적이다. 다만, 타 광원에 비하여 높은 방전전압으로 인하여 기존의 전원장치 설계 방식으로는 장치의 크기가 크고 복잡한 문제가 있었으며, 이를 개량하기 위한 본 연구에서는 트랜스포머의 자가 공진(self-resonance)을 이용한 설계 기법을 제안하며, 트랜스포머의 특정주파수에서 고유임피던스 성분을 이용하여 출력전압을 필터링하면 제논방전관이 자가 발진방식으로 동작하므로 종래의 회로구성보다 간단하고 경제적인 아크방전 파워 스테이지의 구성이 가능하다.

  • PDF

A study on the feedback control system for near field scanning optical microscope based on the tuning fork oscillator (수정 진동자를 이용한 근접장광학계 (Near-Field Scanning Optical Microscope) 제작 및 특성연구)

  • 윤선현
    • Korean Journal of Optics and Photonics
    • /
    • v.10 no.4
    • /
    • pp.267-272
    • /
    • 1999
  • We attached a fiber tip on the branch of a quartz crystal oscillator in order to make a feedback control system for near field optical microscope. The electrical impedance of the quartz crystal oscillator depends on the distance between the surface of the sample and the tip caused by the surface damping. Using this method, we can directly monitor the distance between the sample and the tip without inserting extra beam which might give extra optical noise. We characterize the XY scanning resolution and the amplitude of the vibrating tip and the Z-dependent decay of the evanescent wave.

  • PDF

Design of a Narrow Band Pass Filter with Crystal Oscillator for NAVTEX Receivers (수정발진자를 이용한 NAVTEX 수신기용 협대역 여파기 설계)

  • Jang, Moon-Kee;Ahn, Jung-Soo;Park, Jin-Soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.5
    • /
    • pp.857-862
    • /
    • 2008
  • This paper evaluate the performance using a simulated 490KHz narrow band filter based on characteristic parameters appropriately extracted from 490KHz band-pass filter after considering each characteristic, which is modeled on equivalent circuit and applied to NAVTEX receiver using crystal oscillator. The evaluation results show that the value of a series capacitor of crystal oscillator has only little capacity by Cs=21.094fF and the bandwidth characteristics of filter go worse as the capacity value of crystal oscillator grow increase. Moreover, the series inductance value of crystal oscillator has a relatively big value by L=5H, therefore the bandwidth characteristic according as inductance's capacity shows more little effect than the capacity.

Output Characteristics of CW DF Laser (연속발진 불화중수소(DF) 레이저 출력특성)

  • 김재기
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.8-9
    • /
    • 2003
  • 본 연구에서는 연속발진 출력을 얻기 위해서 일차적으로 수소와 불소를 연소시켜 발생된 열에너지를 이용하여 불소분자($F_2$)를 원자상태의 불소(F)로 분리하고, 이 불소원자(F)를 초음속 노즐을 통해서 흐르게 한 후 중수소(D$_2$)와 화학 반응시켜 활성매질인 들뜬상태의 중수소분자(D$F_{*}$ )를 얻는다. 발진된 레이저 최대 출력 값은 약 11.5㎾이며, 발진라인은 10개로 최대 세기를 갖는 라인은 Pl(10)-3.752$\mu\textrm{m}$이다. 또한 최적의 유량조건에서 얻은 화학 효율은 약 16 %, specific power는 약 188J/g이다. (중략)

  • PDF

A Development of Jig Circuit for Performance Evaluation of an Oscillator (발진기의 성능평가를 위한 지그 회로의 개발)

  • Lin, Chi-Ho;Yoon, Dal-Hwan
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.45 no.11
    • /
    • pp.95-101
    • /
    • 2008
  • We have used diversely the multilayer ceramic oscillator of the SMD(Surface Mounted Device) package technology that connects the crystal with the chip package. Such an oscillator occurs a stray inductance and a parasitic capacitance by the length and inner pattern. And it has been happened an amplitude attenuation and signal loss due to the reflection of power source and noise component. So we don't evaluate the precise performance of the oscillator for these factors. In this paper we have developed the Jig system to evaluate the performance of the oscillator. Through this system, we will expect an advanced performance of the oscillator and redesign an oscillator of the low jitter characteristics and low phase noise.

Microwave Oscillator Stabilized by Phase-locked Loop (위상고정 Loop를 사용한 안정 징파발진기)

  • 나정웅;김종진
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.12 no.3
    • /
    • pp.20-25
    • /
    • 1975
  • A microwave oscillator stabilized by a phase-locked loop (PLL) is developed. The PLL system is chosen 'compared with the cavity stabilized oscillator in view of the domestic manufacturing, because special machining and materials are needed for the latter. A sampler with a low pass filter is shown to be used as a phase detector in the PLL, and the sampler capable of sampling up to 4GHz is developed for this use. Frequency stability of about 10-6 is obtained from the developed microwave oscillator, operating at 2.16 GHz with more than 120 milliwatts output power, Ivhereby a crystal oscillator operating at about 110MHz is used as a reference source in the PLL. The capturing range of this oscillator is extended up to its lock-in-range of about 10MHz by employing a search oscillator in the system.

  • PDF

Temperature Dependence of the Gain Spectrum of a Quantum Well Laser (양자우물 레이저의 이득 곡선의 온도 의존성)

  • 김동철;유건호;박종대;김태환
    • Korean Journal of Optics and Photonics
    • /
    • v.6 no.4
    • /
    • pp.302-309
    • /
    • 1995
  • We desinged a lattice-matched InGaAs/lnGaAsP quantum well laser that lases at $1.55{\mu}m$ at room temperature, and calculated the gain spectrum as a function of injected carrier density and temperature. For the calculation of band structures and momentum matrix elements, we used a transfer JIlatrix method based on a block-diagonalized 8x8 second-order Ii$.$ P Hamiltonian. This lattice-matched quantum well lases in transverse electric mode. As the temperature increases, the lasing wavelength gets longer, the transparency carrier density increases, and the differential gain is reduced. The temperature dependence of the gain spectrum comes from the temperature dependence of the band structure and that of the Fermi function, and the latter contributes dominantly.nantly.

  • PDF

A Design of the Voltage-Controlled Oscillator for Wireless Subscriber Network (무선가입자회선망용 전압제어발진기 설계)

  • Hur, Chang-Wu;Choi, Jun-Su
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.11 no.12
    • /
    • pp.2205-2209
    • /
    • 2007
  • In this paper, a voltage controlled oscillator(VCO) of core components for wireless subscriber network is designed. The type of oscillator is colpits method and the oscillator device uses a LC resonator. The product is made on FR-4 substrate with dielectric constant of 4.6. The designed VCO is operated at 3.2V, 10mA and has output value of 0.67dB. The VCO's phase noise property is -102DBc/Hz at offset frequence of 100kHz. The fabricated VCO is the same as target value and can be used for wireless subscriber network.

Modulators Using Voltage Variable Capacitance Diode (VVC 다이오드를 사용한 새로운 변조기)

  • 정만영;김영웅
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.6 no.4
    • /
    • pp.20-30
    • /
    • 1969
  • Several new modulators using Voltage Variable Capacitance Diode are discribed. It was investigated that amplitude modulation which does not need modulation power is obtained by mdulation VVC diode as a tuning element of the quartz oscillator circuit. It offers a good AM system for carryphones in the citizen bands. While frequency modulated quartz oscillators coupled with a quarter wave network were tested as a wide band frequency modulator, Hartley type transistor oscillator offers the most stable and reproducibel FM quartz oscillator.

  • PDF