• Title/Summary/Keyword: 자가 공진

Search Result 225, Processing Time 0.019 seconds

Analysis of Natural Frequency According to Span of Foot-bridges (보도교의 구조시스템별 고유진동수 분석)

  • Do, Ki Young;Yoon, Sung Won
    • Journal of Korean Society of Steel Construction
    • /
    • v.26 no.5
    • /
    • pp.375-383
    • /
    • 2014
  • In Seoul, total 166 places of foot-bridges were constructed but a study on correlation between resonance occurrence status by gait vibration and natural frequency by each span and that between span based on structural system and natural frequency is very unsatisfactory in reality. Consequently in this study, time series wave form, power spectrum and natural frequency were analyzed based on resonance occurrence by targeting 65 places of foot-bridges being constructed in Seoul through convenient and simple portable vibration meter.

UWB Bandpass Filter Using Capacitive Coupling with Cross Resonator ("+"자 공진기와 용량성 결합을 이용한 초광대역 대역 통과 여파기)

  • Dong, Thai Hoa;Lee, Jae-Young;Kim, Ihn-Seok
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.5
    • /
    • pp.486-493
    • /
    • 2010
  • This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

Miniaturization Pinger for Biotelemetry (바이오테레메트리용 초음파 핑거의 소형화)

  • 신현옥
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.27 no.3
    • /
    • pp.178-183
    • /
    • 1991
  • 소형 핑거의 크기를 좌우하는 것은 진동자의 크기이며, 진동자의 크기는 주로 사용 주파수와 진동모드에 의하여 정해진다. 이 연구에서는 핑거에 자주 이용되고 있는 링형 진동자와는 진동 모드가 다른 바이모르프형 진동자를 이용하므로써 소형 진동자의 개발이 가능하였으며, 이 진동자를 이용하여 핑거의 소형화를 이룩할 수 있었다. 개발된 진동자의 크기는 50KHz 공진에서 직경 7.3mm, 두께 0.7mm이었으며, 소형화된 핑거는 직경 8.0mm, 길이 30mm의 크기이고, 공기중에서의 중량이 3.5g, 수중중량이 1.8g이었다. 음향 출력 레벨은 3V의 전지를 사용하여 147dB(re $l\muPa$ a at 1m)이었고, 약 3일간 사용 가능하였다.

  • PDF

Evaluation of Mass Variation of Aspheric Glass tens Using Resonant Ultrasound Spectroscopy (비구면 렌즈의 질량변화 평가를 위한 RUS의 적용)

  • Heo, Uk;Im, Kwang-Hee;Yang, In-Young;Kim, Ji-Hoon
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.27 no.2
    • /
    • pp.183-189
    • /
    • 2007
  • Ultra precise processed parts are required together with the development of optoelectronics industry. As important parts of optoelectronics industry, there are ferrule of optical connector and lens for optical devices. In particular, the lens requires high reliability with high precision without including flaws. These optical modules need ultra precise processing in order to reduce the loss of light sources and various nondestructive inspections are carried out in the finishing stage to separate good and bad quality products. Therefore, it was analyzed through the characteristics of response of amplitude and resonant frequency according to the mass variations of aspheric lens that is used currently in laser printers.

Simulation of Sustainable Co-evolving Predator-Prey System Controlled by Neural Network

  • Lee, Taewoo;Kim, Sookyun;Shim, Yoonsik
    • Journal of the Korea Society of Computer and Information
    • /
    • v.26 no.9
    • /
    • pp.27-35
    • /
    • 2021
  • Artificial life is used in various fields of applied science by evaluating natural life-related systems, their processes, and evolution. Research has been actively conducted to evolve physical body design and behavioral control strategies for the dynamic activities of these artificial life forms. However, since co-evolution of shapes and neural networks is difficult, artificial life with optimized movements has only one movement in one form and most do not consider the environmental conditions around it. In this paper, artificial life that co-evolve bodies and neural networks using predator-prey models have environmental adaptive movements. The predator-prey hierarchy is then extended to the top-level predator, medium predator, prey three stages to determine the stability of the simulation according to initial population density and correlate between body evolution and population dynamics.

Case Study of Resonant Interaction with Elevator (고조파 공진으로 인한 엘리베이터 정지사례 분석)

  • Cho, Nam-Hun
    • Proceedings of the KIEE Conference
    • /
    • 2005.11c
    • /
    • pp.76-79
    • /
    • 2005
  • 전력품질 저하로 인하여 수용가 설비에 문제가 발생되었을 경우, 전력품질의 유지 및 관리 책임이 있는 전력회사(판매회사)는 전력품질 저하원인을 규명하여야 한다. 이 경우 전력품질 향상에 필요한 소요 비용은 전력품질 저하원인 제공자가 부담하는 것이 원칙이며, 전력품질 원인 제공자가 전력회사로부터 계속 전력을 공급받기 위해서 수용가는 전력품질 향상을 위한 대책들을 전력회사에 제시하여야 하며, 그 중 비용이 가장 적은 방법을 선택할 수 있다. 이 경우 전력회사는 최선을 다하여 수용가 및 전력회사 측면에서 적절한 대책이 수립될 수 있도록 기술적으로 협조하여야 한다.

