• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.96-96
• /
• 2004

고성능 섬유강화 복합재는 비강성과 비강도가 높고 내부식성과 피로특성이 우수하지만 외부에서 가해지는 하중에 의해 수지, 강화섬유와 수지와의 경계면, 적층 경계면 등에 육안으로 식별하기 어려운 손상이 유발될 가능성이 있으며 이로 인해 구조재로서의 역할을 하지 못하는 경우가 발생한다. 최근에는 외부하중으로 인해 복합재 구조재에 손상이 발생한 경우 자가치료제가 저장된 마이크로캡슐을 이용하여 손상을 보수하려는 시도가 행해지고 있다.(중략)

• Composites Research
• /
• v.15 no.2
• /
• pp.32-39
• /
• 2002

This study focused on the introduction of processing procedure for microcapsules loaded with the healing agent and then microcapsules with the healing agent were manufactured by experiments. The DCPD (dicyclopentadiene) was used for the healing agent and the shell of microcapsules was consisted of urea-formaldehyde resin. The magnitude and the site distribution of microcapsules were measured by a particle size analyzer using laser diffraction technique. Thermal analysis was conducted by using a DSC fur the healing agent, microcapsules without the healing agent, and microcapsules with the healing agent. Also thermal stability was investigated by using a TGA under continuous and isothermal heating conditions far the healing agent, microcapsules without the healing agent, microcapsules with the healing agent. According to the results. microcapsules with the healing agent were verified to be so thermally stable that the healing agent could not evaporate until the shell of microcapsules were burned.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.51-59
• /
• 2006

The physical characteristics of autonomic microcapsules manufactured with various agitation speeds in a stirred tank were observed experimentally by a particle size analyzer and an optical microscope. The flow characteristics in a stirred tank were also investigated through a 3-dimensional numerical simulation to understand the manufacturing process of autonomic microcapsules. According to the results, we found that the agitation speed was the important factor to determine the sizes of microcapsules. The impeller-induced flow allowed the jet and tip-vortex pair components in the mixed fluid of a stirred tank. The vorticity around the blades in the impeller was increased as increasing the agitation speed. In addition, the size of autonomic microcapsules was strongly affected on the small scale mixing pattern such as a tip-vortex pair.

• Composites Research
• /
• v.16 no.2
• /
• pp.54-61
• /
• 2003

In this study, manufacturing process for microcapsules with the self-healing agent was introduced and the characteristics of microcapsules manufactured by varying with various manufacturing process variables were evaluated through a particle size analyzer, an optical microscope, and a TGA. Urea-formaldehyde resin was used for the thin wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The various manufacturing process variables, such as (1) 24hr, 40hr, 48hr, 60hr of the solution time of the EMA copolymer, (2) pH3.5, pH4.0, pH4.5 of the hydrogen ion concentration of the emulsified solution, (3) 400rpm, 500rpm, 600rpm, 1000rpm of the agitation speed of the emulsified solution, (4) $50^{\circ}$, $55^{\circ}$, $60^{\circ}$ of the reaction temperature of the emulsified solution, were considered. According to the results, the particle size distribution of microcapsules was affected on the agitation speed, and the thermal stability of microcapsules was influenced by the solution time of the EMA copolymer, the hydrogen ion concentration, and the reaction temperature of the emulsified solution. Therefore, suitable manufacturing process variables should be applied to obtain thermally stable microcapsules capable of containing the healing agent capable until the thin wall of microcapsules were to be burned.

• Composites Research
• /
• v.28 no.5
• /
• pp.316-321
• /
• 2015

This study investigated the effects of microcapsules on mechanical properties and thermal stability of the composite material containing self-healing microcapsules. To this end, tensile specimens and flexural specimens containing melamine-urea-formaldehyde (M-U-F) shell walled microcapsules with diameters of $70{\sim}130{\mu}m$ were manufactured. Varying amount of microcapsules in the specimens was considered: 0 wt%, 0.5 wt%, and 1.0 wt%. The tensile and flexural tests were conducted to evaluate mechanical properties of the specimens containing the microcapsules and the thermogravimetric analysis test was performed to evaluate the thermal stability of the specimens containing the microcapsules. The results show that the tensile strength of the specimens was sensitive to the amount of the microcapsules compared to the tensile modulus even though the tensile modulus of the specimens was not significantly affected by the amount of the microcapsules. However, reduction of the tensile strength was not linearly proportional to the amount of microcapsules; similar results were observed in the flexural test. The weight changes of the specimens containing the microcapsules, as a function of temperature, were similar to those specimens without microcapsules. The thermal stability of the specimens was not affected significantly by the microcapsules embedded in the specimens.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.508-511
• /
• 2004