  • PDF

Experimental Study for the Resonance Effect of the Power Buoy Amplitude (공진형 전력부이의 상하변위증폭 효과에 관한 실험적 연구)

  • Kweon, Hyuck-Min;Koh, Hyeok-Jun;Kim, Jung-Rok;Choi, Young-Hwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.2
    • /
    • pp.585-594
    • /
    • 2013
  • In this study, laboratory experiments and numerical simulations were conducted to test the performance of resonance power buoy system proposed by Kweon et al.(2010). The system is composed of a linear generator and a mooring buoy. The mover of the linear generator mainly has heave motion driven by vertical oscillation of the buoy. In this system, the velocity discrepancy between the mover and the buoy makes electricity. However, ocean wave energy as a natural resource around Korean peninsula is comparatively small and the driving force for producing electricity is not enough for commercialization. Therefore, it is necessary that the buoy motion be amplified by using resonance characteristics. In order to verify the resonance effects on the test power buoy, the experimental investigations were conducted in the large wave flume (length of 110 m, width of 8 m, maximum depth of 6 m) equipped with regular and random plunger wave generator. The resonance draft of test power buoy is designed for the corresponding period of incident wave, 1.96 sec. Regular wave test results show that the heave response amplitude operator(RAO) by a test buoy has the amplification of 5.66 times higher compared to the wave amplitude at the resonance period. Test results of random waves show that the buoy has the largest spectrum area of 20.73 times higher at the point of not the resonance period but the shorter one of 1.85 sec. Therefore this study suggests the resonance power buoy for wave power generation for commercial application in the case of the coastal and oceanic area with smaller wave energy.

Analysis of the Redox Reaction for Polypyrrole Thin Film by Using a Quartz Crystal Analyzer (수정진동자 분석기(QCA)를 이용한 폴리피롤 박막의 산화-환원반응 해석)

  • Chang, Sang-Mok;Kim, Jong-Min;Park, Ji-Sun;Son, Tae-Il;Hiroshi, Muramatsu
    • Applied Chemistry for Engineering
    • /
    • v.9 no.1
    • /
    • pp.44-51
    • /
    • 1998
  • In this work, the in-situ viscoelastic characteristics of electropolymerized polypyrrole (PPy) thin film were investigated in the electrolyte solutions of $NaClO_4$, $LiClO_4$, and $KClO_4$ by using quartz crystal analyzer (QCA). One side of quartz crystal was used as a working electrode mounted in a special fabricated QCA electrochemical ceil. The resonant frequency and resonant resistance diagram (F-R diagram) was used to interpret the viscoelastic characteristics of Pby thin film and compared with AFM photograph. The resonant frequency, resonant resistance, and current were measured to analyze the redox reaction behaviors when the cyclic voltammetry was performed using AT-cut quartz crystal electrode coated with galvanostatically polymerized Ppy film. The result suggests that the Ppy film polymerized onto the crystal behaves as a rigid elastic layer at the initial stage of electropolymerization, while the film becomes a viscoelastic layer the polymerization proceeds further. At the same time, the film thickness increases and some morphological changes take place due to the penetration of electrolyte solution into the film. These phenomena take place when cyclic voltammetry was performed using different electrolyte solution compared with polymerization process.

  • PDF

회전기계의 불평함에 대한 감수성과 민감도 ( II )

  • 양보석;임우섭
    • Journal of the KSME
    • /
    • v.29 no.2
    • /
    • pp.169-174
    • /
    • 1989
  • 기계의 운전 중에 불평형이 변화할 확률은 예측하기가 어렵다는 것에 대해서는 이미 지적한바 있다. 따라서 계산은 미감도의 평가로 한정된다. 이 값은 공진에 인접하여 운전될 때의 특수 한 경우에 대한 것이다. 계산의 정확도를 지나치게 높이 평가하지 않도록 주의할 필요가 있다. 이러한 속도에서 계의 감쇠는 특히 중요하며, 복잡한 계에 있어서는 충분한 정확도를 갖도록 이 감쇠값을 계산할 수는 없다. 따라서, 설계자는 감쇠값의 결정에 있어서 부분적으로 경험에 의 존해야 한다.

  • PDF