This study focused on the effect of autonomic microcapsules on the mechanical properties of structural material. Several types of microcapsules with healing agents were manufactured by varying agitation speed of high speed stirrer. The size distribution of microcapsules was measured by a particle size analzer. The epoxy specimens embedded with microcapsules were manufactured and the degree of cure of such epoxy specimen was measured by a differential scanning calorimetry. The tensile modulus and tensile strength in epoxy specimens embedded with microcapsules were evaluated in order to investigate the effects of microcapsules on mechanical properties of structural materials. The configuration of microcapsules and morphology of fracture surfaces for the epoxy specimen were examined by an optical microcope and a scanning electron microscope. According to the results, tensile strength of the epoxy specimen embedded with microcapsules was indicated a little reduction, but tensile modulus was not much affected on microcapsules.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.793-796
• /
• 2003

This study dealt with the manufacturing process of self-healing microcapsules for damage repair in polymeric composites. The microcapsule was consisted with a DCPD (dicyclopentadiene) as the healing agent and a urea-formaldehyde resin as the wall section. The size distribution of microcapsules were measured by a particle size analyzer using a laser diffraction technique. Thermal stability of microcapsules was investigated by using a TGA under continuous and isothermal heating conditions. According to the results, these microcapsules were verified to be to thermally stable and have a great potential to be applicable for damage repair in polymeric composites.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.135-141
• /
• 2001

An experimental study to find the effect of processing parameters for self-healing microcapules is performed. These microcapsules can be applied to accomplish the healing of delamination damage in woven E-glass/epoxy composites. This paper introduces the self-healing concept and presents a method for solving the microcapsule size and shape. Additionally, processing parameters are varied during the formation of microcapsules and these capsules are observed through optical microscope. To obtain thermogravimetric(TG) curve for the manufactured microcapsules, TGA tests are executed. From these results, the best processing conditions for the formation of capsules are found as follows: (1) temperature of solution $ 50^{\circ}C$, (2) potential of hytdrogen(pH) 3.5ppm, and (3) agitation 500~600rpm.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1668-1673
• /
• 2008

고분자 복합재 구조물의 경우 일반적으로 여러 층의 단층(laminar)이 적층된 구조로 이루어져 있으며, 모재균열, 층간분리 및 섬유파단과 같은 손상이 발생되어 파단에 이르게 된다. 자가손상 복구기법은 복합소재의 열경화성 수지 내에 손상복구액을 포함하고 있는 마이크로캡슐과 촉매를 투입하여 외부의 도움 없이 손상을 치료할 수 있는 방법으로, 소재의 디자인에 있어서 새로운 페러다임을 제공할 수 있는 것으로 현재 많은 연구가 진행되고 있다. 본 연구에서는 ENB(5-ethylidene-2-norbornene)와 DCPD(dicyclopentadiene)에 대하여 DMA(dynamic mechanical analysis)와 DSC(differential scanning calorimetry)를 이용하여 특성을 분석하였다. 또한 그들의 ROMP(ring-opening metathesis polymerization)반응과의 관계를 조사하였으며, ENB와 DCPD 블렌드에 대한 복구액으로서의 특성도 조사하였다. 본 연구실에서 합성된 두 가지 다른 종류의 ROMP 경화제에 대한 실제 자가손상복구에으로서의 적용상 특성도 연구하였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.65-68
• /
• 2002

This study dealt with autonomic microcapsules with the healing agent for damage repair of the composite structures. Autonomic microcapsules were made of a urea-formaldehyde resin for shell of microcapsule and a DCPD for the healing agent. Thermal analysis was conducted by using a DSC and a TGA for the healing agent, microcapsules without the healing agent, and microcapsules with the healing agent. According to the results, autonomic microcapsules were verified to be so thermally stable that the healing agent was kept inside the microcapsule until the shell of microcapsules were burned out.